• 한국압력기기공학회 논문집
• /
• 제7권1호
• /
• pp.17-26
• /
• 2011

CANDU reactor core is composed a few hundreds pressure tubes, which support and locate the nuclear fuels in the reactor. Each pressure tube provides pressure boundary and flow path of primary heat transport system in the core region. In order to guarantee the structural integrity of pressure tube flaws which can be found by in-service inspection, crack growth and fracture initiation assessment have to be performed. Stress intensity factors are important and basic information for structural integrity assessment of planar and laminar flaws (e. g. crack). This paper reviews and confirms the stress intensity factor of axial crack, proposed in CSA N285.8-05, which is an fitness-for-service evaluation code for pressure tubes in CANDU nuclear reactors. The stress intensity factors in CSA N285.8-05 were compared with stress intensity factors calculated by three methods (finite element results, API 579-1/ASME FFS-1 2007 Fitness-For-Service and ASME Boiler and Pressure Vessel Code Section XI). The effects of Poisson's ratio and anisotropic elastic modulus on stress intensity factors were also discussed.

• 유통과학연구
• /
• 제19권6호
• /
• pp.5-19
• /
• 2021

Purpose: O2O Service is a major internet-based distribution industry. The purpose of this study is to confirm the effects of positive psychological capital on job intensity, customer orientation, and the mediating effects of trust of O2O employee. Research design, data and methodology: This study aims to identify the effect of positive psychological capital on customer orientation and job intensity through empirical analysis. 475 questionnaires were used for the final analysis using random sampling methods from O2O employees working at leading distribution companies for hypothesis verification. The analysis methods used for hypothesis testing in this study were analyzed using the SPSS 21.0 statistical package. Results: Empirical analysis shows that it is an important factor in increasing job intensity and customer orientation, and that company trust has a significant influence through mediating effects among variables. Conclusions: In order to enhance job intensity and customer orientation for O2O distribution workers, it is necessary to change efforts with management efforts for positive psychological factors and trust. It is also believed that company trust should be considered as an important factor in the future leadership competency development system in that it can promote positive psychological capital, further strengthening job intensity and customer orientation.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.796-804
• /
• 2003

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failures occur from cracks subjected to mixed-mode loading. Hence, it is necessary to evaluate the fatigue behavior under mixed-mode loading. Under mixed-mode loading, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. In modified range 0.3$\leq$a/W$\leq$0.5, the stress intensity factors (SIFs) of mode I and mode II for the compact tension shear (CTS) specimen were calculated by using elastic finite element analysis. The propagation behavior of the fatigue cracks of cold rolled stainless steels (STS304) under mixed-mode conditions was evaluated by using K$\_$I/ and $_{4}$ (SIFs of mode I and mode II). The maximum tangential stress (MTS) criterion and stress intensity factor were applied to predict the crack propagation direction and the propagation behavior of fatigue cracks.

• Journal of Preventive Medicine and Public Health
• /
• 제26권3호
• /
• pp.442-456
• /
• 1993

Financial stability is the foremost prerequisite for the continuous growth and development of hospitals. The present study aimed at developing a deterministic model using the factors which affect the hospitals profitability and at discovering which factor affected the hospital profitability. The study conducted questionnaire surveys on all general hospitals, with the exception of special hospitals, with over eighty hospital beds. Of the 274 subject hospitals, 136 of them, consituting 49.6% of the whole, were used in the study. The results are as follows. 1. In the deterministic model, outpatient revenue was affected more by the number of physician visits than by outpatient service intensity. Inpatient revenue was found to be affected more by the number of discharged patients than by inpatient service intensity. However, the increase rate of the service intensity not only contributed in stepping up the operating margin by $4{\sim}8%$ in outpatient and $3{\sim}6%$ in inpatient, but it was statistically significant. 2. Among the factors which determined the operating cost within the deterministic model, the number of patients had a greater impact on the operating cost than the resource consumption per patient. 3. The resource consumption per patient were proved to have the greatest effect on the profitability within the probabilistic model. The management cost per adjusted patient, in particular, was proven to have a statistically significant effect on the profitability in all hospitals.

