• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.4
• /
• pp.635-640
• /
• 2009

In this study, muffins were made with the addition of 0%, 3%, 6% and 9% of Chungkukjang powder and, the quality characteristics, such as volume, height, appearance, chromaticity and moisture contents, were measured using SEM (Scanning Electronic Microscope) measurement, texture tests and sensory tests. In the regards to volume, as the added amount of added Chungkukjang increased, the volume also increased. There was no significant difference in the height and moisture content of the muffins at the different Chungkukjang powder concentrations. Using SEM, it was shown that as the amount of added Chungkukjang increased, the gluten content decreased, which in turn caused the formation of thick cell membranes and rough pores and reduced gluten composition capacity. Luminosity L value in Chungkukjang muffin decreased as the amount of added Chungkukjang powder increased. There was significant difference in the red chromaticity a value and yellow chromaticity b value among the samples (p<0.05). The results of the texture test showed that the hardness of the Chungkukjang muffin decreased as the amount of added Chungkukjang increased. In addition, as the amount of added Chungkukjang increased, the adhesiveness decreased. There was no significant difference in springing, chewiness and gumminess among the samples. There was a significant difference in the cohesiveness among all other samples in cohesiveness (p<0.05). The results of the sensory test showed that the wave form of the Chungkukjang muffin decreased as the amount of added Chungkukjang increased. The pore of the muffin increased as the amount of added Chungkukjang increased. The color quality of the muffin decreased as the amount of added Chungkukjang increased. In terms of overall acceptability, 6% Chungkukjang was shown to result in the highest preference level.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.4
• /
• pp.359-369
• /
• 2016

In this study Ragwort, which had various and excellent pharmacological activity, was selected as a functional material, and intended to present an optimum condition of Ragwort Injeolmi by the blanching method, commonly used in the field. The general components, antioxidation, and dietary fiber of Ragwort were analyzed, and produceableness of Ragwort added Injeolmi was reviewed through instrumental inspection and sensory evaluation of various adding ratio of lyophilized Ragwort power and Ragwort pre-processed by blanching. It was proved that the SOD-likely active of Ragwort was 45.69%, total poly- phenol content was 12.45 mg, and total flavonoid content was 10.25 mg. The pH of Injeolmi adding Ragwort powder showed an increasing trend in the order of 0%, 1%, 3%, 5%, while that of Injeolmi adding blanching Ragwort showed increasing trend in the order of 0%, 10%, 15%, 20%, and there were significant difference (p<0.001). The soluble solid content of all sample groups showed constant value, and it was understood that no sugar was added in the process. From chromatography measurement result, a-value (redness) of 1% sample group was the lowest, and there were significant differences among sample groups (p<0.001). During 3 days of storage period, total microbial count of Injeolmi showed increasing trend while the storage period was getting longer. From the acceptability test Injeolmi adding blanching Ragwort had shown generally higher value.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.47-63
• /
• 1994

An important parameter in characterizing mobile communication channel is delay spread. This paper presents the results of measured delay profiles and calculated distribution funcations of delay spread for typical cellular service environments at Taejon and vicinities. The measurement system uses 1023 chip length, 5 Mbps PN code and sliding correlation method. It has been evaluated by using commercial hardware channel simulator for reliability of out data. As results the value of mean delay spread is 2.08 $\mu\textrm{s}$for suburban area. 2.12 $\mu\textrm{s}$ for urban area and 1.3 $\mu\textrm{s}$ for national/local road. Delay spread is less then 3.4$\mu\textrm{s}$, 2.8$\mu\textrm{s}$ and 1.5 $\mu\textrm{s}$ for probability of 50% and 4.5$\mu\textrm{s}$, 4.2$\mu\textrm{s}$ and 2.9$\mu\textrm{s}$ for probability of 90% at each tested site. The difference of delay spread is within 7% between going and returning status along same street. In this experiment, we found delay spread for suburban area is larger than reported foreign test results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.529-534
• /
• 2002

It was recommended for all ship engaged in international voyages to carry the dedicated Digital Selective Calling receiver, DSC equipment, VHF transceiver, etc according to Global Maritime Distress & Safety System. Also International Maritime Organization recommended for navigation and communication equipments to applicate the EMC regulations, therefore most of electronic equipments using in the vessel to be faced with problems to cope with new regulations. This study has applied and analyzed the EMC for an equipment integrated with Ch.70 dedicated DSC receiver, DSC equipment, VHF transceiver and groped for solutions to cope with. The test has applied the electromagnetic interference such as the measurement for unwanted emissions from conductive & radio emission and the electromagnetic susceptibility such as the immunity from voltage, frequency variation and electro static discharge, hence comes to be understand the problems related with the power and the earth.

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.2
• /
• pp.100-111
• /
• 2017

Evaluating the performance of R&D Activity is complicated because it is hard to quantify the R&D results unlike the traditional manufacturing or service industries. Recently, to overcome this, process-focused evaluation methods applying the philosophy of quality into R&D environment have been introduced. However, these quality activities are mainly conducted without feedback system after the evaluation work is done. The aim of this study is to present a R&D quality diagnosis framework to obtain the improvement opportunities from R&D process perspective. The research is designed as follows : First, R&D standard process and R&D quality elements are derived from a literature review. Second, the diagnosis objects are obtained by investigating the R&D quality elements at each R&D steps. Third, a two-dimensional diagnosis model, which enables the objective measurement of the 'system compatibility' and 'accomplish level', is presented. The proposed method can provide an effective way to find opportunities for efficient quality improvement of R&D process.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.225-229
• /
• 2017

