• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.351-352
• /
• 2015

Thyristor-controlled series capacitor (TCSC) is a power electronic-based device that provides a fast and controllable series compensation of transmission line reactance. To match with laboratory facilities and for further research initiatives, a practical laboratory scale TCSC was designed and fabricated in this paper. The TCSC parameters were designed based on the terminologies such as percentage of compensation, boost factor and resonance factor. According to the design parameters, a prototype laboratory scale TCSC with a constant reactance controller was fabricated and tested. The measured results from the laboratory scale TCSC demonstrate the ability of the TCSC to provide rapid control of series reactance of a transmission line.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.8
• /
• pp.423-429
• /
• 2006

Recently, the high frequency isolated boost DC/DC converter has been widely used for the PCS (Power Conditioning System) system because of its small size and low cost. However, the high frequency isolated boost DC/DC converters applied the conventional voltage-fed converter and current-fed converter have the problems such as the high conduction losses and the surge voltage due to the high circulating current and the leakage inductance, respectively. To overcome this problems, in this paper the secondary LLC resonant converter is proposed, and the experimental results of the secondary LLC series resonant converter for boost DC/DC converter are verified on the simulation based on the theoretical analysis and the 700W experimental prototype.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.305-307
• /
• 2001

This paper deals with single-phase unified power quality conditioner(UPQC), which aims at the integration of series-active and shunt-active filter. The series filter is used to compensate for the voltage distortions and the shunt filter is used to provide reactive power and counteract the harmonic current injected by the load. Also, the voltage of the DC link capacitor is controlled to a desired value by the shunt active filter. The performance of UPQC under load nonlinearities conditions is investigated using simulation as well as experimental results.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.188-189
• /
• 2017

There has been a growing demand for power semiconductor switches equipped with high-voltage blocking capability of kV range and fast-switching characteristics of ns range in various plasma application. This paper investigates the application of SiC MOSFETs in the particular plasma application which requires the blocking voltage of 4.5kV and the switching transient time of less than 100ns. In order to meet the required blocking voltage, the series connection of multiple SiC MOSFETs is adopted in this paper. Also, snubber capacitors are employed to equalize the voltage sharing among the series connected SiC MOSFETs. The simulation and experimental result successfully verifies the application of SiC MOSFETs and snubber capacitors in the plasma application requiring high-voltage and fast-switching load dynamics.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.9-11
• /
• 1994

FACTS concept is the control of power flow and increase of the loading on existing lines to the thermal limuts. This paper focuses on the ability of the thyristor controlled series compensator (TCSC) to stabilize the disturbed power systems. The result shows the potential benefit of the TCSC in addition to the role of controlling the steady state power flow. In order to show the effectiveness of controlled series capacitor, power system dynamic model is augmented and the effect of the SC into the power system dynamics is included. As a control algorithm, Linear Optimal Control theory is applied.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.4
• /
• pp.249-255
• /
• 2021

A novel current balancing technique for multichannel light-emitting diode (LED) that uses a series resonance and coupled inductor is proposed in this paper. The proposed LED driver balances output currents through frequency control and enables zero-voltage switching. The proposed converter utilizes the charge balance condition of the resonant capacitor and the current sharing function of the coupled inductor to achieve whole LED current balancing without an additional controller. The proposed coupled inductor can integrate the current balancing function and the resonant inductor, so the power density can be increased by reducing the number of magnetic devices. A 40 W prototype is built to verify the validity of this LED driver, and the experimental results are successfully obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.384-393
• /
• 2013

In this paper, a design of planar microwave bias-tee using lumped elements was presented. The bias-tee is composed of 2 blocks; DC block and RF choke. For this design of the bias-tee, a wideband capacitor was used for DC block. For a RF choke, a series connection of inductors which have different SRFs is used for a RF choke. In the RF choke, a series connection of resistor and capacitor was added in shunt to eliminate a loss from a series resonance. The designed bias-tee was implemented by using 1608 SMT chip components. The fabricated bias-tee was measured using Anritsu 3680K fixture which enables to remove an effect of a connector. The fabricated bias-tee presented -15 dB of return loss and -1.5 dB insertion loss at 10 MHz~18 GHz.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.41-46
• /
• 2019

The application of series compensator in a power system affects other devices such as circuit breakers transient recovery voltage (TRV) problem. In this paper, we analyze the TRV effect on a line circuit breaker in the cases with and without thyristor-controlled series capacitor (TCSC) via simulation, and suggest an effective method to overcome the increase of TRV due to the TCSC installation. It also discusses the impact of proposed protection on metal oxide varistor (MOV). A 345 kV transmission line in Korea was selected as a study case. Grid system was modelled using PSCAD (Power Systems Computer Aided Design) / EMTDC(Electro Magnetic Transient Direct Current). The TRV was analyzed by implementing a short circuit fault along the transmission line and at the breaker terminal. The proposed protection scheme, the TRV satisfies the standard. However, the MOV energy capacity increased as the delay time increased. This result can solve the TRV problem caused by the expected transmission line fault in a practical power system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.92-98
• /
• 2012

As the increasing of non-linear load, filter is coming to be high gradually in order to reduce the harmonic which occurs from the power conversion. The maintenance of passive filter is easier than active filter and it has been widely used in the industrial site. This passive filter is connected with condenser and reactor by series and parallel and it is installed at the front of nonlinear load. The breakdown of passive filter occurs frequently at the reactor side rather than capacitor. So the breakdown cause close examination is necessary. In this paper, we analyzed that the electric stress of reactor which is considered magnetization saturation at the passive filter. We confirm that the reduction of harmonics and the electric stress of reactor is influenced by the linear and non-linear element of reactor.