• Structural Engineering and Mechanics
• /
• 제81권5호
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• Structural Engineering and Mechanics
• /
• 제72권1호
• /
• pp.31-41
• /
• 2019

Structural integrity assessment of piping components is of paramount important for remaining life prediction, residual strength evaluation and for in-service inspection planning. For accurate prediction of these, a reliable fracture parameter is essential. One of the fracture parameters is stress intensity factor (SIF), which is generally preferred for high strength materials, can be evaluated by using linear elastic fracture mechanics principles. To employ available analytical and numerical procedures for fracture analysis of piping components, it takes considerable amount of time and effort. In view of this, an alternative approach to analytical and finite element analysis, a model based on relevance vector machine (RVM) is developed to predict SIF of part through crack of a piping component under fatigue loading. RVM is based on probabilistic approach and regression and it is established based on Bayesian formulation of a linear model with an appropriate prior that results in a sparse representation. Model for SIF prediction is developed by using MATLAB software wherein 70% of the data has been used for the development of RVM model and rest of the data is used for validation. The predicted SIF is found to be in good agreement with the corresponding analytical solution, and can be used for damage tolerant analysis of structural components.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.131-139
• /
• 2001

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failure occur from cracks subjected to mixed mode loadings. Hence, it is necessary to evaluate the fatigue behavior under mixed mode loading. Under mixed mode loading conditions, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. The mode I and II stress intensity factors of CTS specimen were calculated using elastic finite element method. The propagation behavior of the fatigue crack of the STS304 steeds under mixed mode loading condition was evacuated by using stress intensity factors $K_I$ and $K_II. The MTS criterion and effective stress intensity factor were applied to predict the crack propagation direction and the fatigue crack propagation rate.

• 국제지역연구
• /
• 제22권4호
• /
• pp.19-35
• /
• 2018

본 논문은 분석기간 1975:1-2016:4에 걸쳐 한국의 제조업과 서비스업을 대상으로 확률변경 함수로서 초월대수(Translog) 생산함수를 이용하여 총요소생산성을 추정하였다. 또한 추정된 총요소생산성에 영향을 미치는 결정요소로서 산업의 구조와 특성을 반영하는 마크업, 자본탄력도 그리고 수입중간재비중을 포함하는 자기회귀시차모형을 설정하여 총요소생산성의 결정 요소탄력도를 추정하였다. 총요소생산성 증가율은 분석기간 평균값이 제조업은 0.0199 그리고 서비스업은 0.0063으로 추정되었다. 총요소생산성의 마크업탄력도는 제조업은 2.481로 양(+)의 값을 나타낸 반면 서비스업은 -1.403으로 음(-)의 수치를 보이고 있다. 자본집약도 탄력도는 제조업은 0.651 그리고 서비스업은 0.042로 추정되었다. 이러한 실증결과는 산업구조와 특성을 반영하는 마크업과 자본집약도가 제조업과 서비스업의 총요소생산성에 영향을 미치는 중요한 결정변수임을 밝히고 있다.

• 한국해양공학회지
• /
• 제16권5호
• /
• pp.80-87
• /
• 2002

In this study, CT specimens were prepared from spring steel(SUP9) which was used in suspension of automobile for room temperature and low temperature service. We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, ­3$0^{\circ}C$, ­5$0^{\circ}C$, ­7$0^{\circ}C$ and ­10$0^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.120-128
• /
• 1995

The fatigue failure of rail is a principal source of derailment accidents. The reduction of fatigue failures can be achieved by Intensive track maintenance and periodic safety assessments for the railway. For the safety assessments, it is required to have more accurate knowledge for fatigue behavior such as the crack initiation, propagation, crack growth rate and the remaining service life in rail. In this paper, the mean stress effects for the fatigue behavior of rail steel are studied. For this study, the fatigue test is conducted and some equations for fatigue evaluation are applied and compared. From the results, we can see that the fatigue crack growth rate is the more increased as the men stress Is the more increased, the mean stress effect is represented well by the combination of stress intensity factor range and maximum stress intensity factor and Crooker and Range's equation represented by ${\Delta}K, K_{max}$ is the best fit for fatigue evaluation and safety assessment of rail.