Micron-sized dextran particles, which now attract wide attention as a promising drug delivery systems, can be prepared via the supercritical anti-solvent (SAS) process. In SAS process, dextran particles are obtained as a result of recrystallization of dissolved dextran in dimethyl sulfoxide (DMSO) on addition of supercritical $CO_2$ as an anti-solvent. In this work, with an intention to provide information on the feasible operating conditions of the process, the phase behavior of Dexran/DMSO/$CO_2$ is observed by measuring the cloud point in favor of a variable volume cell. From the experimental study, it is concluded that a feasible operating condition of the SAS process for preparation of dextran particles would be 300.15 K~330.15 K and 90 bar~130 bar, respectively, and solute concentration ranges from 5mg/ml to 20 mg/ml.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.157-165
• /
• 2007

The Work-Related Musculoskeletal Disorders (WMSDs) can be occurred by various factors such as repetition, forceful exertions and awkward postures. Especially, occurrences of the WMSDs on the waist and lower limb are reported in workplaces, demanded standing postures for a long time, in service and manufacturing industry. The static and standing postures without movement for a long time increase work loads to the lower limb and the waist. Accordingly, anti-fatigue mat or anti-fatigue insole is used as a preventing device of the WMSDs. However anti-fatigue mats are limited in space and movement. In this study, multi-elastic insoles are designed and shown the effects of the workload reduction for a long time under the standing work. The foot pressures and EMG (Electromyography) are measured at 0 hour and after 2 hours by 6 health students in their twenties. The 6 prototype insoles are designed with three elastic (Low, Medium and High). These insoles are compared with no insole (insole type 7) as control group. The EMG measurement was conducted to waist (erector spinae muscle), thigh (vastus lateralis muscle) and calf (gastrocnemius muscle). The foot pressure is analyzed by mean pressure value and the EMG analysis is investigated through MF (Median Frequency), MPF (Mean Power Frequency) and ZCR (Zero Crossing Rate). The results of the foot pressure show that the multi-elastic insoles had smaller foot pressure value than that of no-insole. Moreover, Insole 2 and Insole 3 have the smallest increasing rate in foot pressure. The EMG results show that the multi-elastic insoles had smaller EMG shift value than that of no-insole in 2 hour, and then shift value shows the smallest value in Insole 2. Therefore, this study presents that the multi-elastic insoles have reducing effects of the work load for a long time standing work in both side of foot pressure and EMG.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.375-381
• /
• 2011

This study presents an analysis of $CO_2$ emission reduction effect on bus information system (BIS) which is operated to improve various services of bus transit such as rapid and on-time service. Although the Intergovernmental Panel on Climate Change (IPCC) released three methodological types of models for analyzing the amount of greenhouse gas reduction, this study used the Tier 3 method that is the most concrete one. A case study was performed to a 8.3 km section of Daejun-Chungjoo BIS system, and dataset required to the Tier 3 method was obtained from ITS-based surveillance systems. The study result showed that the reduction effect of $CO_2$ on BIS operation was yearly $39.45tCO_2/km$. Therefore, such effect can be potentially useful to a measurement of effectiveness (MOE) of BIS projects hereafter.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.244-244
• /
• 2017

Recently, A study is actively underway to apply to various industries, which are one of the major changes in the key drivers of the industry 4.0.. The data generated by the ship include various indicators such as the fuel volume, engine power, ground speed, speed, speed, main engine rpm, DFOC, SFOC, and FOC. This paper analyzes the sensitivity of the Gathering data and analyzes the impact energy efficiency of the vessel operation by analyzing the influence among each parameter, using the mathematical models, you create an surrogate model using the math model, comparative analysis of actual measurement data and predictive results were analyzed. Through the use of big data analysis technology, it is possible to identify the sensitivity between the energy efficiency related variables of the ship, The possibility of utilization of fuel efficiency indicators using of the surrogate model is identified.

• The Journal of Information Systems
• /
• v.17 no.3
• /
• pp.205-233
• /
• 2008

This study suggests the dynamic value chain model, that will be able to not only show changing processes to organization's significant capital by integrating an individual, implicit, and explicit knowledge which affect organizational decision making, but also distinguish the key driver for raising organizational competitive power because it makes possible to analyze sensitivity of performance along with decision making alternatives and policy changes from dynamic view by connecting knowledge management capability, knowledge management activity, and relations with organizational performance with specific strategic map. Recently, a lot of organizations show interest in measuring and evaluating their performance synthetically. In organizations taking knowledge management, they introduce effective value chain model like a dynamic balanced scorecard (DBSC), and therefore they can reflect their knowledge management condition as well as show their changes by checking performance of established vision and strategy periodically. Furthermore, they can ask for their inner members' understanding and participation by communicating with and inspiring their members with awareness that members are one of their group, present a base of benchmarking, and offer significant information for later decision making. The BSC has been a successful framework for measuring an organization's performance in various perspectives through translating an organization's vision and strategy into an interrelated set of key performance indicators and specific actions. The BSC, while having significant strengths over traditional performance measurement methods, however, has its own limitations, due to its static nature, such as overlooking two-way causation between performance indicators and neglecting the impact of delayed feedback flowing from the adoption of new strategies or policy changes. To overcome these limitations, this study employs SD, a methodology for understanding complex systems where dynamic feedback among the interrelated system components significantly impact on the system outcomes. The SD simulation model in the form of DBSC would serve as a useful strategic teaming tool for facilitating an organization's communication process through various scenario analyses as well as predicting the dynamic behavior pattern of their key performance measures over a future time frame. For the demonstration purpose, this study applied the DBSC model to Prototype of Korea manufacturing and service firm.