• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.380-383
• /
• 2003

This paper proposes a new and simple input prediction method for robust servo system. This servo system uses robust tracking control system based on both Coprime Factorization(CF) and Zero Phase Error Tracking control system. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness and disturbance rejection ability The optical disk tracking servo system can detect only the tracking error. So the new and simple input prediction system proposed in this paper estimates the reference input signal from the tracking error. Numerical simulation results show that the proposed method is effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1044-1047
• /
• 1996

In this paper, GMDH(Group Method of Data Handling) algorithm, which is based on heuristic self organization to predict and identify the complex system, is applied to the control system of DC servo motor. The mathematical relation between input voltage and motor speed is obtained by GMDH algorithm. A design method of model following control system based on GMDH algorithm is developed. As a result of applying this method to DC servo motor, the simulation and experiment have shown that the developed method gives a good performance in tracking the reference model and in rejection of disturbance, in spite of constant load and changing load.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.880-882
• /
• 1995

The systematic function of the PLC (Programmable - Logic Controller) has been enhanced immensely due to the various special modules that consist of the conventional I/O control contants plus special function, which enables the flexible application to highly advanced systems. Position control module is one of the various PLC special module. In this paper, we proposed new synchronized operating method and implemented 8 - axis servo control system. The validity of proposed method is verified througth experimental results and it will be possible to expand 32 - axis servo control system by RS - 485 communication spec.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1577-1585
• /
• 2011

This paper proposes a posture stabilization control algorithm for a wheeled mobile robot using hybrid visual servo control method with a position based and an image based visual servoing (PBVS and IBVS). To overcome chattering phenomena which were shown in the previous researches using a simple switching function based on a threshold, the proposed hybrid visual servo control law introduces the fusion function based on a blending function. Then, the chattering problem and rapid motion of the mobile robot can be eliminated. Also, we consider the nonlinearity of the wheeled mobile robot unlike the previous visual servo control laws using linear control methods to improve the performances of the visual servo control law. The proposed posture stabilization control law using hybrid visual servoing is verified by a theoretical analysis and simulation and experimental results.

• 융합신호처리학회논문지
• /
• 제5권3호
• /
• pp.210-215
• /
• 2004

교류 서보전동기 동적 모델은 비선형이고 2차 저항이 변동영향이 많다. 이러한 복잡한 제어는 견실제어가 요구된다. 이러한 시스템의 동특성은 슬라이딩 모드제어를 사용함으로 파라미터나 외란 변동에 대하여 견실성을 달성할 수 있다. 본 논문은 교류 서보전동기에 의한 위치제어에 슬라이딩 모드 제어의 적용을 나타내었다. 제어방법이 유도되고 제어시스템이 설계되었다. 교류 서보전동기의 견실제어를 위해 외부 부하 파라미터에 기초한 설계방법이 제안되었다. 제안된 제어방법은 가변구조 제어기와 슬립주파수형 벡터제어에 기초하여 주어졌다. 시뮬레이션 결과는 관성모우먼트, 점성마찰 및 부하외란 변동에 결실함을 나타내었고 슬라이딩 모드를 적용한 제안된 설계방법이 유용한 것을 구명한다.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.112-115
• /
• 2003

산업 자동화의 고정밀도에 따라 서보 제어시스템은 강인제어가 요구되고 있다. 그러나 서보 제어시스템이 외란의 영향을 받게 되면 제어시스템의 강인제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 주 제어기(PID)와 미분 관리제어기의 혼합형 제어기법을 제시하였다. 주 제어기는 궤환제어기로서 동작하고, 미분 관리제어기는 외란에 의한 불안정한 상태에서 보조적인 동작을 한다. 미분 관리제어기의 강인성은 전통기의 속도제어에 의해서 확인하였다.

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2449-2457
• /
• 1996

This paper presents a design method for autopilot control system in course change to the specified direction based on a robust digital servo controlmelthod incorporating the concept of the annihilator polynormial. The mathematicalmodel of ship turning motion is very complex in the view of practical control because it has time varying parameters, nonlinear and dead time terms. To apply the digital servo control method based on computer control, the model is linearized at an equilibrium point and discretized with appropriate sampling time. The control algorithm was evaluated on the basis of computer simulation for a model ship and the practical experiment was carried out with an image processing method for measurement of ship position in a water tank. The results of overall experiments show that the proposed control method will be one of good way to keep a track plotted in the map.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1309-1314
• /
• 2003

The high precision positioning mechanism is used in various industrial fields. It is used in semiconductor manufacturing line, test instrument, Bioengineering, and MEMS and so on. This paper presents a positioning mechanism with dual servo system. Dual servo system consists of a coarse stage and a fine motion stage. The course stage is driven by VCM and the actuator of fine stage is the PZT. The purposes of dual servo system are stability, higher bandwidth, and robustness. Lead compensator is applied to this control system, and is designed by PQ method. Designed compensator can improve property of positioning mechanism.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.1-10
• /
• 2005

This paper proposes a new and simple input prediction method for robust servo system. A robust tracking control system for optical disk drives was proposed recently based on both Coprime Factorization (CF) and Zero Phase Error Tracking (ZPET) control. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness to parameter uncertainties and disturbance rejection capability. Since optical disk tracking servo system can detect only tracking error, it was proposed that the reference input signal for ZPET could be estimated from tracking errors. In this paper, we propose a new control structure for the ZPET controller. It requires less memory than the previously proposed method for the reference signal generation. Numerical simulation results show that the proposed method is effective.