• 제목/요약/키워드: Sequential initial

검색결과 244건 처리시간 0.03초

Reactive Extrusion of Starch-g-Polyacrylonitrile in the Preparation of Absorbent Materials

  • Yoon, Kee-Jong;Carr, M.E.;Bagley, E.B.
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 1990년도 제2차 학술발표초록집
    • /
    • pp.8-8
    • /
    • 1990
  • A new method for the graft polymerization of acrylonitrile onto starch is presented. Graft polymerization of acrylonitrile onto starch and the subsequent hydrolysis in sodium hydroxide solution to prepare absorbents is well known. This process has been utilized to produce the commercial product, Super Slurper. In a typical batch process, ~5% starch in water mixture is gelatinized at $95^{\circ}C$ under stirring for 1 hour then cooled to room temperature. The graft polymerization itself is carried out for approximately 2 hours at $25~30^{\circ}C$ on the gelatinized starch by eerie ion initiation. In this study, graft polymerization of acrylonitrile onto starch via a reactive extrusion process which is a continuous, efficient process is described. Initial concentration of starch in water is 35% and the reaction temperatures are between $50~80^{\circ}C$. However, the most significant difference in the reactive extrusion process is the short time in which the graft polymerization takes place. Preliminary results on the properties of graft polymerization products obtained from the reactive extrusion process are compared to those obtained from the batch process as well as the absorbency of the hydrolyzed samples. Absorbent material has also been prepared by sequential grafting and saponification in the extruder followed by a 2 hour heat treatment of the extrudate in an air circulated oven at $100^{\circ}C$.

  • PDF

관절계 역학적 특성의 정량적 평가방법 (A New Method for the Identification of Joint Mechanical Properties)

  • 엄광문;김석주;한태륜
    • 한국정밀공학회지
    • /
    • 제21권11호
    • /
    • pp.209-218
    • /
    • 2004
  • The purpose of this paper is to suggest a practical and simple method for the identification of the joint mechanical properties and to apply it to human knee joints. The passive moment at a joint was modeled by three mechanical parts, that is, a gravity term, a linear damper term and a nonlinear spring term. Passive pendulum tests were performed in 5 fat and 5 thin men. The data of pendulum test were used to identify the mechanical properties of joints through sequential quadratic programming (SQP) with random initial values. The identification was successful where the normalized root-mean-squared (RMS) errors between the simulated and experimental joint angle trajectories were less than 10%. The parameter values of mechanical properties obtained in this study agreed with literature. The inertia, gravity and the damping constant were greater at fat men, which indicates more resistance to body movement and more energy consumption fer fat men. The suggested method is noninvasive and requires simple setup and short measurement time. It is expected to be useful in the evaluation of joint pathologies.

Two-dimensional numerical investigation of the effects of multiple sequential earthquake excitations on ancient multi-drum columns

  • Papaloizou, Loizos;Polycarpou, Panayiotis;Komodromos, Petros;Hatzigeorgiou, George D.;Beskos, Dimitri E.
    • Earthquakes and Structures
    • /
    • 제10권3호
    • /
    • pp.495-521
    • /
    • 2016
  • Ancient monuments of Greek and Roman classical architecture usually consist of multi-drum columns that are constructed of stone blocks placed on top of each other. Several research studies deal with the seismic behaviour of such structures, since earthquakes are common causes of destruction of such monuments. This paper investigates the effect of multiple earthquakes on the seismic performance of multi-drum columns, through numerical simulations and parametric analyses. The Discrete Element Method and an appropriate contact model have been implemented in a specially developed software application that is able to efficiently perform the necessary simulations in two dimensions. Specifically, various strong ground excitations are used in series for the computation of the collective final deformation of multi-drum columns. In order to calculate this cumulative deformation for a series of ground motions, the individual deformation of the column for each excitation is computed and then used as initial conditions for the next earthquake excitation. Various multi-drum columns with different dimensions are also considered in the analyses in order to examine how the geometric characteristics of columns can affect their seismic sequence behaviour, in combination with the excitation frequency content.

