• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.56-59
• /
• 2003

This paper presents new interpolation algorithm for measuring high resolution position information which is propered to nano servo control motor using analog quadrature encoder. In the past, there is a large memory and two high price A/D converter for high resolution analog quadrature encoder interpolation. but this paper show that it can make high resolution interpolate using small memory, one A/D converter and comparator. Experimental results show that the proposed algorithm for high resolution position is useful.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.658-661
• /
• 1996

For ultraprecision positioning, the use of the twist roller-type friction drive is proposed. In our study, it is difficult to decrease the resolution of positioning below 100 nm when we use general servo motors. Therefore we propose the feed hive with a small lead like a the cam-roller type traction drive leadscrew and modify it more accurately. By using the semi-loop control system, the positioning resolution of the drive can be 22.4 nm, where the pulse per revolution of the motor is 655360 and the the lead is 0.734 mm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.671-677
• /
• 1996

This paper proposes a study on the effects of motion errors for acceleration/ deceleration types. The proposed motion errors are consisted of two errors : one due to transient response of servomechanism and the other due to gain mismatching of positioning servo motor. They are derived from using laplace transformation for the block diagram of general purpose feed drive system. In order to minimize them, the paper proposes second order polynomial regression model by using orthogonal array method which describes one of experimental methodolgies. The validity and reliability of the study was veri lied on a vertical machining center equipped with FANUC 0MC through a series of experiments and analyses.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.3
• /
• pp.135-140
• /
• 2008

This paper researched about Development Cutting Tool User Defined Module Based(PMCUDMS) on Simulation that was able to adapt themselves to rapid development of software and hardware to adopt. It is basic research that develops a scheme whereby technic make property. This paper theorized about to realize Cutting Tool User Defined Module Based on Simulation which is developing CNC Software flows from building Windows XP operating system's image that is possible realtime acting and multitasking to correct. And Cutting Tool User Defined Module Based on Simulation component which was consisted of basis OS, NC Code parser, Servo Motor Control, Simulator, Man-Machine Interface.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.78-81
• /
• 1995

본 연구에서는 슬라이딩 모드를 전기유압식 심실보조기의 직류모터제어기의 속도와 위치제어에 적용하였다. 슬라이딩 모드 컨트롤은 가변구조시스템(varaiable sturucture system)의 일종으로 적절한 내부스위칭 논리를 갖는 연속적인 부시스템(subsystem)의 모임으로 구성된다는 접에서 고정된 제어구조를 갖는 일반적인 제어시스템과 다르다. 이 시스템은 불연속적인 동적시스템이나 시변적인 요소를 갖는 시스템등에서 사용되고 있다. 이 논문에서는 슬라이딩 모드 제어를 적용하여 좌심실보조기를 제어하는 경우에 넓은 작동범위에서도 시스템이 안정적이며 혈류역학적인 외란에 대해서도 기준입력에 대한 속도의 추종이 잘 이루어지는지의 여부를 실제의 구현에 앞서 컴퓨터모델을 통해 검증하고 문제점들을 조사하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.89-97
• /
• 2003

The faults diagnosis of machine tool, which is controlled by CNC(Computer Numerical Control) and PLC(Programmable Logic Controller), is generally based on ladder diagram of PLC because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching of logical relationship for fault reasons is required a lot of diagnosis experiences and times because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault fast and correctly. The diagnosed reasons for fault are remote serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.71-74
• /
• 2002

본 논문에서는 유전알고리즘(GA)을 이용한 PID계수 자동조정기법에 관한 DC 서보 모터 속도 제어기 설계를 목적으로 한다. DC 서보 모터는 수많은 제어용 기계나 로봇 등의 응용분야에 사용되고 있고 이러한 분야에서 제어기 파라미터들의 선택이 사용자의 전문적인 지식을 요구하게 된다. 따라서 일반적인 공정 기술자들은 시행착오에 의해 제어기 파라미터들을 계속적으로 반복 조절해 나가야 한다. 이와 같이 동적 시스템의 변화나 외란에 대하여 파라미터 계수를 자동 조정해야 할 경우 유전알고리즘을 사용함으로써 보다 정밀하고 최적화된 파라미터 계수값을 추종함에 따라 그 성능을 높일 수 있다. 본 논문에서는 DC 모터의 동특성을 분석하여 얻은 동특성 모델링으로부터 응답 특성이 빠르고 속도 정밀도가 향상된 구동제어가 가능한 제어기를 설계하고 이를 PID제어기와 비교 평가하였다.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.139-145
• /
• 2006

This paper describes the ultra precise position estimation of a servomotor using a sinusoidal encoder based on Arcsine Interpolation Method for the cost reduction of circuit design. The amplitude and offset errors of the sinusoidal encoder output signals, from the encoder itself and analog signal processing procedures, are effectively compensated and on-line tuned by utilizing a low cost programmable differential amplifier without any special expensive equipment. For a theoretical evaluation of the practical resolution of this system, the relationship between the amplitude of ADC(Analog to Digital Converter) input signal errors and the anticipated resolution is also addressed. The performance of the proposed method is verified by comparing it with speed control characteristics of the servomotor driving system using a digital incremental 50,000ppr encoder in the experiments.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.165-167
• /
• 2003

인터넷의 비약적인 발달은 제어시스템의 설계 및 운영에도 많은 영향을 미치게 되어 지금까지와는 전혀 다른 시스템 구현이 가능한 환경으로 만들어 가고 있다. 이와 같은 배경에서 본 연구에서는 그동안 실험연구용으로 사용하던 서보시스템의 PID 제어방법을 인터넷을 기반으로 한 새로운 방법의 원격제어 시스템으로 구현하였다. 본 논문에서는 NI사의 DAQ보드와 TY36A모터 보드를 사용하여 서보모터의 속도 위치를 web상에서 원격 제어하는 시스템 구현 방법을 제안하였다. LabVIEW 프로그래밍에서 인터페이스 부분은 Graphical한 프로그래밍 기법을 사용하여 모터의 제어와 작동상태의 모니터링이 용이하도록 하였으며, 최적한 PID 이득값을 설정하여 원하는 속도 및 위치응답 특성이 양호한 제어를 할 수 있게 하였다. 나아가 인터넷상에서 원격제어의 가능성을 활용하여 산업체에서의 활용범위를 넓히고, 가상 교육환경의 가능성을 열었다.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.34-38
• /
• 2020

In this paper, we implement a Dashcam system capable of shooting 360 degrees using a Raspberry Pi, shock sensors, distance sensors, and rotating camera with a servo motor. If there is an object approaching the vehicle by the distance sensor, the camera rotates to take a video. In the event of an external shock, videos and images are stored in the server to analyze the cause of the vehicle's accident and prevent the user from forging or tampering with videos or images. We also implement functions that transmit the message with the location and the intensity of the impact when the accident occurs and send the vehicle information to an insurance authority with by linking the system with a smart device. It is advantage that the authority analyzes the transmitted message and provides the accident handling information giving the user's safety and convenience.