• Structural Engineering and Mechanics
• /
• v.16 no.4
• /
• pp.441-468
• /
• 2003

This paper investigates the structural behavior of modular falsework system under sequential pattern loads. Based on the studies of 25 construction sites, the pattern load sequence modeling is defined as models R (rectangle), L and U. The study focuses on the system critical loads, regions of largest reaction forces, discrepancy between the pattern load and the uniform load, and the warning-system plan. The analysis results show that the critical loads of modular falsework systems with sequential pattern loads are very close to those with the uniform load used in design. The regions of largest reaction forces are smaller than those calculated by the uniform load. However, the regions of largest reaction forces of three models under sequential pattern loads can be considered as the crucial positions of warning-system based on the measured index of loading. The positions of the sensors for the warning-system for these three different models are not identical.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.5
• /
• pp.187-194
• /
• 2020

This study presents the energy-saving sequential control algorithm to handle indoor CO₂ and PM2.5 for the improvement of the air quality of school classrooms. To solve indoor air quality (IAQ) problems, air cleaning and ventilation systems are mainly used for school classrooms. Although air cleaning is able to collect PM2.5, it is difficult to remove harmful gas substances. The ventilation system is suitable to tackle CO and CO₂, the volume ventilation, however, is relatively small. In this paper, to remove CO₂ and PM2.5, the pollutant balance equation for improving indoor air quality is reviewed. The sequential control algorithm of the ventilation and air cleaning system with four levels of criteria is introduced for the effective removal of pollutants. The proposed sequential control algorithm confirms that indoor CO₂ and PM2.5 can be properly controlled below the standard value. In addition, the sequential operation of air cleaning and ventilation systems has shown significant improvement in IAQ compared to the independent ventilation system operation. Particularly, such systems are efficient when outdoor PM2.5 is high.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.585-594
• /
• 2011

This paper presents the use of sequential outage checkers to identify the potential cascading processes that might lead to large blackouts. In order to analyze cascading outages caused by a combination of thermal overloads, low voltages, and under-frequencies following an initial disturbance, sequential outage checkers are proposed. The proposed sequential outage checkers are verified using the AEP 9-bus system, New England 39-bus system, and IEEE 118-bus system.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.257-261
• /
• 1985

This paper deals with the personal computer based design for the sequential machines. Most part of sequential machine design have been implemented by using general purpose microprocessors in order to obtain the specific unctions required for their system. But, they have some difficulties in design stages. Knowledge of systems design method and high technology are basically applied to all the design stages.. Therefore ready made microcomputer system for personal use, personal computer, can be transformed to sequential machines by using the corresponding softwares and built-in personal computer input/output ports. Following the state transition diagram or table, we can obtain the ROM type of sequential machines directly and need not to design input/output interface except actuators and samplers because of capability of personal computer. Our main purpose of this design method are quick, flexible, reliable, modifiable circuit design of the sequential machines. In this paper, we use APPLE-II plus personal computer as target machine.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2064-2068
• /
• 2010

In this paper, we introduced a sequential intelligent image analysis system(SIIAS). This system is implemented using PTZ camera with intelligent analysis algorithm and TI's Davinci DM6446. Enter, abandon, removal and cross functions are included in our system. These functions can be used individually or in combination for object monitoring and tracking. Sequential intelligent function processing is more efficient than the previous one by virtue of accurate observation, wide area monitoring and low cost.

• Korean Journal of Mathematics
• /
• v.5 no.2
• /
• pp.211-215
• /
• 1997

In this paper, we introduce two notions of compactness defined by sequential convergence and compare them.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.153-158
• /
• 2003

Catalytic Combustion used to be applied to specific conditions because of the characteristics different from flame combustion. However, many researches are focused on widening the applicant range of catalytic combustion with the competences of catalytic combustion. The development of many catalytic combustion appliances is one of the trials to overcome the restrictions of reaction and maximize the merits. In this research, past developments of appliances are depicted and new conceptual system will be introduced - sequential system. Sequential catalytic combustion system is composed of units - existing catalytic heat exchangers. This system is performed with parallel in composition and serially in operation. First, the burden of the preheating can be dramatically reduced. Second, stable operation control is expected. Lastly, Capacity expansion is flexible.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.29-34
• /
• 2001

In this paper, a new associative memory system for analog time-sequential data processing is proposed. This system effectively associate time-sequential data using not only matching with present data but also matching with past data. Furthermore in order to improve error correction ability, weight varying in time domain is introduced in this system. The network is simulated with several periodic time-sequential input patterns including noise. The results show that the proposed system has ability to correct input errors. We expect that the proposed system may be applied for a real time processing of analog time-sequential information.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.421-426
• /
• 2010

This paper presents a method of design the counter using sequential system based on synchronous techniques. For the design the counter, first of all, we derive switching algebras and their operations. Also, we obtain the next-state functions, flip-flop excitations and their input functions from the flip-flop. Then, we propose the algorithm which is a method of implementation of the synchronous sequential digital logic circuits. Finally, we apply proposed the sequential logic based on synchronous techniques to counter.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.564-571
• /
• 1996

The logic synthesis systems for table look up(TLU) type field programmable e gate arrays(FPGAs) have so farstudied mostly the combinational logic problem m. This paper presents for mapping a sequential circuit onto a popular table look up architecture, theXilinx 3090 architecture. In thefirst for solving this problem, combinational and sequential elements which have 6 or7 input combinational and sequential elements which haveless thanor equal to 5 inputs. We heavily use the combinational synthesis techniques tosolve the sequential synthesis problem. Our syntheisis approach is very simple, but its results are reasonable. We compare seveal benchmark Examples with sis-pga(map_together and map_separate) synthesis system and the experimental results show that our synthesis system is 17% betterthan sis-pga sequential synthesis system for TLU PGAs.