Development of a Hybrid Deep-Learning Model for the Human Activity Recognition based on the Wristband Accelerometer Signals

  • Jeong, Seungmin;Oh, Dongik
    • 인터넷정보학회논문지
    • /
    • 제22권3호
    • /
    • pp.9-16
    • /
    • 2021
  • This study aims to develop a human activity recognition (HAR) system as a Deep-Learning (DL) classification model, distinguishing various human activities. We solely rely on the signals from a wristband accelerometer worn by a person for the user's convenience. 3-axis sequential acceleration signal data are gathered within a predefined time-window-slice, and they are used as input to the classification system. We are particularly interested in developing a Deep-Learning model that can outperform conventional machine learning classification performance. A total of 13 activities based on the laboratory experiments' data are used for the initial performance comparison. We have improved classification performance using the Convolutional Neural Network (CNN) combined with an auto-encoder feature reduction and parameter tuning. With various publically available HAR datasets, we could also achieve significant improvement in HAR classification. Our CNN model is also compared against Recurrent-Neural-Network(RNN) with Long Short-Term Memory(LSTM) to demonstrate its superiority. Noticeably, our model could distinguish both general activities and near-identical activities such as sitting down on the chair and floor, with almost perfect classification accuracy.

기관지 결핵 치료에 있어서 스테로이드의 효과 (The Effect of Steroid on the Treatment of Endobronchial Tuberculosis)

  • 성윤업;김상훈;신종욱;임성용;강윤정;고형기;박인원;최병휘;허성호
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권2호
    • /
    • pp.130-141
    • /
    • 1995
  • 연구배경: 기관지 결핵은 조기 진단하여 유효적절한 치료를 시행하지 않을시 기관지 협착증이 병발하며, 일단 기관지 협착증이 발생되면 이에대한 치료가 어려울 뿐만아니라 원위부 폐의 허탈로 지속적인 호흡 곤란, 기침, 객혈 및 천명음을 초래하며 무기폐, 기관지 확장증, 이차적 폐렴과 같은 합병증을 유발한다. 따라서 기관지 결핵 치료시 기관지 협착의 예방을 위해 스테로이드 병용 투여가 시도되어 왔는데, 지금까지의 연구 결과에 의하면 스테로이드의 유용성은 확실하지 않다. 이에 저자 등은 스테로이드 사용의 유용성을 판단하고 기관지 결핵 치료에 따른 기관지 내시경 경과 관찰 소견, 폐기능 검사 및 흉부 방사선 호전 소견을 관찰하여 기관지 결핵에 의한 기관지 협착증의 예방 및 치료에 도움이 되고자하였다. 방법: 1988년부터 1992년까지 중앙대학교 부속병원에서 기관지 결핵을 진단 받은 환자 58명을 대상으로 하여 항결핵 요법만을 시행한 군(control group, n=39)과 스테로이드 병용 요법을 시행한 군(steroid group, n=19) 사이의 기관지 내시경 추적 관찰 소견, 폐기능 검사 및 흉부 방사선 촬영상 호전 소견을 비교 분석하였다. 결과: 1) 기관지 결핵은 20대 젊은 여성에서 호발하였다. 2) 치료전 양 군간 기관지 내시경에 의한 형태학적 분포상 가장 많은 형태는 건락성 괴사형과 섬유화를 동반하지 않은 협착형이었다. 3) 기관지 내시경에 의한 육안적 경과 관찰 소견상 양군 모두에서 호전 소견을 관찰할 수 있었으며 행태학적 분류에 따른 호전 소견 빈도에 있어서도 양 군간 유의한 차이는 없었다. 4) 흉부 방사선 및 폐기능 검사 경과 관찰 소견상 양군에서 모두 호전소견을 관찰할 수 있었으며 양군간 유의한 차이는 없었다. 5) 스테로이드 사용을 중단할 만한 부작용은 관찰되지 않았다. 결론: 이상의 결과로 기관지 결핵 치료에 있어서 스테로이드 병용 요법은 질환의 치료 경과에 커다한 영향을 미치지는 않는 것으로 판단된다.

