• Journal of the Korean Society of Food Culture
• /
• v.21 no.5
• /
• pp.516-523
• /
• 2006

Four dietary fiber enriched menus for the aged were developed and physicochemical were analyzed. Major foods enriching the dietary fiber were as following; kimchi & bean sprouts soup and sweet potato for menu 1, chamcheunamul and grape for menu 2, mushroom and kimchi for menu 3, dried radish leaves and green pepper for menu 4. One portion of calorie, carbohydrate, protein and fats for the aged were calculated as 567 kcal, 92.8 g, 21.3 g and 12.6 g, respectively based on recommended daily allowances for adults. Dietary fiber content increased in the menus 1, 2, 3 and 4 were 17.27%, 20.84%, 16.91%, and 23.64%, respectively. The menu 1 had significantly the highest acceptance scores among the rice, soups, side dishes and overall desirability with the acceptance sores of 4.77, 4.58, 4.62 and 4.69, respectively(p<0.05). Female showed significantly the higher acceptance scores of all of the enriched fiber menu than those of male. Moisture contents of the boiled rice with barely in menu 3 had significantly the highest value of all(p<0.05) and the side dishes of all menus did not show any significant differences at p<0.05. The pH value of boiled rice with barely in menu 3 was significantly the highest and menu 1 of kimchi & bean sprouts soup had significantly the lowest pH values(p<0.05). Hunter L value was significantly the highest in boiled rice with barley. The dietary fiber enriched menus were successfully developed for application and standardization in the meal service planning for the aged as one of trials of basic data collection.

• Computers and Concrete
• /
• v.30 no.5
• /
• pp.301-310
• /
• 2022

Cement-based sensors have been widely used as structural health monitoring systems, however, their long-term sensing performance have not actively investigated. In this study, a deep learning-based methodology is adopted to predict the long-term piezoresistive properties of cement-based sensors. Samples with different multi-walled carbon nanotube contents (0.1, 0.3, and 0.5 wt.%) are fabricated, and piezoresistive tests are conducted over 10,000 loading cycles to obtain the training data. Time-dependent degradation is predicted using a modified long short-term memory (LSTM) model. The effects of different model variables including the amount of training data, number of epochs, and dropout ratio on the accuracy of predictions are analyzed. Finally, the effectiveness of the proposed approach is evaluated by comparing the predictions for long-term piezoresistive sensing performance with untrained experimental data. A sensitivity of 6% is experimentally examined in the sample containing 0.1 wt.% of MWCNTs, and predictions with accuracy up to 98% are found using the proposed LSTM model. Based on the experimental results, the proposed model is expected to be applied in the structural health monitoring systems to predict their long-term piezoresistice sensing performances during their service life.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.72-74
• /
• 2022

The National Science and Technology Knowledge Information Service (NTIS) provides information on national R&D projects. Project information consists of meta-information such as 'project name', 'project performance institution', 'research manager name', and text explaining projects such as 'research goal', 'research content', and 'expected effect'. There is a problem that it takes a lot of time to find the desired project information by checking all of the "research goals" or "research contents" in the list of results of searching for 1 million project information. To solve this problem, this paper proposes a project information summary system that summarizes the parts consisting of long texts within the national R&D project information. By analyzing the linguistic characteristics of the Korean language, a preprocessor was built and a project information summary model based on natural language processing technology was developed to process preprocessed text information. Through this, project information composed of long sentences is provided in a compressed and summarized form, which will help users to easily and quickly infer the overall content with the summary information alone.

