• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.21-30
• /
• 2000

Numerical design optimization techniques are implemented for the improvement of the ram accelerator performance. The design object is to find the minimum ram tube length required to accelerate projectile from initial velocity $V_o$ to target velocity $V_e$. The premixture is composed of $H_2$, $O_2$, $N_2$ and the mole numbers of these species are selected as design variables. The objective function and the constraints are linearized during the optimization process and gradient-based Simplex method and SLP(Sequential Linear Programming) have been employed. With the assumption of two dimensional inviscid flow for internal flow field, the analyses of the nonequilibrium chemical reactions for 8 steps 7 species have been performed. To determined the tube length, ram tube internal flow field is assumed to be in a quasi-steady state and the flow velocity is divided into several subregions with equal interval. Hence the thrust coefficients and accelerations for corresponding subregions are obtained and integrated for the whole velocity region. With the proposed design optimization techniques, the total ram tube length had been reduced 19% within 7 design iterations. This optimization procedure can be directly applied to the multi-stage, multi-premixture ram accelerator design optimization problems.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.244-251
• /
• 2003

A two-dimensional BEM code, $FRACOD^{2D}$, was applied to simulate fracture initiation and propagation processes in a rock pillar during an in situ heater test of a rock pillar planned at the $\"{A}sp\"{o}$ Underground Rock laboratory of SKB, in Southern Sweden. To take the advantage of conventional BEM for simulating fracturing processes, but without efforts for domain integral transformation, a hybrid approach is developed to simulate the fracturing processes in rock pillar under coupled thermo-mechanical loading. The code FRACOD was used for simulating the fracture initiation and propagation processes with its boundary tractions reflecting the effects of the initial and redistributed thermomechanical stresses in the domain of interest at multiple excavation and heating steps were produced by a special algorithm of stress inversion, based on resultant thermo-mechanical stress fields at each excavation and heat loading step by a FEM code without considering fracturing processes. This hybrid approach can take the advantages of both types of numerical methods and avoids their shortcomings for fracturing process simulation and domain effects, respectively. In this paper, we present the hybrid approach for the stress, displacements, and fracturing processes at sequential excavation and heating steps of the in situ heater test as a predictive modelling, the formulation of the fracturing models and the predictive results. Two sections of borehole depth, 0.5 m and 1.5 m below the tunnel floor are considered. The pillar area is modelled with the FRACOD and the stress field produced by excavation and heating is transferred with corresponding boundary stresses. From the modelling results, the degree of fracturing and damage are evaluated for 120 days of heating. Dominated shear fracturing in the vicinity of the central pillar was observed from the models at both sections, but spalled area appears to be limited. Based on the modelling results, a sensitivity study for the effect of pre-existing fractures in the vicinity of the holes is also conducted, and the initiation and evolution of EDZ around the deposition holes are investigated using this particular numerical technique.

• Tuberculosis and Respiratory Diseases
• /
• v.66 no.3
• /
• pp.225-229
• /
• 2009

Churg-Strauss syndrome (CSS) is a disorder that is characterized by asthma, hypereosinophilia and systemic vasculitis affecting a number of organs. The manifestations of acute cholecystitis and diffuse alveolar hemorrhage are rarely reported in CSS. A 22-year-old woman with bronchial asthma visited our hospital complaining of right upper quadrant pain with a sudden onset. The abdominal computed tomography (CT) scan revealed gall bladder edema consistent with acute cholecystitis. On the initial evaluation, marked hypereosinophilia was observed in the peripheral blood smear. The nerve conduction velocity measurements and a skin biopsy performed to confirm the organ involvement of disease indicated typical mononeuritis multiplex and necrotizing vasculitis, respectively, which was complicated with CSS. On the 12th hospital day, ground glass opacity and consolidations were newly developed on both lung fields. The bronchoalveolar lavage (BAL) fluid showed increasing bloody return in sequential aliquots that were characteristic of a diffuse alveolar hemorrhage. We report a case of CSS with acute cholecystitis and diffuse alveolar hemorrhage.