  • PDF

적응적 양자화와 순차적 병합 기법을 사용한 컬러 영상 분할 (Color Image Segmentation Using Adaptive Quantization and Sequential Region-Merging Method)

  • 곽내정;김영길;권동진;안재형
    • 한국멀티미디어학회논문지
    • /
    • 제8권4호
    • /
    • pp.473-481
    • /
    • 2005
  • 본 논문은 적응적 양자화 컬러 수와 적응적 병합 임계값을 이용하여 순차적으로 영역을 병합하여 영역의 경계를 보존하며 영상을 분할하는 방법을 제안한다. 제안방법은 먼저 PSNR을 이용하여 영상에 따라 다른 양자화 컬러 수로 영상을 벡터 양자화 한다. 그리고 양자화 영상을 이용하여 초기 영역을 설정한 후 CIE Lab와 RGB 컬러 공간에서 순차적으로 유사한 영역을 병합하여 영상의 주요 영역들로 분할한다. 병합의 각 단계에서는 유사성의 척도로 인접 영역의 컬러 거리를 사용하며 병합 임계값은 분할된 영역과 원영상의 컬러 거리의 평균과 평균 변화량을 이용하여 적응적으로 구하였다. 또한 RGB 컬러 공간에서의 병합 영상이 주요 영역 단위로 병합되지 않은 경우 후처리로서 CIE Lab 영역에서 다시 한번 병합을 수행한다. 이때 초기 영역 영상과 RGB 컬러 공간에서의 병합 영상의 영역간의 컬러 거리를 이용하여 병합 유무를 결정한다. 실험 결과는 제안방법에 의한 결과 영상이 주요 객체를 중심으로 분할되며 객체의 경계가 잘 보존됨을 보여준다. 또한 객관적인 척도에서도 기존의 방법에 비해 좋은 결과를 보여준다.

  • PDF

Seven-day and In-hospital Mortality According to Left and Right Ventricular Dysfunction in Patients With Septic Shock

  • Sua Kim;Hyeri Seok;Beong Ki Kim;Yu Jin Kim;Seung Heon Lee;Je Hyeong Kim;Yong-Hyun Kim
    • Korean Circulation Journal
    • /
    • 제53권12호
    • /
    • pp.813-825
    • /
    • 2023
  • Background and Objectives: The prognostic implications of septic cardiomyopathy have not been clearly demonstrated. We evaluated serial changes in left ventricular (LV) and right ventricular (RV) function in patients with septic shock and their prognostic value on 7-day and in-hospital mortality. Methods: Transthoracic echocardiography was performed within 48 hours of the diagnosis of septic shock and 7 days after the initial evaluation. In addition to traditional echocardiographic parameters, LV and RV function was evaluated using global longitudinal strain (GLS), and tricuspid annular plane systolic excursion (TAPSE). Results: A total of 162 patients (men, 83, 51.5%; 70.7±13.4 years; Acute Physiology and Chronic Health Evaluation [APACHE] II, 30.6±9.2) were enrolled. Initial GLS and TAPSE were -14.9±5.2% and 16.9±5.5 mm, and improved in the follow-up evaluation (GLS, -17.6±4.9%; TAPSE, 19.2±5.4 mm). Seven-day and in-hospital mortality were 24 (14.9%) and 64 (39.8%). Seven-day mortality was significantly associated with initial GLS >-16% (odds ratio [OR], 14.066, 95% confidence interval [CI], 1.178-167.969, p=0.037) and APACHE II score (OR, 1.196, 95% CI, 1.047-1.365, p=0.008). The in-hospital mortality of 7-day survivors was associated with follow-up TAPSE <16 mm (OR, 10.109, 95% CI, 1.640-62.322, p=0.013) and Sequential Organ Failure Assessment score (OR, 1.340, 95% CI, 1.078-1.667, p=0.008). GLS was not associated with in-hospital mortality of 7-day survivors. Conclusions: Fluctuation of both ventricular function was common in septic shock. Seven-day mortality of patients with septic shock was related to GLS, whereas in-hospital mortality of 7-day survivors was related to TAPSE, not to GLS.

