• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.771-776
• /
• 2014

In this paper, an agile programmable chirp spread spectrum generator for wideband frequency-jamming applications from 20 MHz to 3 GHz is proposed. A frequency-mixing architecture using two voltage-controlled oscillators is used to achieve a wideband operating frequency range, and the direct digital synthesizer (DDS)-based chirping method with a two-point modulation technique is employed to provide a programmable and consistent chirp bandwidth. The proposed signal generator provides the various programmable FM signals from 20 MHz to 3 GHz with a modulation bandwidth from 0 to 400 MHz. The prototype successfully demonstrates arbitrary sequential jamming operation with a fast band-to-band hopping time of < 10 ${\mu}sec$.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.217-227
• /
• 2020

Purpose - Against the backdrop of the recent intense political conflict in Korea's political circles, it is to reveal from an economic point of view the hidden aspects behind the hostile conflict between the two political forces. Design/methodology/approach - This paper is not a normative study to find a solution to political conflict, but a positive study to reveal the mechanism of reciprocity that exists between the two parties of conflict in real politics. Therefore, the analysis is based on game theory methodology. Findings - It is shown that the ruling party should choose a level of preemptive response that is neither insufficient nor excessive if it aims to avoid radical anti-government struggles by opposition parties. We also find that even if the chances of success of the opposition's radical offensive struggle are low, the use of that strategy is not necessarily reduced. In addition, we have obtained comparative static results that do not deviate much from our intuition. What's interesting is that unlike our intuition that the choice of the method will be indifferent if the marginal effects of radical and normal methods of struggle are the same, the opposition party rather chooses the normal method of struggle more often. Research implications or Originality - In forming the analytical model, it reflected the support of the general public following the opposition's struggle against the ruling party in order to capture real politics well in the conflict between the two opposing parties.

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1346-1353
• /
• 1996

본 논문은 상위레벨에서 VHDL을 사용하여 순차회로의 주요 구성요소인 플립플롭을 모델링하는 방법과 고장을 검출하기 위한 테스트생성 알고리즘을 제안 한다. RS, JK, D, T플립플롭은 데이터 흐름형을 이용하여 모델링한다. 칩레벨 모델의 기본 구조인 마이크로 오퍼레이션 시이퀸스를 하나 이상의 다른 마이크로 오퍼레이션 사이퀸스에 연결된 제어점으로 나타낸다. 다른 마이크로 오퍼레이션을 제한하고 있는 마이크로 오퍼레이션고 장(FMOP고장)을 효과적으로 나타내기 위하여 고울트리의 개념을 사용하며 고울을 처리하기 위해서 휴리스틱 조건을 이용한다. FMOP나 제어점 고장(FCON)이 발생 할때 고장 활성화, 경로 활성화 및 활성화된 경로를 유지하기 위한 명료화과정을 거쳐 테스트 패턴을 생성 제안한 알고리즘을 C 언어로 실현하고 예제를 통하여 유효성을 확인 한다.

• 한국전산구조공학회논문집
• /
• 제16권4호
• /
• pp.431-437
• /
• 2003

본 연구에서는 순차 설계영역 (SDD： sequential Design Domain) 개념을 사용한 GUI(Graphic User Interface)환경 프로그램을 개발하였다. 본 프로그램은 상용프로그램인 ANSYS와 최적설계 프로그램인 PLBA(Pshenichny-Lim-Belegundu-Arora)를 연결하고 비주얼 베이직을 이용하여 GUI환경에서 사용자가 초기값과 입력파일을 작성하고 결과를 확인할 수 있도록 하였다. 프로그램의 신뢰도를 검증하기 위해서 3부재 및 5부재 트러스 구조물을 수치예제로 선정하여 해석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.542-547
• /
• 2001

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera can be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration in each region after the dye infusion reflects the large scale mixing while the followed slow decay reveals the small scale mixing. The temporal change of concentration probability functions conjectures the two sequential processes in the batch type mixing. An inactive column of water existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1145-1152
• /
• 2002

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields was obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera could be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter. height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration after the dye infusion reflects the large scale turbulent mixing while the fellowed slow decay reveals the small scale molecular mixing. The temporal change of concentration variance field conjectures the two sequential processes for the batch type mixing. An inactive column of water is existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.523-535
• /
• 2019

Purpose: We research on the efficient response surface methodology(RSM) design to develop a design space in Quality by Design(QbD). We propose practical designs for the successful construction of the design space in QbD by allowing different number of replicates at the box points, star points, and the center point in the rotatable central composite design(CCD). Methods: The fraction of design space(FDS) plot is used to compare designs efficiency. The FDS plot shows the fraction of the design space over which the relative standard error of predicted mean response lies below a given value. We search for practical designs whose minimal half-width of the tolerance interval per a standard deviation is less than 4.5 at 0.8 fraction of the design space. Results: The practical designs for the number of factors between two and five are listed. One of the designs in the list could be chosen depending on the experimental budget restriction. Conclusion: The designs with box points replications are more efficient than those with the star points replication. The sequential method to establish a design space is illustrated with the simulated data based on the two examples in RSM.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.663-671
• /
• 2007

In this work, shape optimization of a wire-wrapped fuel assembly in a liquid metal reactor has been carried out by combining a three-dimensional Reynolds-averaged Navier-Stokes analysis with the radial basis neural network method, a well known surrogate modeling technique for optimization. Sequential Quadratic Programming is used to search the optimal point from the constructed surrogate. Two geometric design variables are selected for the optimization and design space is sampled using Latin Hypercube Sampling. The optimization problem has been defined as a maximization of the objective function, which is as a linear combination of heat transfer and friction loss related terms with a weighing factor. The objective function value is more sensitive to the ratio of the wire spacer diameter to the fuel rod diameter than to the ratio of the wire wrap pitch to the fuel rod diameter. The optimal values of the design variables are obtained by varying the weighting factor.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.769-772
• /
• 2005

Five DOF motion errors of a hydrostatic bearing table driven by the coreless type linear motor were compensated utilizing the active controlled capillaries in this study. Horizontal linear motion and yaw error were simultaneously compensated using two active controlled capillaries and vertical linear motion, pitch and yaw error were also simultaneously compensated using three active controlled capillaries. By the compensation, horizontal linear motion accuracy and yaw were improved from 0.16 ${\mu}m$ and 1.96 arcsec to 0.02 ${\mu}m$ and 0.03 arcsec. Vertical linear motion accuracy, pitch and roll were also largely improved from 0.18 ${\mu}m$, 2.26 arcsec and 0.14 arcsec upto 0.03 ${\mu}m$, 0.07 arcsec and 0.02 arcsec. The compensated motion errors were within the range of measuring repeatability which was ${\pm}0.02\;{\mu}m$ in the linear motion and ${\pm}0.05$ arcsec in the angular motion. From these results, it is found that the motion error compensation method utilizing the active controlled capillaries are very effective to improve the five motion accuracies of the hydrostatic bearing tables.