• Educational Technology International
• /
• v.6 no.1
• /
• pp.41-63
• /
• 2005

E-Learning is widely introduced with cyber universities in Korea from 2001 whencyber universities were first authorized by the Ministry of Education and Human Resource Development. E-learning amplified by cyber university gave a big impact in the campus based university which became the cause for the educational paradigm shift. The changes of status of cyber university shows important trend in college education which was analyzed by enrollment rate, types of cyber university, demography, and study areas. The enrollment rate of cyber universities is ever since 2001 and variety of study areas gives popularity to students. The demography of students is as expected older than traditional students. Female students at the cyber university outnumbered that at campus based university in Korea. For analyzing the trend of e-learning in Korea, there were studies twice in 2001 May-June from 213 faculty members and staff, 630 students and in 2004 May-June with 401 students. Most of e-learning students tent to spend less time yet, students feel more burden with e-learning. Professors tend to load more materials for the e-learning in 2001but in 2004 study, the difference no longer exists. Professors and students feel the academic achievement through e-learning is not as good as from the traditional classes. Difficulties for e-learning in 2001 were the lack of administrative information but in 2004, boring contents and lack of instructional strategies for e-learning. Technical problems still do exist but less serious. Suggestions for e-learning are blended learning, online students prefer video streaming with their own lecturer, new definition of instructor is needed, professional development for content development and online instruction is needed, success story of online learning should be encouraged, guidance for online students needed. The cyber university experiencegave a positive impact on the traditional universities such as rethinking the roles of universities, the quality control of classes, professional development, student oriented educational service of e-learning pedagogy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.121-121
• /
• 2022

When 7 kg·10a^-1, which is less than the nitrogen standard application amount of 9 kg·10a^-1, is applied, the protein content is lowered and the palatibility is improved. In order to examine the applicability of nitrogen fertilization of 7 kg·10a^-1 nationwide, soil samples were collected from 240 paddy fields in 8 provinces in 2021, and the organic matter content, effective phosphoric acid, and effective silicic acid were analyzed for each sample. As a result of one-way ANOVA analysis between samples collected for each province, there was no significant difference in the content of organic matter, effective phosphoric acid, and effective silicic acid except for some provinces. The contents of organic matter was higher than the appropriate level(25 ~ 30 g·kg^-1) except for Gyeongsangbuk-do, the effective phosphoric acid was higher than the appropriate level(80~120 mg·kg^-1) in all provinces, and the effective silicic acid was lower than the appropriate level(157 ~ 180 mg·kg^-1) except for Gyeonggi-do, Jeollanam-do and Gyeongsangnam-do. As a result of analyzing the recommended fertilization amount based on the nitrogen application amount of 7 kg·10a^-1, 68.3% ofthe 240 samples were able to give nitrogen fertilizer less than 7.5 kg·10a^-1, and the rest had to be given more than that to satisfy the standard fertilization amount. As a result of this study, 68.3% of rice paddies nationwide can be cultivated with a standard fertilization amount of 7 kg·10a^-1, however it was thought that continuous nutrient management would be required for other paddies.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.447-454
• /
• 2023

Objective: This study aims to investigate the impact of changes in working conditions on job-related stress and musculoskeletal disorders using the results of seven surveys conducted at a single workplace from 2004 to 2022 regarding factors hazardous to the musculoskeletal system. Additionally, the study aims to propose alternative methods of investigating factors hazardous to the musculoskeletal system. Methods: A car parts manufacturing plant where the same survey was taken seven times from 2004 to 2022 was selected and the survey data was analyzed. The main contents of the survey were weekly working hours, Borg's scale, work intensity, job-related stress, and the prevalence of musculoskeletal symptoms. The statistical analysis was performed using SAS (version 9.4). Results: The results of this study are as follows. Firstly, changes in working conditions have an impact on job-related stress. Secondly, changes in working conditions have an impact on work intensity indicators. Thirdly, changes in working conditions have an impact on the prevalence of musculoskeletal symptoms. Fourthly, even with an increase in age and length of service, job-related stress and musculoskeletal symptoms were alleviated when working conditions were improved. Conclusions: In order for measures to reduce musculoskeletal disorders to be successful, working conditions must not deteriorate, and it is necessary to demand revisions to regulations, etc. to reflect these points in the investigation of hazardous factors to the musculoskeletal system.

• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.42-48
• /
• 2024

Purpose: The purpose of this study is to investigate the applications and prospects of big data in digital dental healthcare. Methods: The study included 30 participants in the dental field (dentists, technicians, professors, and graduate students). From June 25 to 30, 2023, the contents of the study were thoroughly explained, consent was obtained from the research subjects, and a questionnaire was administered via an internet service. The questionnaires of 28 participants who responded completely were used for analysis. The collected data were statistically processed using IBM SPSS Statistics ver. 22.0 (IBM). Results: The use of big data in digital dental healthcare, digital dental health system, mobile dental health, dental health analysis, and telehealthcare were all heavily surveyed, with an average score of 3.97 or higher on a 5-point Likert scale. The areas where big data can be utilized in digital dental healthcare are as follows. The utilization rate for three-dimensional digital product development via linkage with big data systems and industrial field manufacturing technology was found to be 4.11±0.67, and the analysis of trends by age in the occurrence of various oral diseases was found to be 4.00±0.98. Conclusion: In the future, research into the viability of big data's success in the medical data field, which is directly related to human life, is needed. Additionally, social policies and regulations regarding big data-related information and standards in dental healthcare are necessary.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.3
• /
• pp.229-242
• /
• 2024

Objectives: The purpose of this study was to explore and analyze experiences with home-visiting oral health education in vulnerable populations and to provide foundational data necessary for the development of preventive strategies for oral health promotion among these patients. Methods: Using a phenomenological research, in-depth interviews were conducted between August 29 and October 31, 2023 with 20 vulnerable individuals participating in the Home Visit Oral Health Education Program under the Gwangju+ Gwangsan Integrated Care Service project spearheaded by the Gwangju Medical Welfare Cooperative. Results: After analyzing the contents of the participants' experiences, 130 meaningful words and 14 subcategories were identified and categorized into five major themes. Participants expressed discomfort when chewing or swallowing food and felt burdened by visits to the dentist. Although they experienced considerable loneliness because they spent a significant amount of time alone, they enjoyed communicating through visitation care and expressed gratitude for receiving oral health education. Conclusions: Oral health education through home visits cam increase awareness of oral health management among vulnerable populations and serve as an important means of improving their quality of life.

• Information Systems Review
• /
• v.25 no.3
• /
• pp.121-138
• /
• 2023

The advancement in mobile technology brought disruptive innovation in media industry. The introduction of mobile devices broke spatial and temporal restrictions in media consumption. This study investigates the impact of mobile channel adoption on video viewing behavior, using real-world dataset obtained from a particular on-demand service provider in South Korea. We find that the adoption of a mobile channel significantly increases the total viewing time of video-on-demand via TV and the number of contents viewed. Our results suggest that the mobile channels act as a complement channel to conventional TV channels. We provide theoretical and practical insights on consumer usage in the emerging over-the-top market.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.10.1-10.10
• /
• 2023

The purpose of this paper was to review the problems relating to Korea's occupational health services and suggest ways to improve them. Korea can be classified as a welfare state type of conservative corporatism partially interwoven with liberalism. While experiencing compressed economic growth, the economic sectors of developed (excess areas) and developing (deficient areas) countries are interwoven. Therefore, it is necessary to perfect conservative corporatism along with a complementary reinforcement of liberal contents and to apply a multilayered approach focusing on complementing the deficient areas. It is essential to form a national representative indicator related to occupational health, and a strategy for selection and concentration is needed. The proposed central indicator is the occupational health coverage rate (OHCR), which is the number of workers who have applied for mandatory occupational health services under the Occupational Safety and Health Act in the numerator with the total working population in the denominator. This paper proposes ways to raise the OHCR, which is currently at the level of 25%-40%, to 70%-80%, which is the level of Japan, Germany, and France. To achieve this target, it is necessary to focus on small businesses and vulnerable workers. This is an area of market failure and requires the active input of community-oriented public resources. For access to larger workplaces, the marketability of services should be strengthened and personal intervention using digital health resources should be actively attempted. Taking a national perspective, work environment improvement committees with tripartite (labor, management, and government) participation for improvement of the working environment need to be established at the center and in the regions. Through this, prevention funds linked to industrial accident compensation and prevention could be used efficiently. A national chemical substance management system must be established to monitor the health of workers and the general public.