체이동 매듭과 추가적인 반 매듭 증가에 따른 매듭의 장력 변화와 최적 유지력 (Sliding Knots and the Effect of Additional Half-Hitch Knots on Optimal Knot-Holding Capacity)

  • 허창룡;김승호;김병관;유재철
    • 대한관절경학회지
    • /
    • 제8권1호
    • /
    • pp.37-44
    • /
    • 2004
  • 목적: 잠김(Locking)이 가능한 이동 매듭의 (sliding knot) 최적 매듭 유지력 (knot-holdingcapacity KHC)을 가지기 위한 추가적인 반 매듭의 (additional half-hitches) 개수를 알아보고자 하였다. 대상 및 방법: 4가지의 관절경적 이동 매듭법 (Duncan매듭법, Field 매듭법, Giant매듭법, SMC매듭법)을 대상으로 매듭 유지력을 실험하였다. 각각의 매듭을 만들기 위해 처음의 이동 매듭과 추가적인 5개의 반 매듭으로 구성된 6개의 연속적인 매듭을 만들었다. 각각의 추가된 반 매듭은 서로 교차하며 매듭의 지대 (post)도 교차하여 매는 방식으로 (reversing half-hitches with alternate posts, RHAPS) 하였다. 각각의 연속적인 매듭을 구성하기위해 No.2 Ethibond봉합사를 이용하여 각각의 매듭 형태에 12개의 매듭을 만들었다. 매듭의 인장 및 유지력 실험은 servohydraulic material testing system(Instron 8511, MTS, Minneapolis, MN)으로 주기적 부하(cyclic loading)를 시켜, 임상적으로 실패라 규정한 3 mm의 전위가 생길 때까지의 부하 (load to clinical failure). 매듭이 완전히 실패했을 때의 부하 강도 (load to ultimate failure), 그리고 실패 형태 (mode of failure)를 측정하였다. 결과: 추가적인 반 매듭이 없는 최초의 이동 매듭 자체로는 대부분 주기적 부하에 의해 매듭의 실패를 보였다. 주기적 부하 검사에서 각각의 추가적인 반 매듭이 증가할수록 평균 전위 값은 감소하였다. SMC 매듭법과 Giant 매듭법은 하나의 추가적인 반 매듭 이후로 0.1 mm이하의 전위 값을 보였고 Field와 Duncan 매듭법은 3개의 추가 반매듭이 필요하였다. SMC 매듭법과 Duncan 매듭법은 80 N을 견디기 위해 단 하나의 추가 반 매듭이 필요하였고, Field와 Giant 매듭법은 2개의 추가 반 매듭이 필요하였다. 100 N이상의 부하를 견디기 위해서는 SMC 매듭법은 3개의 추가 반 매듭이 필요하였고, 다른 3가지의 매듭법은 4개의 추가 반 매듭이 필요하였다. 추가 반 매듭이 증가함에 따라 봉합사는 풀리는 것보다 끊어지는 양상을 보였다. Duncan매듭법은 5개의 추가 반 매듭 이후에도 풀림현상을 보였고, 다른 3개의 매듭법은 3개의 추가 반 매듭 이후엔 75%이상이 봉합사의 풀림 현상보다는 끊어지는 양상을 보였다. (SMC, Field 매듭법은 92%, Ciant 매듭법은 75%)결론: 어떤 매듭법이라도 이동 매듭법 만으로는 주기적 부하 검사를 견디지 못했다. 모든 종류의 실험에서 SMC 매듭법은 최소2개의 두개의 추가 반 매듭이 필요하였다. Duncan 매듭법은 최적 매듭 유지력을 위해 3개 이상의 추가 반 매듭이 필요하였다. 모든 매듭법에서 3개나 그 이상의 추가 반 매듭이 최적 유지력에서 정점에 가까운 양상을 보였다.

