• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.71-72
• /
• 2010

This paper deals with the SCR thyristor switching characteristics of a 3-phase voltage disturbance generator. The series transformers of the generator require bypass SCR thyristors to provide the source voltage to the output terminal in normal operating mode. The SCR thyristor switching characteristics is quite different according to the connection point to the series transformer. The switching characteristics is analysed and verified through simulation results.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.532-533
• /
• 2010

This paper deals with the SCR thyristor switching characteristics of a 3-phase voltage disturbance generator. The series transformers of the generator require bypass SCR thyristors to provide the source voltage to the output terminal in normal operating mode. The SCR thyristor switching characteristics is quite different according to the connection point to the series transformer. The switching characteristics is analysed and verified through simulation results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.88-93
• /
• 2016

Soft starters are used with large induction motors in blowers, fans, pumps and the crane hoist drives. AC voltage controllers are used as soft starters in induction motors for starting and to adjust its speed. Soft-starter starting system uses phase control method of input electric source through the setting of the thyristor(SCR) firing angle ${\alpha}$, and it can control input electric source stably and continuously from beginning of starting to ending of starting. In this paper, it is verified that power stack of high-voltage with SCR series system possesses dielectric strength and input electric source is controlled stably by phase control. Especially, from the driving experimental of proposed soft-starter operating, a smoothing acceleration and inrush current decrease can be achieved by the series SCR trigger.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.3
• /
• pp.18-24
• /
• 1977

In this paper, a series inverter circuit is constructed by using the pinch-off characteristics of FET, and itsoutput characteristics is analysed for the variation of gate bias frequency and load. The above constructed circuit could eliminate the unstable output characteristics of SCR-series inverter fir chit by the changes of gate bias frequency and load resistor. But the current capacity of the FET-series inverter circuit is relatively small, and is recommended to be used for light loads.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.338-341
• /
• 2019

In this paper, we propose a novel ESD device with improved characteristics of LVTSCR, which is a representative ESD protection device, and verify the N-stack technology for design optimized for each required voltage of a specific application. The characteristics of the holding voltage and the trigger voltage, which are the main parameters, are examined and the temperature characteristic, which is an indicator of the tolerance characteristic, is also verified. well region and a parasitic NPN to form a series-connected structure. We used synopsys' T-cad simulation tool for characterization.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.98-104
• /
• 2011

The introduction of a diesel engine into the passenger car and light duty applications in the United States involves significant technical challenges for the automotive makers. This paper describes the SCR System optimization procedure for such a diesel engine application to meet Tier2 Bin5 emission regulation. A urea SCR system, a representative $NO_x$ reduction after-treatment technique, is applied to a 3.0 liter diesel engine. To achieve the maximum $NO_x$ reduction performance, the exhaust system layout was optimized using series of the computational fluid dynamics and the urea distribution uniformity test. Furthermore a comprehensive simulation model for the key factors influencing $NO_x$ reduction performance was developed and embedded in the Simulink/Matlab environment. This model was then applied to the urea SCR system and played a key role to shorten the time needed for SCR control parameter calibration. The potential of a urea SCR system for reducing diesel $NO_x$ emission is shown for FTP75 and US06 emission standard test cycle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.68-76
• /
• 2008

Diesel $NO_x$ reduction by $NH_3$-SCR in conjunction with the effective oxidation precatalyst was analytically investigated. Physicochemical processes in regard to $NH_3$-SCR $NO_x$ reduction and catalytic NO-$NO_2$ conversion are formulated with detailed descriptions on the commanding reactions. A unified model is correctly validated with experimental data in terms of extents of $NO_x$ reduction by SCR and NO-$NO_2$ conversion by DOC. The present deterministic model based on the rate expressions of Langmuir-Hinshelwood reaction scheme finds a conversion extent directly. A series of numerical experiments concomitant with parametric analysis of the $NO_x$ reduction was conducted. $NO_x$ reduction is promoted in proportion to DOC volume ar lower temperatures and an opposite holds at lower space velocity and intermediate temperatures. $NO_x$ conversion is weakly correlated to the space velocity and the DOC volume at higher exhaust temperature. In DOC-SCR system, the $NO_x$ reduction efficiency depends on the $NH_3/NO_x$ ratio.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1027-1032
• /
• 1996

The auto-illumination controller for office, residence, and so on was studied. The system consists of parts of a power supply, a signal oscillator, a lamp controller and two kinds of sensor. The lamp controller has two thyristors triggered by the IR sensor(SCRI) and CdS sensor(SCR2) respectively, When the illuminance around this system is higher than operating value of its sensor, lamp is turned off automatically. Otherwise, the light of lamp gets dim by CdS sensor. In case IR sensor senses the body heat of people around itself, the illuminance of the lamp gets maximum. The illuminance of the lamp can be changed dimmly by control of the variable resistor (RV) connected with SCR2 in series. The turning - on time of the lamp can be also controlled using a variable resistor(Rt) connected with a signal oscillator in parallel. Changing resistance Rt changes the time constant(.tau.), which triggers the gate of SCR2. Though people left the surrounding of lamp, the lamp keeps light for a while.

• 전기의세계
• /
• v.26 no.3
• /
• pp.76-83
• /
• 1977

The choice of control method and circuit must be decided after a broad inspection with the characteristics of load and control elements as well as that of electric and mechanical nature. In the present study, Pulse width modulated(PWM) SCR chopper was chosen and for the electric commutation, Jones' forced method was taken bacause of its having enough reverse bias energy. Objectives of experimentation by this system are; 1) the condition of SCR as a gate trigger pulse. 2) the observation of phenomena at the time of forced commutation 3) the experimentation on characteristics of speed control by PWM chopper. Above experimentation shows good characteristics, however, in the limit of narrow gap between the ON and OFF pulses, a complete control was not possible. So, that must be the point to be studied further alone with the harmonics influence.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.64-72
• /
• 2017

A series of Pt-based ${\gamma}-Al_2O_3$ catalysts promoted with several alkali and alkaline earth metals were prepared by a wet impregnation method. We confirmed that the addition of Na to $Pt/{\gamma}-Al_2O_3$ could cause a change in the oxidation state of Pt through an electronegative gap between Pt and Na atom, and increase the ratio of the metallic Pt. The metallic Pt species made by adding an optimum Na content improved the adsorption of NO species on the catalyst surface and restrained the oxidation of $CH_4$ to $CO_2$. When molar ratio of Na/Pt was 4.0, the highest catalytic activity could be obtained.