• Physical Therapy Korea
• /
• v.6 no.3
• /
• pp.110-120
• /
• 1999

Lymphedema, regardless of etiology, is essentially incurable but different treatment approaches which serve to contain swelling exist. The objectives of treatment are to reduce swelling, restore shape, educate about the self-maintenance methods, and prevent inflammatory episodes, eg, recurrent cellulitis. The purpose of this report is to provide therapists and other medical staff with a general guideline through the example treatment procedure of two patients with lymphedema admitted to Samsung Medical Center. This study demonstrates the effects of the various treatments used and how they helped to achieve improvement in mobility and reduction in swelling of the lower limbs. The basic conservative treatments were sequential intermittent pneumatic pumps, elevation, and CDP (complex decongestive physiotherapy). The surgical procedures (Homan's operation) were carried out after maximal volume reduction through conservative programs. In these cases, we can see greater than 50% reduction in the lymphedema in those treated by conservative and surgical procedures. This presents a simple, reliable, variable method yielding satisfactory cosmetic and functional results for patients suffering from chronic both-leg lymphedema. Futhermore, I suggest that the outcomes are best when treatment is administered by a multidisciplinary team including a physiotherapist, surgeon, nurse, et al.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.3
• /
• pp.13-21
• /
• 2007

A forklift is a motive machine powered by LPG, diesel engine or electric motors. The internal combustion engine type forklift is equipped with automatic transmission to meet the required drive load as well as the easy operation of the vehicle. This paper deals with the shift control and endurance test controller which is developed for the functional test of the newly designed automatic transmission on a dynamometer test bench. Its major function is to control the proportional solenoid currents, which is directly related to clutch pressures, for the given reference current trajectory during shift and sequential operation of shift schedule designed for the durability test at each gear. It also has the ability to monitor all the necessary test data through RS232 communication and log them to disk files. The current controller of embedded system is designed from the identified dynamics of solenoid coil and the current reference can be easily modified with a user interface software on PC so as to match the shift data by experiments.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.5-15
• /
• 2007

In the recently released accident-investigation report on blade failure, almost 70% of blade failures was found at low pressure turbine blades, and it is well known that main cause is due to the vibration modes. This paper describes the systematic approach on the root cause of the blade failure at L 0 stage, 30MW single flow industrial steam turbine which had tripped by high vibration after ten-month commercial operation. A fracture was found at the only one damping wire hole of 59 blades, and crack was detected at three damping wire holes by NDT. According to the analysis result for the crack fracture surface and the chain of the sequential operational events, we come to the conclusion that a typical high cycle fatigue is the most dominant factor caused to the blade failure, the resonance frequency margin was narrowed by the cut damping wire and the high cycle vibration was amplified, and then the blade was broken at once by the centrifugal force when the crack reached the critical size.

• The KIPS Transactions:PartB
• /
• v.14B no.5
• /
• pp.369-376
• /
• 2007

This paper proposes a hybrid genetic algorithm(HGA) for the classifier ensemble selection. HGA is added a local search operation for increasing the fine-turning of local area. This paper apply hybrid and simple genetic algorithms(SGA) to the classifier ensemble selection problem in order to show the superiority of HGA. And this paper propose two methods(SSO: Sequential Search Operations, CSO: Combinational Search Operations) of local search operation of hybrid genetic algorithm. Experimental results show that the HGA has better searching capability than SGA. The experiments show that the CSO considering the correlation among classifiers is better than the SSO.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.742-748
• /
• 2004

In this paper are presented TSTO system analysis including some controlled variables on the engine operation such as a fuel flow rate and a pressure ratio of compressor, as well as variables on the trajectory. TSTO studied here is accelerated up to Mach 6 by a fly-back booster powered by air breathing engines. Three different types of engine cycle were treated for propulsion system of the booster, such as a turbo ramjet, a precooled turbojet and an EXpander cycle Air Turbo Ramjet (ATREX). The history of the controlled variables on the engine operation was optimized by Sequential Quadratic Programming (SQP) to accomplish the minimum fuel consumption. The trajectory was also optimized simultaneously. The results showed that the turbo ramjet gave the best fuel consumption. The optimal trajectory was almost the same except in the transonic range and just before reaching to Mach 6. The history of the pressure ratio of compressor considerably depended on the engine type. It is concluded that simultaneous optimization for engine control and trajectory is effective especially for a high-speed airplane propelled by turbojets like the TSTO booster.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.380-386
• /
• 2005

