• Journal of Korean Society for Quality Management
• /
• v.27 no.4
• /
• pp.167-190
• /
• 1999

The purpose of this study is to develop the hotel service quality measurement attributes and dimensions which have higher validity and reliability than before. The procedures of this study is as follows: First, the attributes and dimensions are developed through the rigorous analysis of literature review. Second, the attributes and dimensions which have been developed are refined after the pilot survey. Third, the final survey used for criterion-related validity test, reliability test and factor analysis. Eventually, twenty seven attributes and six dimensions are extracted and discussed.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.67-84
• /
• 2019

In order to suggest ways to enhance service competitiveness in cruise and destination, this study developed a measure of cruise tour service and analyzed the impact and relative importance on customer satisfaction. Specifically, for the service quality analysis, based on the SERVPERF model, the specialty of the industry was reflected through the arguments of tourism and transport logistics, and the three factors of cruise service quality and destination service quality were derived and utilized as measurement tools. As an analysis method, factor and reliability analysis were conducted using data collected via a survey. Next, correlation analysis was conducted to analyze the relationship between variables and regression analysis was performed to check the impact of cruise tour service quality on customer satisfaction. The study found that both cruise service attributes and destination service attributes had a positive effect on customer satisfaction and that the relative importance of service attributes was identified. Accordingly, it was found that the service quality should be formed by reflecting arguments in the tourism and transport logistics sectors and that the service should be further improved and developed according to the importance of the service attributes so as to enhance cruise tour products.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.527-539
• /
• 2013

Purpose: Methods for increasing health-care service quality are considered for a women-centered hospital located on a local city. A walk-through audit is applied to uncover areas for improvement. Methods: A survey questionnaire with 25 questions is constructed based on a service blueprint for a walk-through audit, and a survey is conducted both to patients and service providers to assess a health-care service quality. Frequency analysis, statistical tests and customer-provider analysis are used to analyze surveyed data. Results: According to customer-provider analysis, 6 attributes belong to 'problem unawareness' zone in which they are rated high by service providers but low by patients, and another 6 attributes belong to 'problem awareness' zone in which they are rated low by both groups. These attributes are considered to be improved with priority. Conclusion: Both patient group and service provider group have lots of different perceptions on most attributes that are examined, and the hospital to be studied is, in general, competitive in technical quality and less competitive in functional quality.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.55-78
• /
• 2016

In this study, service quality attributes of uTradeHub were classified based on the Kano model, and quality attributes that should be managed in priority to improve the service quality of uTradeHub were investigated using Timko's customer satisfaction coefficient(CSC) and average satisfaction coefficient(ASC). The results of the study are summarized as follows. First, as a result of classifying service quality attributes based on Kano model, 12 one dimensional qualities, 5 must-be qualities, 2 indifferent qualities were deducted, and many quality attributes of uTradeHub service were confirmed to be one dimensional quality to which is needed to be paid attention and paid more detailed attention to enhance service quality. Second, in the analysis result using Timko's customer satisfaction coefficient, "post processing for problems and complaints", "cost reduction", "efficiency of business processing" were ranked in the top of satisfaction coefficient, and they found to be quality attributes that customer satisfaction increases when service quality was satisfied. While, "post processing for problems and complaints", "interaction", "ability to respond promptly when problems occur" were ranked in the top of unsatisfaction coefficient, and they were analysed to be quality attributes that customer complaints increase when service quality was unsatisfied. Third, in the result of analyzing the quality attributes that should be managed in priority to improve the service quality of uTradeHub based on the average satisfaction coefficient(ASC), "post processing for problems and complaints", "cost reduction", "useful information" were ranked in the top 3, and they were classified as quality attributes that the satisfaction level increases more when they are improved than now, but the satisfaction level decreases when they are worsen.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.5
• /
• pp.605-615
• /
• 2008

The principal objective of this study was to categorize service attributes on the basis of the asymmetric and non-linear relationship existing between service attributes and customer satisfaction. Researchers generally assume that service attribute performances and customer satisfaction are both symmetrical and linear. That is to say, improvements in attribute performance will inevitably result in increased customer satisfaction. However, this is not always the case. Certain attributes have been shown not to create satisfaction even when improved, and others do not create dissatisfaction even when their performance ratings become negative. Understanding this relationship is crucial not only to researchers, but also to service managers. Service managers can arrange their priorities with regard to which attributes must be improved or promoted first, in an environment of limited technical, financial, and human resources. Many studies into this asymmetric and non-linear relationship have recently been conducted, beginning with Herzberg's motivation-hygiene theory (1976) and the disconfirmation theory, which was eventually developed into Kano's model (1984). This study attempted to determine the impact level of service attributes on incidents of satisfaction or dissatisfaction. It used 30 service attributes generated by Park (2008) in the CIT research into family restaurants. The data were collected from 600 participants, 300 incidences of satisfaction and 300 incidents of dissatisfaction, via an online survey. The t-test was used to confirm the difference between the satisfaction group's and dissatisfaction group's attributes. 11 attributes were found to be significant at a level of p>0.05. This indicates that the 11 attributes exerted different impacts on satisfaction and dissatisfaction, which confirmed the asymmetric and non-linear relationship. 14 attributes were categorized into the core service, 1 attribute into the quality service, 7 attributes into the basic service, and 8 attributes into the neutral service. Strategic customer service management was recommended for the 'A' family restaurant as an example, on the basis of the asymmetric and non-linear relationship and the characteristics of the four service factors.

