• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.

• Korean Journal of Community Nutrition
• /
• v.12 no.5
• /
• pp.617-629
• /
• 2007

To ensure the microbiological safety of food items prepared after cooking process, this study was aimed to identify the hazards related with cooked foods donated to foodbanks through quantitative microbial analysis. Five foodbanks located in Incheon and Gyeonggi area among government-dominant foodbanks were surveyed from February to June, 2007. Manager, recipient, donator, type and quantity of donated foot and facility and equipment were examined for the general characteristics of foodbank. The time and temperature of food md environment were measured at steps from after-production to before-distribution, and the microbial analysis was performed mainly with indicator organism and major pathogens. The amount of cooked foods donated to each foodbank was about 20 to 30 servings and consisted of 80% of total donated foods. Only three foodbanks had separate offices for foodbank operation and four institutions had at least one temperature-controlled vehicle. The flow of donated foods was gone through the steps; production, meal service and holding at donator, collection by foodbank, transport (or holding after transport) and distribution to recipients. It took about 3.8 to 6.5 hours at room temperature from after-production to before-distribution. Only aerobic plate counts (APC) and coliforms were found in microbial analysis. The APC after production were relatively high in $8.2{\times}10^5,\;7.4{\times}10^5,\;6.9{\times}10^5$ and $4.2{\times}10^5 CFU/g$ while $2.8{\times}10^6, \;9.4{\times}10^5,\;1.0{\times}10^6$ and $5.4{\times}10^5CFU/g$ before distribution in mixed Pimpinella brachycarpa, mixed chard mixed amaranth and mixed spinach, respectively. The levels of coliforms in mixed chard and mixed spinach were complied with the standards of the Ministry of Education and Human Resources Management The level of APC in boiled pork was increased from $< 1.0{\times}10 CFU/g$ to $4.0{\times}10^2 CFU/g$. One of delivery vessels was shown $6.2{\times}10^3 CFU/100 cm^2$ in APC, which was over the standards for environment. One of serving tables also showed the high level of $1.2{\times}10^3 CFU/100 cm^2$ in APC and $6.6{\times}10^2 CFU/100 cm^2$ in coliforms. These results suggest the sanitary management of holding at donator and the time-temperature control are key factors to ensure the safety of cooked foods donated to foodbank.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.16-29
• /
• 2016

The total area of paddy field was estimated to be 55 % of the cultivated lands in South Korea, which is approximately 1 million hectares. Organisms inhabiting paddy fields if they are sensitive to environmental changes can be environmental indicator of paddy fields. Biological indicators such as phenology and distributional range are evaluated as intuitive and quantitative method to analyze the impact of climate change. This study aims to estimate flight time change of Hydrophilidae species' based on the RCP 8.5 climate change scenario. Unmanned monitoring systems were installed in Haenam, Buan, Dangjin and Cheorwon relative to the latitudinal gradient. In the three regions excepting Cheorwon, it was able to measure the abundance of flying Hydrochara affinis and Sternolophus rufipes. Degree-day for the flight time was determined based either on field measurement values and estimates of 2020s, 2050s and 2080s from KMA climate change scenario data. As a result, it is found that date of both species of initial flight becomes 15 days earlier, that of peak flight becomes 22 days earlier and that of final flight does 27 days earlier in 2080s compared to 2020s. The climate change impact on flight time is greater in coastal area, rural area and valley than inland area, urban area and plan. H. affinis and S. rufipes can be used as climate change indicator species.