Optimal conditions of ultrafiltration (UF) and nanofiltration (NF) were investigated for separation and concentration of isoflavones and oligosaccharides from Sunmul. Levels of COD, BOD, and suspended solids (SS) in UF and NF permeates were also determined to evaluate effectiveness of these processes for reducing water pollution. Optimal UF operation conditions to achieve minimal fouling and maximal flux were $33-34^{\circ}C$ operating temperature and 2.3-2.4 bar trans-membrane pressure. Recovery yields of isoflavones and oligosaccharides in UF retentate were 11.49-28.16% and 12.77-27.57%, respectively. Increase in volumetric concentration factor (VCF) resulted in more functional compounds of isoflavones and oligosaccharides passing through UF membrane. Total isoflavone and oligosaccharide yields decreased by 3% as VCF increased from 6.0 to 8.0 and from 8.0 to 10.0, while decreased significantly by 10% as VCF decreased from 4.0 to 6.0. Optimal NF operating conditions were 192-195 psig operating pressure at $30-33^{\circ}C$. Total yields of isoflavones and oligosaccharides significantly decreased at VCF 8.0, whereas did not decrease up to VCF 6.0 during NF operation. Therefore, VCF 6.0 was recommended for economical process. COD and BOD decreased by more than 98% after NF process, and SS were not detected after UF process. These results indicated sequential filtration process was useful for separation of isoflavones and oligosaccharides from Sunmul and for reducing water contaminants.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.380-386
• /
• 2015

Guaranteeing quality of service over a multihop wireless network is difficult because end-to-end (ETE) delay is accumulated at each hop in a multihop flow. Recently, research has been conducted on network coding (NC) schemes as an alternative mechanism to significantly increase the utilization of valuable resources in multihop wireless networks. This paper proposes a new section-based joint NC and scheduling scheme that can reduce ETE delay and enhance resource efficiency in a multihop wireless network. Next, this paper derives the average ETE delay of the proposed scheme and simulates a TDMA network where the proposed scheme is deployed. Finally, this paper compares the performance of the proposed scheme with that of the conventional sequential scheduling scheme. From the performance analysis and simulation results, the proposed scheme gives more delay-and energy-efficient slot assignments even if the NC operation is applied, resulting in a use of fewer network resources and a reduction in ETE delay.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.133-136
• /
• 2002

This paper presents a new method of Huffman decoding which gives a significant improvement of processing efficiency based on the reconstruction of an efficient one-dimensional array data structure incorporating the numeric interpretation of the accrued codewords in the binary tree. In the Proposed search method, the branching address is directly obtained by the arithematic operation with the incoming digit value eliminating the compare instruction needed in the binary tree search. The proposed search method gives 30% of improved Processing efficiency and the memory space of the reconstructed Huffman table is reduced to one third compared to the ordinary ‘compare and jump’ based binary tree. The experimental result with the six MPEG-2 AAC test files also shows about 198% of performance improvement compared to those of the widely used conventional sequential search method.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.655-658
• /
• 2005

Due to reduced device sizes and threshold voltages, leakage current becomes an important issue in CMOS design. In a CMOS combinational logic circuit, the leakage current in the standby state depends on the state of the inputs and thus can be minimized by applying an optimal input when the circuit is idling. In this paper, we present a New Input Vector Control algorithm, called Leakage Minimization by Input vector Control (LMIC) for minimal leakage power. This algorithm finds the minimal leakage vector and reduces leakage current up to 22.% on the average, for TSMC 0.18um process parameters. Minimal leakage vectors are very useful in reducing leakage currents in standby mode of operation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.343-346
• /
• 2000

This paper presents a filter bank designed for the multi-channel audio equalizer. A time-shared multiplier is also proposed to implement the equalizer with a minimum number of gates when it is synthesized with ASIC or FPGA. Further reduction of the number of required gates is achieved by designing the multiplier based on a cascaded sequential circuit utilizing partial multiplications. The equalizer is realized with FPGA and its real-time operation verifies the reliability and high fidelity of the designed system.