• Annals of Clinical Neurophysiology
• /
• v.4 no.1
• /
• pp.34-37
• /
• 2002

Background : The term "mononeuropathy multiplex" means simultaneous or sequential involvement of individual noncontiguous nerve trunks, evolving over days to years. The aim of this study was to delineate the causes, clinical features, and detailed electrophysiological findings in the patients with mononeuropathy multiplex. Methods : We analyzed the medical records of 22 patients with mononeuropathy multiplex confirmed on electrophysiological studies in Inje University Seoul Paik Hospital, Seoul Municipal Boramae Hospital, and Seoul National University Hospital between 1991 to 2000. Results : The number of male and female patients was equal. The mean age was 48 years with a peak incidence in the sixth decade. The etiology could be divided into vasculitis(11 patients) or non-vasculitis group. In vasculitis group, Churg-Strauss syndrome, polyarteritis nodosa, and rheumatoid arthritis were included. The non-vasculitis group included diabetes mellitus, leprosy, and Guillain-Barre syndrome. Ulnar and median nerves were most commonly involved(91%). In descending order of frequency, peroneal, posterior tibial, sural, and radial nerves were also involved. Bilateral involvement occurred most commonly in ulnar nerve. The symptoms and signs of mononeuropathy multiplex were the initial manifestations in 12 patients(55%), which was more frequent in vasculitis group(73%). Nerve conduction abnormalities could be divided into axonal, demyelinating, or mixed type. Most(91%) of the patients in vasculitis group revealed axonal type abnormalities. The location of the nerve lesion was frequently related to potential site of entrapment in demyelinating type. Conclusions : Mononeuropathy multiplex is the presenting features of the etiological disease frequently, especially in vasculitis group. Nerve conduction studies(NCS) reveals not only axonal type but also demyelinating type abnormalities. The etiological diseases were different in each type. Therefore, NCS is very helpful for the early etiological diagnosis and therapeutic implication in the patients with mononeuropathy multiplex.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.18-24
• /
• 2003

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative sybcycles. Previous researches predifined the numbers of design processes in groups, but these group sizes should be determined optimally to balance the computing time of each groups. This paper proposes adaptive decomposition method, which determines the group sizes and the order of processes simultaneously to raise design efficiency by expanding the chromosome of the genetic algorithm. Finally, two sample cases are presented to show the effects of optimizing the sequence of processes with the adaptive decomposition method.

• Clinical and Experimental Pediatrics
• /
• v.54 no.6
• /
• pp.234-240
• /
• 2011

Acute disseminated encephalomyelitis (ADEM) is a demyelinating disease of the central nervous system (CNS) that typically presents as a monophasic disorder associated with multifocal neurologic symptoms and encephalopathy. ADEM is considered an autoimmune disorder that is triggered by an environmental stimulus in genetically susceptible individuals. The diagnosis of ADEM is based on clinical and radiological features. Most children with ADEM initially present with fever, meningeal signs, and acute encephalopathy. The level of consciousness ranges from lethargy to frank coma. Deep and subcortical white-matter lesions and gray-matter lesions such as thalami and basal ganglia on magnetic resonance imaging (MRI) are associated with ADEM. In a child who presents with signs of encephalitis, bacterial and viral meningitis or encephalitis must be ruled out. Sequential MRI is required to confirm the diagnosis of ADEM, as relapses with the appearance of new lesions on MRI may suggest either multiphasic ADEM or multiple sclerosis (MS). Pediatric MS, defined as onset of MS before the age of 16, is being increasingly recognized. MS is characterized by recurrent episodes of demyelination in the CNS separated in space and time. The McDonald criteria for diagnosis of MS include evidence from MRI and allow the clinician to make a diagnosis of clinically definite MS on the basis of the interval preceding the development of new white matter lesions, even in the absence of new clinical findings. The most important alternative diagnosis to MS is ADEM. At the initial presentation, the 2 disorders cannot be distinguished with certainty. Therefore, prolonged follow-up is needed to establish a diagnosis.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.53-62
• /
• 1998

In this research, 7 species of white rot fungi were used for determining the resistance against pentachlorophenol (PCP). Three fungi with good PCP resistance were selected for evaluating the biodegradability, and biodegradation mechanism by HPLC and GC/MS spectrometry. Among 7 fungi, there were significant differences on PCP resistance on 4 different PCP concentrations. In the concentrations of 50 and 100ppm ($\mu$g of PCP per g of 2% malt extract agar), most fungi were easily able to grow, and well suited to newly PCP-added condition, but in that of more than 250ppm, the mycelia growths of Ganoderma lucidum 20435, G. lucidum 20432, Pleurotus ostreatus, and Daldinia concentrica were significantly inhibited or even stopped by the addition of PCP to the culture. However, Trametes versicolor, Phanerochaete chrysosporium, and Inonotus cuticularis still kept growing at 250ppm, indicating the potential utilization of wood rot fungi to high concentrated PCP biodegradation. Particularly, P. chrysosporium even showed very rapid growth rate at more than 500ppm of PCP concentration. Three selected fungi based on the above results showed an excellent biodegradability against PCP. P. chrysosporium degraded PCP up to 84% on the first day of incubation, and during 7 days, most of added PCP were degraded. T. versicolor also showed more than 90% of biodegradability at 7th day, and even though the initial stage of degradation was very slow, I. cuticularis has been approached to 90% at 21 st day after incubation with dense growing pattern of mycelia. Therefore, the PCP biodegradability was definitely dependent on the rapid suitability of fungi to newly PCP-added condition. In addition, the PCP biodegradation by filtrates of P. chrysosporium, T. versicolor, and I. cuticularis was very minimal or limited, suggesting that the extracellular enzyme system may be not so significantly related to the PCP biodegradation. Among the biodegradation metabolites of PCP, the most abundant one was pentachloroanisole which resulted in a little weaker toxicity than PCP, and others were tetrachlorophenol, tetrachloro-hydroquinone, benzoic acid, and salicylic acid, suggesting that PCP may be biodegraded by several sequential reactions such as methylation, radical-induced oxidation, dechlorination, and hydroxylation.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.63-72
• /
• 1998