• Quality Improvement in Health Care
• /
• v.3 no.1
• /
• pp.104-124
• /
• 1996

Background : In these days, the health care organizations have concerned about customer-centered care in order to empower the competitiveness on the health care markets. The departments working for quality management of the hospitals have used health care quality indicators in terms of medical areas as well as service areas of the hospitals. However, there were insufficient efforts to develop the credible measurement to seek the customers' needs, their expectations and their satisfaction levels related to health care services because various kinds of challenges were in the process of scale development to measure customers' satisfaction in health care. The purpose of this study was to develop the satisfaction scale to health care services in a Korea health care organization and to test its tool with validity and reliability. Method : The concept of this tool was acceptability that one of the components of health care quality defined by Donabedian. Acceptability has the five dimensions of concept: Accessibility; Patient-Practitioner Relations; Amenities; Patient Preferences as to the effects of care; and Patient Preferences as to the costs of care. The Satisfaction Tool to Health Care Services was reviewed by expert panel with five researchers, including hospital managers and a professor related to quality management of the hospitals. As a result, the content validity index was .84 in the outpatient satisfaction tool. The inpatient satisfaction tool had .87 of the content validity index. The Satisfaction Tools to Health Care Services finally consisted of 44 items for outpatients/their families and of 60 items for inpatients/their families. Study subjects of the construct validity test were 479 outpatients/their families and 561 inpatients/their families who visited or admitted at a University hospital from July 1, 1996 through August 10, 1996. The data were examined by Factor Analysis with SPSS. Result : The items of Satisfaction tools for outpatients/their families were categorized by eleven factors with eigenvalue greater than 1.0 accounting for 64.2 percent of the variation in item scores. Also, the items of inpatient tool had eleven factors with eigenvalue greater than 1.0 accounting for 60.3 percent of the variation in item scores. The reliability of overall scale were .95 and .96 for the outpatients/their families satisfaction scores and inpatient/their families satisfaction scores. The internal consistency reliability with eleven factors was ranged from .30 to .94 for inpatients/their families. The Satisfaction Tool with eleven factors for inpatients/their families had internal consistency reliability ranged from .53 to .89. Conclusion : The Satisfaction Tools to Health Care Services focused on outpatients/their families and inpatients/their families developed in this study had a high reliability and the strong evidence of content validity and construct validity based on quality concept. Therefore, this tool would be utilized as a credible quality indicator of health care services to assess the quality problems and to monitor the quality improvement activities in Korean Health Care Organizations.

• Journal of Korean Public Health Nursing
• /
• v.2 no.2
• /
• pp.21-44
• /
• 1988

In Korea, fee-for service reimbursement has been adopted from the begining of medical insurance system in 1977, and the importance of the relative value unit is currently being investigated. The purpose of this study was to find out the level of propriety of the difference in the fees for different surgical services, and the appropriateness of the classification of the insurance fee schedule. For the purpose of this study, specific subjects and the procedural methodology is shown as follows: 1. The propriety of the Relative Price System(RPS). 1) Choice of sample operations. In this study, sample operations were selected and classified by specialists in general surgery, and the number of items they classified were 32. For the same group of operations the Insurance Fee Schedule(IFS) classified the operations into 24 separate items. In order to investigate the propriety of the RPS, one of the purpose of this study, was to examine the 24 items classified by the IFS. 2) Evaluation of the complexity of surgery. The data used in this study was collected The data used in this study was collected from 94 specialists in general surgery by mail survey from November I to 15, 1986. Several independent variables (age, location, number of bed, university hospital, whether the medical institution adopt residents or not) were also investigated for analysis of the characteristics of surgical complexity. 3) Complexity and time calculations. Time data was collected from the records of the Seoul National University' Hospital, and the cost per operation was calculated through cost finding methods. 4) Analysis of the propriety of the Relative Price System of the Insurance Fee Schedule. The Relative Price System of the sample operation was regressed on the cost, time, comlexity relative ,value system (RVS) separately. The coefficient of determination indicates the degree of variation in the RPS of the Insurance Fee Schedule explained by the cost, time, complexity RVS separately. 2. The appropriateness of the classification of the Insurance Fee Schedule. 1) Choice of sample operations. The items which differed between the classification of the specialist and the classification of medical, Insurance Fee Schedule were chosen. 2) Comparisons of cost, time and complexity between the items were done to evaluate which classification was more appropriate. The findings of the study can be summarized as follows: 1. The coefficient of determination of the regression of the RPS on-cost RVS was 0.58, on time RVS was 0.65, and on complexity RVS was 0.72. This means that the RPS of Insurance Fee Schedule is improper with respect to the cost, time, complexity separately. Thus this indicates that RPS must be re-shaped according to the standard element. In this study, the correlation coefficients of cost, time, complexity Relative Value System were very high, and this suggests that RPS could be reshaped I according to anyone standard element. Considering of measurement, time was thought to be the most I appropriate. 2. The classifications of specialist and of the Insurance Fee Schedule were compared with respect to cost, time, and complexity separately. For complexity, ANOVA was done and the others were compared to the different values of different classifications. The result was that the classification of specialist was more reasonable and that the classification of Insurance Fee Schedule grouped inappropriately several into one price unit.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.41-52
• /
• 2015

