• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.4
• /
• pp.14-20
• /
• 2004

In this work, a new control methodology to achieve accurate position control of an AC servo motor subjected to external disturbance is proposed. Unlike conventional sliding mode controller which requires a prior knowledge of the upper bound of external disturbance, the proposed technique, called sliding mode controller with disturbance estimator (SMCDE), can offer robust control performances without a prior knowledge of the disturbance bound. The SMCDE is featured by an integrated average value of the imposed disturbance over a certain sampling period. By doing this, undesirable chattering phenomenon in the estimation process can be effectively alleviated. The benefits of the proposed control methodology are empirically demonstrated on AC servo motor and control responses are evaluated through a comparative work between the proposed and conventional control schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.377-382
• /
• 1993

The low speed control of a servo motor using instantaneous speed detection method is described. To estimate the instantaneous speed from the average speed, the speed estimator of the first or second order is used. We confirm that these estimatorsimprove the speed control performance of a servo system with experiments.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.480-483
• /
• 2003

This paper deals with speed control of Sensorless DC servo motor using a FTHGO(FuzEy-Tuning High Gain observer). In this paper, we improved the problem from row speed section, the problem of sensor for detecting speed of motor, using FTHGO(Fuzzy-Tuning High-Gain Observer) with fuzzy control technique which is a class of adaptive control technique. In order to verify the performance of the FTHGO(Fuzzy-Tuning High Gain Observer) which is proposed in this paper, it is proved from the experiment to compare the case with a speed sensor to the case with FTHGO(Fuzzy-Tuning High Gain observer) in the speed control of DC servo motor.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2747-2749
• /
• 2005

This paper presents an intelligent control system for an ac servo motor dirve to track periodic commands using a neural network. AC servo motor drive system is rather similar to a linear system. However, the uncertainties, such as machanical parametric variation, external disturbance, uncertainty due to nonideal in transient state. therefore an intelligent control system that isan on-line trained neural network controller with adaptive learning rates.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.26-28
• /
• 1993

DD motor, with large rotor inertia & wide range of torque, is different from other servo motor in control & drive characteristic. In this paper, for the development of flexible DD robot, we introduced the h/w & s/w technics of DSP to construct the velocity, position & torque control strategies and integrated 2 axes special purpose DD servo dirver into one VME bus.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.218-223
• /
• 1993

In this paper, we present a full digital control scheme which controls currents and speed of the permanent magnet AC servo motor with large range of bandwidth and high performance. The current equations of the permanent magnet AC servo motor are linearized by feedback linearization technique. Both acceleration feedforward terms and IP controllers, whose gains are functions of motor speed, are used in order to control motor currents. In addition the phase delays in current control loops are compensated by placing phase lead-lag compensators after current commands, which make it possible to avoid high gains in the current controllers. Unity power factor can be achieved by the proposed current controller. Pulsewidth modulation is performed by way of the well-known comparison with a triangular carrier signals. The velocity controller is designed on the basis of the linearized model of the permanent magnet AC servo motor by the proposed current controller. The performance of the entire control system is analyzed in the presence of uncertainty in the motor parameters. The proposed control scheme is implemented using the digital signal processor-based controller composed of an Analog Device ADSP 2111 and a NEC78310. The pulsewidth modulation (PWM) signals are generated through a custom IC, SAMSUNG-PWM1, which has the outputs of current controllers as input. The experimental results show that the permanent magnet AC servo motor can be always driven with high dynamic performance by the proposed full digital control scheme of motor speed and motor current.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.206-215
• /
• 2013

In this paper, a synchronization control technique of dual-servo motor driven press system is proposed. An independent cascade PID control technique has been applied to the conventional press system for advancement of control stability. However, it is not easy to reduce synchronous error using the independent cascade PID control technique when some different load disturbances are involved in each motor. The eccentric error of the slide caused by the problem degrade the control performance of the BDC(Bottom Dead Center). In order to achieve reduction of the synchronous error between two servo motors and accurate position control simultaneously, a new control scheme comprised with cascade PID control loop and cross-coupling loop is proposed. In simulation using Matlab SIMULINK, the AC servo system is designed. The control performance of proposed technique is compared with conventional control technique to the model of AC servo system. Also, the sub-scale model of dual-servo motor driven press system which can replicate the slide motion is constructed for experimental verification for the performance of the proposed control technique. The cross-coupling control technique reveals more precise and stable performances in the position and synchronization controls.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.580-585
• /
• 1986

This paper deals with "chattering" problem in variable structure control system. For digital computer control, chattering reduction algorithm in Analog-VSC is extended to Discrete-VSC. The proposed algorithm is applied to position control of D.C Servo Motor by using 6502 .mu.-processor. The improved transient response, as well as a considerable reduction of chattering, is illustrated experimentally.imentally.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.262-273
• /
• 1992

In this study, we selected a DC servo motor as an actuator of the marine diesel engine governor and constructed the position control system of the DC servo motor using the algorithm proposed by authors. Next, we proposed an another method to construct an adaptive control system for marine diesel engine by regarding the controlled system including the DC servo motor as a second order controlled system and verified the validity of this method through the real time control responses. Finally, the results have shown a good response characteristic.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.3
• /
• pp.56-63
• /
• 1989

In recent years, a.c servo motors have been gradually replacing d.c sevo motors in various high-performance demanded aplications such as machine tools and industrial robots. In particular, the high-performance slip-frequency control of an induction motor, which is often called the vector control, is considered one of the best a.c drive. In this paper, the transient state equation and vector control algrithms of an induction motor are described mathematically by using the two-axis theory(d-q coordinates). According to the result of these algorithms, we scheme the speed control system for an induction type ac servo motor in which vector control is adopted to give tha a.c motor high performance. Motor drive is a PWM inverter using power MOS-FET, and is controlled in order to let the actual input current of the motor track the current reference obtained from a microcomputer(8086 cpu). Driving experiments are performed in the range of 0 to 3000 rpm, and it is verified that high speed response is possible.