• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.415-420
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated king roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권6호
• /
• pp.359-367
• /
• 2004

The switched reluctance motor(SRM) has considerable potential for industrial applications because of its high result lily as a result of the absence of rotor windings. In some applications with SRM, paralleling strategy is often used for cost saving, increasing of current capacity and system reliability. A SRM inverter has very low ,switching frequency. This results in reducing the burden for a high-speed of the gate-amp interface circuit. and the linearity of optocoupler is used to protect the instantaneous peak current for the stable operation. In this paper, series resistor is used to equal the current sharing of each switching device and a linear gate-amp is proposed to protect the instantaneous peak current which occurs in transient state. The proposed paralleling strategy is verified by experimental results.

• 전력전자학회논문지
• /
• 제8권3호
• /
• pp.285-291
• /
• 2003

스위치드 릴럭턴스 전동기는 고출력, 고효율 및 직권전동기 구동특성 등으로 견인구동용으로 주목받고 있다. 그러나 전동기를 4상한 구동하기 위한 발전영역에서 제어는 쉽지 않다. 본 논문은 전류제한법에 의해 안정된 발전제동이 가능한 제어방식을 제안하였다. 전동기 구동시는 기준전류제한방식과 위상각 제어방식으로 속도제어를 행하고, 발전제동모드에서는 상전류가 발산하지 않는 조건을 산정하여서 이 값을 기준전류로 한 전류제한방식을 채택하였다. 시뮬레이션과 실험에 의해 제안한 방식의 타당성을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.152-160
• /
• 2004

A novel UPQC(Unified Power Quality Conditioner), which consists of series inverter, shunt inverter, distributed generation system, is proposed. The proposing system can compensate reactive power, harmonics, voltage sag and swell, voltage interruption etc. through the change of paralleling operation mode and islanding operation mode. The control strategy for the proposing system was derived using the instantaneous power method. The performance of proposing system was analyzed by means of the PSCAD/EMTDC simulation and the experimental work with the hardware prototype. The proposing system has the ultimate capability of improving power quality at the point of installation on power distribution systems or Industrial power systems and can be utilized for the custom power device in th future distribution system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.129-131
• /
• 2006

This paper presents a new ZVS-PWM high frequency inverter. The ZVS operation is achieved in the whole load range by using a simple auxiliary reverse blocking switch in parallel with series resonant capacitor. The operating principle and the operating characteristics of the new high frequency circuit treated here are illustrated and evaluated on the basis of simulation results. It was examined that the complete soft switching operation can be achieved even for low power setting ranges by introducing the high frequency dual duty cycle control scheme. In the proposed high frequency inverter treated here, the dual mode pulse modulation control strategy of the asymmetrical PWM in the higher power setting ranges and the lower power setting ones, the output power of this high frequency inverter could introduce in order to extend soft switching operation ranges. Dual duty cycle is used to provide a wide range of output power regulation that is important in many high frequency inverter applications. It is more suitable for induction heating applications the operation and control principle of the proposed high frequency inverter are described and verified through simulated results.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.231-239
• /
• 1999

변압기로써 결합된 직렬공진 부하를 가진 전압원-인버터(Voltage-Source Inverter)가 공진주파수로 작동되는 경우에 출력 전류를 제어하는 기법으로서, 개선된 전류조절형 델타변조(Current-Regulated Delta Modulator; CRDM)방식을 제안한다. 일반적인 CRDM은, 전류편차가 상당한 크기로 나타난다는 문제가 있으며, 특히 유도가열장치와 같이 부하가 변압기를 통하여 연결되는 경우에는 변압기의 자속포화 문제가 발생하므로 실제 사용에 한계가 있다. 이러한 문제를 해결하기 위하여, 자속포화 현상을 분석하고 이를 방지하기 위한 간단한 방법을 제안하며, 전류편차를 제거하기 위한 적분형 CRDM을 적용한다. 그리고 슬라이딩 모드 제어의 개념을 이용하여, 안정된 동작을 보장하는 적분기 이득의 상한치를 회로특성치로부터 구하는 방법을 제안하고, 제안된 기법의 효용성을 시뮬레이션과 실험으로써 확인한다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.56-69
• /
• 2018

In this paper, an improved Space Vector Modulation (SVM) based fault tolerant operation on a nine-level Cascaded H-Bridge (CHB) inverter with an additional backup circuit is proposed. Any type of fault in a power converter may result in a power interruption and productivity loss. Three different faults on H-bridge modules in all three phases based on the SVM approach are investigated with diagrams. Any fault in an inverter phase creates an unbalanced output voltage, which can lead to instability in the system. An additional auxiliary unit is connected in series to the three phase cascaded H-bridge circuit. With the help of this and the redundant switching states in SVM, the CHB inverter produces a balanced output with low harmonic distortion. This ensures high DC bus utilization under numerous fault conditions in three phases, which improves the system reliability. Simulation results are presented on three phase nine-level inverter with the automatic fault detection algorithm in the MATLAB/SIMULINK software tool, and experimental results are presented with DSP on five-level inverter to validate the practicality of the proposed SVM fault tolerance strategy on a CHB inverter with an auxiliary circuit.

• Journal of Korean Neurosurgical Society
• /
• 제37권1호
• /
• pp.25-28
• /
• 2005

Objective: Giant invasive pituitary adenoma looks histologically benign, but these tumors have an aggressive clinical course. The authors review 10 cases and discuss the results obtained and the strategy to use for the management of giant invasive pituitary adenoma. Methods: Out of a series of 155 pituitary adenomas treated surgically between 1994 and 2002, ten patients with giant invasive pituitary adenoma were selected and their clinical problems, radiologic findings, extent and invasiveness, hormonal and histologic findings and surgical results were analyzed retrospectively. Results: There were 4 male and 6 female patients, with an average age of 47 years and an average follow-up period of 42 months. The average size of tumor was 50.7mm. These tumors revealed severe invasions into surrounding structures. 8 patients underwent transsphenoidal approach(TSA) operations, 1 patient with transcranial operation and 1 patient with combined TSA and transcranial operation. In all cases, subtotal resection was performed. The histologic findings were 2 prolactinomas and 3 hormonal non-function adenomas. The therapies administered after surgical removal consisted of conventional fractionated radiotherapy (2 patients), treatment with dopamine agonists to control hyperprolactinemia (2 patients), and treatment with hormone replacement (2 patients). Conclusion: Giant invasive pituitary adenomas are characterized by different forms of expansion and invasiveness and variable clinical problems. Because of their aggressive expansion and invasiveness, there are many different strategies which can be considered for their management. The authors obtain good results by choosing conservative surgical removal and multidisciplinary treatments with serial radiological and hormonal follow-up.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.69-71
• /
• 2003

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.301-304
• /
• 2008

This paper presents a lossless inductor snubber-assisted series resonant high frequency inverter using the trench gate IGBTs for the electromagnetic induction eddy current-heated fixing roller in copy and printing machines in a new generation. This soft switching high-frequency inverter can completely achieve zero current soft switching (ZCS) commutation mode transitions and wide power regulation under its constant frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally presented for a constant frequency PDM strategy under a ZCS operation, together with its output power regulation characteristics-based on the pulse density modulation. The effectiveness of this soft switching high-frequency inverter is confirmed for the fixing equipment with the induction-heated fixing roller.