In order to evaluate the biodegradability and mechanism of 4,5,6-trichloroguaiacol (TCG) produced from bleaching process in pulp mill by Phanerochaete chrysosporium, Trametes versicolor, and Inonotus cuticularis, changes in TCG and its metabolites during biodegradation were analyzed by HPLC, and GC/MS spectrometry. By three fungi, the maximum biodegradability against TCG were very quickly reached, compared with other chlorinated aromatic compounds such as PCP. Within 24 hrs, T versicolor indicated up to 95% of TCG removal rate, and P. chrysosporium and I. cuticularis also showed more than 80%, and 90%, respectively. Particularly, in case of T. versicolor, the removal rate of TCG after 1 hr. incubation was reached to approximately 90%, implying very rapid metabolization of TCG. However, by analyzing the filtrates extracted from TCG containing culture by GC/MS, the major metabolites at initial stage of biodegradation were dimers, indicating that the added TCG monomers were quickly polymerized. The others were trichloroveratrole, dichloroguaiacol, and trichlorobenzoic acid, suggesting that TCG may be biodegraded by several sequential reactions such as polymerization, oxidation, methylation, dechlorination, and hydroxylation. In other experiments, the extracellular fluid which did not contain any fungal mycelia was used to evaluate the effect of mycelia on TCG biodegradation. The extracellular fluid of T. versicolor also biodegraded TCG up to 90% within 24hrs, but those of P. chrysosporium and I. cuticularis did not show any good biodegradability. T versicolor showed the highest value of laccase, and other two fungi indicated a little activity of lignin peroxidase (LiP) and manganese peroxidase (MnP). In addition, the laccase activity of T. versicolor was very linearly proportional to the removal rate of TCG during incubation, in other words, showing the induction effect against TCG. Consequently, the biodegradation of TCG was very dependent upon the activity of laccase.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.2
• /
• pp.89-96
• /
• 2001

Carbohydrate and soluble protein reserves and regrowth characteristics in response to cutting height were investigated over four regrowth cycles of turf-type perennial ryegrass(Lolium perenne L. cv. preludeII). When the plants were at the full-vegetative stage (twelve weeks-old), three sequential defoliations at 3, 6 and 9 cm above the root base were imposed at 2-week intervals. Shoot dry weight in all three treatments continuously decreased with progressing regrowth cycle and the decreasing rate was higher as cutting height was lowered. TNC (total non-structural carbohydrate) in stubble at the end of the fourth regrowth cycle in 3, 6 and 9 cm cutting height decreased by 98%, 82% and 27%, respectively, comparing the initial content. TNC in roots also largely decreased with similar pattern in response to cutting height, whereas the absolute amount was much less compared to stubble. Soluble protein in stubble in 3, 6 and 9 cm cutting height decreased by 98%, 82% and 57%, respectively, at the end of fourth regrowth. A significant correlations between TNC (r=0.906) or protein (r=0.879) at the fourth defoliation and dry weight of regrowing shoots at the end of fourth regrowth were observed. these results indicated that cutting height closely influences the levels of organic reserves available for new growth, and that the levels of reserves might provide a useful tool as a determinant for regrowth dynamics.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.1
• /
• pp.14-21
• /
• 2015

Objective: It has previously been suggested that embryos developing from intracytoplasmic sperm-injected (ICSI) zygotes with three pronuclei (3PN) are endowed with a mechanism for self-correction of triploidy to diploidy. 3PN are also observed in zygotes after conventional in vitro fertilization (IVF). The parental origin, however, differs between the two fertilization methods. Whereas the vast majority of 3PN IVF zygotes are of dispermic origin and thus more likely to have two centrioles, the 3PN ICSI zygotes are digynic in origin and therefore, more likely to have one centriole. In the present study, we examine whether the parental origin of 3PN embryos correlates with the karyotype. Methods: The karyotype of each nucleus was estimated using four sequential fluorescence in situ hybridizations-each with two probes-resulting in quantitative information of 8 different chromosomes. The karyotypes were then compared and correlated to the parental origin. Results: 3PN ICSI embryos displayed a significantly larger and more coordinated reduction from the assumed initial 3 sets of chromosomes than 3PN IVF embryos. Conclusion: The differences in the parental origin-and hence the number of centrioles-between the 3PN IVF and the 3PN ICSI zygotes are likely to be the cause of the differences in karyotypes.