• Korean Journal of Community Nutrition
• /
• v.17 no.4
• /
• pp.479-493
• /
• 2012

This study was conducted to investigate quality attributes which could affect foodservice satisfaction by the year (2005, 2008, 2011) and dining area (classroom vs. dining hall) in order to find ways to improve school lunch service and foodservice satisfaction of middle school students. The numbers of those surveyed were 1,103 students in 2005, 1,917 students in 2008, and 1,921 students in 2011. Overall foodservice satisfaction was significantly increased gradually in dining hall food service: $3.29{\pm}1.21$ in 2005, $3.45{\pm}1.00$ in 2008, $3.94{\pm}0.98$ in 2011. In classroom food service, overall foodservice satisfaction was not significantly different between in 2005 ($3.09{\pm}0.97$) and in 2008 ($2.98{\pm}1.02$), but it was significantly increased in 2011 ($4.05{\pm}1.00$). Stepwise multiple regression analysis showed that overall foodservice satisfaction was most affected by the taste of food. The importance of 11 quality attributes except food sanitation and gathering feedback on school meals was significantly increased in 2011 compared with 2005. Food sanitation among 13 attributes was most important attribute in 2005 and 2011. The numbers of quality attributes affecting students' overall foodservice satisfaction were 5 to 7 by year, those attributes were almost identical with attributes which students thought importantly. Therefore, in order to increase the overall foodservice satisfaction of the school lunch service continually, it is recommended to identify the quality attributes that are important to students, and to check their levels of performance in order to overcome their differences.

• International Journal of Quality Innovation
• /
• v.10 no.2
• /
• pp.109-126
• /
• 2009

The purpose of this study was to examine overall customer satisfaction associated with medical service quality in Taiwan by integrated Kano's model and customer satisfaction index model. Another purpose was to confirmed nonlinear and asymmetric relationship of Customer Satisfaction and Quality Performance by the research outcome. By analyzing 1,100 patients or their family members, this study used the structural equation model (SEM) with AMOS software for data analysis. The results show that must-be attributes, one-dimensional attributes and attractive attributes had a direct effect on overall customer satisfaction, Surprisingly, overall customer satisfaction had positively influenced customer loyalty customer satisfaction had negatively influenced customer complaints. The study also found that customer complaints have direct effect on customer loyalty. Importantly, the study found out the must-be attributes, the attractive attributes and one-dimensional attributes increased, the level of overall customer satisfaction also increased. The customer satisfaction positively influences customer loyalty in medical service quality in Taiwan. The findings might reveal new insights for researchers dealing with quality of medical service and for hospital managers who devote resources exclusively to achieving highest possible levels of patient satisfaction.

• Journal of the Korean Dietetic Association
• /
• v.16 no.3
• /
• pp.208-225
• /
• 2010

Our research consisted of a qualitative study investigating the quality attributes of university foodservices through focus group interviews and a quantitative study evaluating service quality of university foodservices through a survey. Sixteen quality attributes were derived and customer satisfaction questionnaires included these 16 quality attributes with a five-point Likert scale. An Importance-Performance Analysis (IPA) model was applied in order to identify operational strategies necessary to improve service quality. The survey questionnaires were distributed to 600 university students enrolled in a university located in Kwangju and statistical analysis was performed on 555 surveys using an SPSS package. Overall customer satisfaction with the quality of university foodservices was relatively low (under 3.0) while the expectation was inclined to be high (over 4.0). The main reasons for using the university foodservice were given as inexpensive price (67.6%) and time saving (22.9%). A factor analysis of 16 quality attributes revealed two separate factors: food quality (Cronbach's alpha=0.911) and service quality (Cronbach's alpha=0.934). Variety of menu, convenient location, and sanitation of utensils and facilities were identified by an IPA model as factors needing improvement in operational strategies.

• Journal of Community Nutrition
• /
• v.7 no.1
• /
• pp.58-63
• /
• 2005

Identifying quality attributes with the greatest value to the residents is important if the Continuing Care Retirement Community (CCRC) is to increase the frequency of residents' dining. However, it is not known which specific attribute is relatively more important than others to evaluate foodservice. The purpose of this study is to identify the relative importance of food and service quality attributes in the evaluation of foodservice in CCRe. This study surveyed the independent living residents of three CCRCs in the Midwestern states. Respondents placed great importance on taste and flavor of food which has the highest percentage of utility range ($28.28\%$) and the second greatest on appearance of the server ($23.46\%$) . The important attributes were ultimately used to predict the most preferred choice of food-service for residents. Knowledge of the importance of the attributes would enable the foodservice managers in CCRCs to manipulate those attributes to enhance the residents' perceptions of quality and identify strategies for continuous improvement.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.137-150
• /
• 2017

Logistic enterprises want to be competitive enterprises in fierce logistic market and worry about the securement of discriminative competitiveness for it. The standards for the judgement of logistic industry's maintenance of competitiveness are not only economic feasibility of logistic costs but also the satisfaction of users because well-established service system for variety and enhancement of logistic needs. Some of the quality attributes sufficiently satisfy expectation of customers, but not guarantee high-quality satisfaction. Therefore, it's difficult to grasp quality attributes with the existing approach of perceived service quality. Quality attribute model suggested by Kano is widely used as the concept is accurate, there is high possibility to be used at the stage of product/service planning, and it can be easily applied. Kano model has a limitation that quality attributes are classified with mode and the differences between strong property of the quality attribute and week property in quality attributes were ignored. Therefore, Timko calculated customer satisfaction coefficient with the result of Kano's survey and effects of customer satisfaction and unsatisfaction through relations between satisfaction coefficient and unsatisfaction coefficient. The purposes of this study are to use ASC, the average of satisfaction coefficient and unsatisfaction, as the satisfaction of quality characteristics, decide the importance of quality characteristics with TOPSIS, a representative multi-standard decision-making method, and calculate strategy improvement propriety of logistic service quality.