  • PDF

고응력 분석을 통한 양산단층의 구조운동사 (Movement History of the Yangsan Fault based on Paleostress Analysis)

  • 장천중;장태우
    • 지질공학
    • /
    • 제8권1호
    • /
    • pp.35-49
    • /
    • 1998
  • 양산단층의 구조운동사를 해석하기 위하여 양산단층의 주향을 따라양산시에서 경북 신광면까지 37개 지점에서 단층조선이 발달된 약 1,000개의 소단층과 330개의 인장절리를 분석하였다. 그 결과 순서별로 (I)NW-SE 신장, (Il) ENE-WSW 압축과 NNW-SSE 신장, (III) NW-SE 압축, (VI) NNE-SSW 신장, (V) E-W 압추과 N-S 신장, 그리고 (VI) NNE-SSW 압축과 신장의 6개의 지구조 사건이 복원되었다.이렇게 얻어진 6개의 순차적인 지구조 사건으로부터 북북동향하는 양산단층의 운동를 해석할때, 양산단츠의 형성 초기에는 NW-SE 신장기를 갖는 지구조 사건 (I)과 연관된 인장절리가 발달하였고, 후에 지구조 사건(I)과 매우 밀접한 사건(Il)에 의해 우수향 주향이동을 하였다. 이러한 운동은 마이오세 말까지 지속되었으며, 이 시기가 양상단층이 가장 활발이 운동했던 시기로 해석된다. 후속되는 지구조 사건(III)과 (VI)에 의해 양상단층은 좌수향 주향이동을 하였다. 그 후 양산단층의 운동은 단층주향에 직각으로 작용하는 사건 (V)에 의해 일시적으로 접지도었다. 이기간은 시기적으로 매우 일시적이었으며 응력의 크기도 역기 작은 것으로 판단된다. 마지막으로 지구조 사건 (VI)에 의한 미약한 신장 혹은 우수향 주향이동을 하였다.

  • PDF

원자력발전소 케이블관통부 충전시스템 평가용 소프트웨어 개발 I (Development of a Software to Evaluate the CPES(Cable Penetration Fire Stop) System in Nuclear Power Plane I)

  • 윤종필;권성필;조재규;윤인섭
    • 한국화재소방학회논문지
    • /
    • 제18권1호
    • /
    • pp.24-30
    • /
    • 2004
  • 본 논문은 원자력발전소 방화벽에 설치된 케이블관통부 충전시스템(CPFS: Cable Penetration Fire Stop)안에서 일어나는 동적 열 전달 현상을 해석하기 위해 수행된 실험을 다루고 있다. Dow Corning사의 내화성 충전물에 대해서 내화실험이 수행되었으며, 본 실험을 통해 준비된 CPFS 시험체가 성능위주 시험방법인 ASTM E-814의 F-rating과 T-rating을 동시에 만족시킬 수 있는지를 알아보았다. 그리고 여기서 얻어진 실험결과는 CPFS시스템 내화성능 평가용 소프트웨어를 개발하기 위해 사용되었다. CPFS 시스템 내에서의 열전도 현상은 주어진 초기조건과 경계조건 하에서 Parabolic PDE(Partial differential equation)로 수식화 되었으며, 이렇게 수식화된 PDE는 다시 연속과완화법(SOR: Sequential over-relaxation)과 Galerkin 유한요소법(FEM: Finite element method)로 구성된 혼합알고리즘에 따라 풀 수 있었다. PDE을 풀기 위해 널리 사용되고 있는 상용소프트웨어 Femlab을 이용하여 방화시스템 내에서의 온도분포를 계산하여 3차원 그래픽으로 나타내었다. 특히 CPFS시스템 내에서의 시간의 경과에 따른 온도분포의 변화에 대한 실험과 수치해석을 병행함으로써 결과에 대한 신뢰성을 높일 수 있었다.