• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.87-90
• /
• 2006

Nowadays, we can enjoy access to high speed network and advanced services of convergence between broadcasting and communication anywhere and anytime through a ubiquitous computing. So, now digital convergence devices come out constantly. These devices are required faster network environment for high speed data processing than before. In this paper, we describe the design of InfiniBnad network adapter, which is included two FPGA chipsets. When this adapter is installed to Digital Convergence Platform (DCP) network performance will be improved. The adapter includes 12channel serial ports for external communication and internally, uses PCI-Express bus. We have finished the test of high speed serial based network adapter through composing complete InfiniBand network and applied fabric management software. So, we have verified that it can be applied on DCP environment.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.635-638
• /
• 2002

In this paper, the connection device of RS232C and TCP/IP implementation using ARM processor and LINUX is proposed. Data interaction flash memory the multiple serial ports are transferred to ARM processor and the data are processed and formed into data packet for transfer via internet protocol. Packet flash memory Internet is decoded to extract the serial port data. The serial ports supports RS232C asynchronous protocol communication and control program is developed in GNU-C and installed in the on-board memory for packet conversion and control. The research result can be applied to terminal server, printer server and multiple serial ports equipments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.776-783
• /
• 2009

Current-cut circuit is an effective method to obtain low power consumption in wireless communication systems as high speed OFDM. For the operation of current-mode FFT LSI with analog signal processing essentially requires current-mode serial-to-parallel/parallel-to-serial converter with multi input and output structure. However, the Hold-mode operation of current-mode serial-to-parallel/parallel-to-serial converter has unnecessary power consumption. We propose a novel current-mode serial-to-parallel/parallel-to-serial converter with current-cut circuit and full chip simulation results agree with experimental data of low power consumption. The proposed current-mode serial-to-parallel/parallel-to-serial converter promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.671-676
• /
• 2010

In this paper, an effort has been made to design and develop a meteorological data logger for meteorological purpose. This data logger is proposed to be included various sensor interface that used in weather sensors. Besides, numbers of meteorological process libraries are added into this data logger to make it able to perform as unattended weather monitoring system. Data output of this data logger are also design to support multiple protocol that commonly used in data logger, and several communication devices that commonly used in the market. Each data that logged will be logged together with date and time and able to retrieve via serial port using hyper terminal. It is also configurable via serial port.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.251-255
• /
• 2015

In this paper, we propose a fuse controller which is used for storing the optimal value or the correction value for the surrounding product of the IoT applications and it is implemented serial communication circuit using a single pin. Because of the proposed single pin protocol is simpler in the hardware than the conventional $I^2C$ and SPI using two or more pins, it is suitable for the area of small amount of data transmission. The function of the one pin protocol is verified by logic simulation and the FPGA test board and it is fabricated using CMOS 0.35um technology. It is expected to use the IoT product that require the low power consumption and simple hardware.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.148-151
• /
• 2005

This paper proposes a high speed interface using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit that serial binary data are received and converted into parallel redundant multi-valued data, and decoding circuit that convert redundant multi-valued data to parallel binary data. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 demultiplexer (DEMUX, serial-parallel converter) IC was designed using a 0.35${\mu}m$ standard CMOS Process. Proposed demultiplexer is achieved an operating speed of 3Gb/s with a supply voltage of 3.3V and with power consumption of 48mW. Designed circuit is limited by maximum operating frequency of process. Therefore, this circuit is to achieve CMOS communication ICs with an operating speed greater than 3Gb/s in submicron process of high of operating frequency.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2971-2973
• /
• 2000

In this paper, we proposed the implementation of multiple access serial communications with improved transmission control. For serial communications. RS232 protocol is used and the transmitting data and is merged to form data channel. Multiple host access is configures by using the common data channel and ground channel. 8bit data transfer with variable frame size is transferred by using the 16bit host ID. Packet is composed of HEADER, receiver ID. variable length data frame, TAIL and CRC informations. Multiple hosts are allowed to transfer packet with the other hosts through the common communication channel. Byte-stuffing is used to differentiate the transfer rate of PC is performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1152-1156
• /
• 2003

For pneumatic valve system control, we need a serial data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic valve system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid control valves. in addition, we developed a communication protocol for construction of rs-485 based multi-drop network and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. the field test results show that, even under high noise environment, the data transmission of 375kbps rate is possible up to 1,500meter without using repeater. In addition, the system developed in this research is easily to be extended for a communication network because of its modular structure.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2553-2555
• /
• 2002

In this paper, we designed the monitoring system by one personal computer which supervise multiple data of multiple system based on the serial communication. This multiple data of multiple system has the merit of the effective data acquisition.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.663-665
• /
• 1998

The measuring data acquisition methods from local sensor are many kinds of techniques. But, if sampling time is not important and we need data of many sensors it is more resonable to be applied economical system. In this paper, the data acquisition technique is used two RS232C communication signals simultaneously. The one come from computer serial port, and another is signal changed from parallel port. In this case the circuits would be simplification and that communication cable is connected by Parallel instead of Branch connection.