MOLIT (Minister of Land, Infrastructure and Transport) authorized Indoor Spatial Information as Basic spatial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little advantage to utilize as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilize for the maintenance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial Information with data visualization. The open-sources of IFC Exporter, a inner program of Revit (Autodesk Inc), is used to output Indoor Spatial Information. Directs 3D Library is also operated to visualize Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilized in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UAV (Unmaned Areal Vehicle), the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial information policy, high level of interoperability as indoor spatial information objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.129-140
• /
• 2017

Global solar radiation was calculated in this research using ground-base measurement data, meteorological satellite data, and GWNU (Gangneung-Wonju National University) solar radiation model. We also analyzed the accuracy of the GWNU model by comparing the observed solar radiation according to the total cloud cover. Our research was based on the global solar radiation of the GWNU radiation site in 2012, observation data such as temperature and pressure, humidity, aerosol, total ozone amount data from the Ozone Monitoring Instrument (OMI) sensor, and Skyview data used for evaluation of cloud mask and total cloud cover. On a clear day when the total cloud cover was 0 tenth, the calculated global solar radiations using the GWNU model had a high correlation coefficient of 0.98 compared with the observed solar radiation, but root mean square error (RMSE) was relatively high, i.e., $36.62Wm^{-2}$. The Skyview equipment was unable to determine the meteorological condition such as thin clouds, mist, and haze. On a cloudy day, regression equations were used for the radiation model to correct the effect of clouds. The correlation coefficient was 0.92, but the RMSE was high, i.e., $99.50Wm^{-2}$. For more accurate analysis, additional analysis of various elements including shielding of the direct radiation component and cloud optical thickness is required. The results of this study can be useful in the area where the global solar radiation is not observed by calculating the global solar radiation per minute or time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1095-1101
• /
• 2001

Spinach was minimally processed into the unseasoned side dish to be used for Korean food service industry, using the techniques of cook-chill and sous vide. Spinach was blanched at 10$0^{\circ}C$ for 6 minutes, vacuum-packaged in the unit of 500 g by plastic film of low gas permeability, pasteurized at 9$0^{\circ}C$ and then cooled rapidly at 3$^{\circ}C$. The chilled products were then stored at 3 and 1$0^{\circ}C$ with measurement in their quality. Six log cycle (6D) inactivation of Listeria monocytogenes and 13 log (13D) thermal destruction of Streptococcus faecalis were compared as two pasteurization conditions, which corresponded to heating for 22.8 and 30.0 minutes at 9$0^{\circ}C$, respectively. Milder heat processing based on 6D process of L monocytogenes gave better quality of color, texture, ascorbic acid and chlorophyll than the conditions of 13D process of S. faecalis. Any microbial growth in total aerobic, psychrophilic and anaerobic bacteria was not observed until 8 days at 1$0^{\circ}C$ and 14 days at 3$^{\circ}C$, which might be regarded as strict guidelines of shelf life. Storage times based on the changes in physical and chemical quality were longer than those based on strict microbial quality in case of the products pasteurized by 6D process of L. monocytogenes. The seasoned vegetables prepared from sous vide processed spinach were found to be inferior in sensory quality to those from freshly blanched one.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.67-80
• /
• 2017

Today, Emotional Intelligence of the leader has become important in order to achieve the achievement of the organization. Especially, the automobile industry is somewhat conservative and the organizational culture of the subcontractor is still much more important than the service industry which has a flexible. In this context, I examine the Emotional Intelligence on Organizational Citizenship Behavior and Innovative Behavior in manufacture of automobile industry focusing on moderating effect of Authentic Leadership. This Study enhances the understanding of Emotional Intelligence and extends the research. Future research will needed to pioneer research methods such as various aspects of measurement and time series of various variables.