• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1188-1193
• /
• 2004

So far, there have been grossly 3 types of studies on GF(2m) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. Serial multiplication method was first suggested by Mastrovito (1), to be known as the basic CF(2m) multiplication architecture, and this method was adopted in the array multiplier (2), consuming m times as much resource in parallel to extract m times of speed. In 1999, Paar studied further to get the benefit of both architecture, presenting the hybrid multiplication architecture (3). However, the hybrid architecture has defect that only complex ordo. of finite field should be used. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software. The implemented GF(2m) multiplier shows t times as fast as the traditional one, if we modularized the numerical expression by t number of parts.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.193-204
• /
• 2017

Various 3D-stacked DRAMs have been proposed to overcome the memory wall problem. Hybrid Memory Cube (HMC) is a true 3D-stacked DRAM with stacked DRAM layers on top of a logic layer. The logic die is mainly used to implement a memory controller for HMC, and it is connected through a high speed serial link called SerDes with a host that is either a processor or another HMC. In HMC, the serial link is crucial for both performance and power consumption. Therefore, it is important that the link is configured properly so that the required performance should be satisfied while the power consumption is minimized. In this paper, we propose a HMC system model included the high speed serial link to estimate performance accurately. Since the link modeling strictly follows the link flow control mechanism defined in the HMC spec, the actual HMC performance can be estimated accurately with respect to each link configuration. Various simulations are conducted in order to deduce the correlation between the HMC performance and the link configuration with regard to memory utilization. It is confirmed that there is a strong correlation between the achievable maximum performance of HMC and the link configuration in terms of both bandwidth and latency. Therefore, it is possible to find the best link configuration when the required HMC performance is known in advance, and finding the best configuration will lead to significant power saving while the performance requirement is satisfied.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.855-865
• /
• 1991

A simple method for analysis of serial search burst-format direct-sequence spread-spectrum (DS-SS) code acquisition system had been recently proposed, and therein, the effect of the code autocorrelation sidelobes on the performance of DS-SS code acquisition system has been assessed [4],[5]. In this paper, a new hybrid scheme which combines the serial search with maximum likelihood search is proposed to eliminate the deleterious effect of code autocorrelation sidelobes, and the performance is analyzed for the additive withe Gaussian noise (AWGN) channels. To analyze the performance of this system, we have generalized the method used in [4],[5] to arbitrary burst-format DS-SS acquisition schemes. The results show that a new hybrid scheme has good immunity against the effect of code autocorrelation sidelobes. Thevalidity of the presented approach has been confirmed form the results of simulation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.725-731
• /
• 2004

In this study, the three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', 'parallel/exchanged type', and 'parallel/separated type' respectively in this work) were designed and manufactured. This paper presents the tested results of the thermal recovery characteristics on the interrupters using a simplified synthetic test facility. The 'serial type' hybrid interrupter which is to obtain more easily the pressure rise for the thermal recovery compared with the others has the best capability in the thermal recovery characteristics. In order to investigate the stress on the operating mechanism, the distortion of the stroke wave in on-load test was examined to the stroke curve in no-load test. The biggest distortion was occurred in the 'parallel/exchanged type' hybrid interrupter. Finally, the small interruption capability on the three type interrupters was estimated by a theoretical form and the 'parallel/separated type' hybrid interrupter has the advantage of the others in the view of structure.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.778-783
• /
• 2012

Due to the increase of oil price, the needs of the reduction of the fuel cost is rising. Therefore, necessity of hybrid vehicle that runs with engine and the electric motor is on the rise. In order to improve the performance of hybrid vehicle, many researches is carried out. Hybrid vehicles have been developed with the various layout such as serial type, parallel type, power split type, and multi-mode type. The multi-mode hybrid vehicles are designed to show the efficient driving characteristics at low speed and high speed. But the multi-mode system have the problem such as frequent clutch engagement. Frequent clutch engagement causes the shock of vehicles, and the shock inhibits the ride comfort. In this study, automation mechanism of clutch operation is proposed to mitigate the shock at engaging clutch. For this purpose, the dynamic characteristics of motor control is numerically analyzed by using Matlab/Simulink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.406-411
• /
• 2000

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1862-1867
• /
• 1999

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.114-124
• /
• 2007

Contemporary fashion design has been represented as intermedia transcended value and spatiotemporal notion and also had a tendency to concentrate on serial process that materials are transfigured through time rather than existence. These forms related to interaction with time, space and performance as well as compositive genres, hybrid culture, compound gender define as 'serial expression' in this study. The serial expression ran be characterized that system, process, series, enumeration of sequences, depiction of performance, repetition of action in fashion collections and exhibitions of designers. The concept and circumstances made by author as a creator of fashion broaden perceptions of audiences and arouse spectators to participate in the situation as needing immediate attention. The forms of fashion and Conceptual Art in serial expression are analogous and even identical situations represent in fashion collection. Therefore analysis serial forms of art derives formative features: Narrative process, Imitation and Appropriation, Virtual reality and High technology, Hybridism and Convergence. This study suggest a framework to analyze conceptual fashion that give salience to megatrend in contemporary fashion culture on artistic point of view.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.67-75
• /
• 2013

In this paper, parallel input/serial output dual converter is designed appropriately for fuel cell hybrid power system. In case of proposed converter, zero voltage switching condition is designed without additional resonance device using leakage inductance of transformer and output capacitance of switch, and zero voltage switching method is used. Also, the system method is for increasing power by connecting half-bridge in parallel and increasing output voltage by connecting secondary output of transformer in serial. Through this method we can increase power and decrease volume of system. So in this paper, dual converter is designed. 1.5kW fuel cell hybrid power system was implemented, and system operation and stability was verified through experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.115-126
• /
• 1999

A two-dimensional Navier-Stokes solver using hybrid meshes is parallelized with a domain decompostion method. The focus of this paper is placed on minimizing the amount of effort in parallelizing the serial version of the solver, and this is achieved by adding an additional layer of cells to each decomposed domain. Most subroutines of the serial solver are used without modification, and the information exchange between neighboring domains is achieved using MPI(Message Passing Interface) library. Load balancing among the processors and scheduling of the message passing are implemented to reduce the overhead of parallelization, and the speed-up achieved by parallelization is measured on the transonic invisicd and turbulent flow problems. The parallelization efficiencies of the explicit Runge-Kutta scheme and the implicit point-SGS scheme are compared and the effects of various factors on the results are also studied.