• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.13-20
• /
• 2004

Manufacturing process for the microfluidic device can include such sequential steps as master fabrication, electroforming, and injection molding. The laser ablation using masks has been applied to the fabrication of channels in microfluidic devices. In this study, manufacturing of polymer master and mold insert for micro injection molding was investigated. Ablation of PET (polyethylene terephthalate) by the excimer laser radiation could be used successfully to make three dimensional master fur nickel mold insert. The mechanism fur ablative decomposition of PET with KrF excimer laser $({\lambda}: 248 nm, pulse duration: 5 ns)$ was explained by photochemical process, while ablation mechanism of PMMA (polymethyl methacrylate) is dominated by photothermal process, the .eaction between PC (polycarbonate) and KrF excimer laser beam generate too much su.face debris. Thus, PET was adopted in polymer master for nickel mold insert. Nickel electroforming using laser ablated PET master was preferable for replication method. Finally, it was shown that excimer laser ablation can substitute for X-ray lithography of LIGA process in microstructuring.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.113-125
• /
• 1998

The neurotropic psudorabies virus(PRV) to replicate within neurons is very useful pathogen for neuronal tracing. I carried out this study to investigate the parametric analysis on the viral infection in the rat circadian control center with two genetically engineered strains out of PRV. The two strains are isogenic with the attenuated Bartha strain of PRV ; in one strain a lacZ reporter gene was inserted into the gC locus (PRV-BaBlu ; $4.75\times10^8pfu/ml$) and the other strain contained a PRV envelope glycoprotein gene(PRV-D ; $2.5\times10^8pfu/ml$) theat is absent in PRV-BaBlu. simultaneous or temporally separated sequential injection of$2{\mu}l$ of each strain into the vetreous body of eye produced a course of transsynaptic infection of retinohypothalamic circuitry. The results were as follows; 1. PRV-BaBlu and PRV-D infected the suprachiasmatic nucleus in hypothalamus and intergeniculate leaflet in lateral geniculate nucleus of thalamus. 2. The rate of PRV infection was dependent upon PRV strain. 3. Pre-infected neurons by PRV-D were interfered with the replication of PRV-BaBlu. 4. Dual injection of PRV-D and PRV-BaBlu showed more virulent than the parental strain.

• Geomechanics and Engineering
• /
• v.29 no.4
• /
• pp.391-405
• /
• 2022

A newly proposed grouting simulation method, the sequential diffusion solidification method was introduced into the numerical simulation of combined bi-borehole grouting. The traditional, critical and difficult numerical problem for the temporal and spatial variation simulation of the slurry is solved. Thus, numerical simulation of grouting and blocking of flowing water in karst conduits is realized and the mechanism understanding of the combined bi-borehole technology is promoted. The sensitivity analysis of the influence factors of combined bi-borehole grouting was investigated. Through orthogonal experiment, the influences of proximal and distal slurry properties, the initial flow velocity of the conduit and the proximal and distal slurry injection rate on the blocking efficiency are compared. The velocity variation, pressure variation and slurry deposition phenomenon were monitored, and the flow field characteristics and slurry outflow behavior were analyzed. The interaction mechanism between the proximal and distal slurries in the combined bi-borehole grouting is revealed. The results show that, under the orthogonal experiment conditions, the slurry injection rate has the greatest impact on blocking. With a constant slurry injection rate, the blocking efficiency can be increased by more than 30% when using slurry with weak time-dependent viscosity behavior in the distal borehole and slurry with strong time-dependent viscosity behavior in the proximal borehole respectively. According to the results of numerical simulation, the grouting scheme of "intercept the flow from the proximal borehole by quick-setting slurry, and grout cement slurry from the distal borehole" is put forward and successfully applied to the water inflow treatment project of China Resources Cement (Pingnan) Limestone Mine.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.283-309
• /
• 2021

Achieving profound anesthesia in mandibular molars with irreversible pulpitis is a tedious task. This review aimed at evaluating the success of buccal/lingual infiltrations administered with a primary inferior alveolar nerve block (IANB) injection or as a supplemental injection after the failure of the primary injection in symptomatic and asymptomatic patients with irreversible pulpitis in human mandibular molars. The review question was "What will be the success of primary and supplemental infiltration injection in the endodontic treatment of patients with irreversible pulpitis in human mandibular molars?" We searched electronic databases, including Pubmed, Scopus, and Ebsco host and we did a comprehensive manual search. The review protocol was framed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) checklist. We included clinical studies that evaluated and compared the anesthetic outcomes of primary IANB with primary and/or supplementary infiltration injections. Standard evaluation of the included studies was performed and suitable data and inferences were assessed. Twenty-six studies were included, of which 13 were selected for the meta-analysis. In the forest plot representation of the studies evaluating infiltrations, the combined risk ratio (RR) was 1.88 (95% CI: 1.49, 2.37), in favor of the secondary infiltrations with a statistical heterogeneity of 77%. The forest plot analysis for studies comparing primary IANB + infiltration versus primary IANB alone showed a low heterogeneity (0%). The included studies had similar RRs and the combined RR was 1.84 (95% CI: 1.44, 2.34). These findings suggest that supplemental infiltrations given along with a primary IANB provide a better success rate. L'Abbe plots were generated to measure the statistical heterogeneity among the studies. Trial sequential analysis suggested that the number of patients included in the analysis was adequate. Based on the qualitative and quantitative analyses, we concluded that the infiltration technique, either as a primary injection or as a supplementary injection, given after the failure of primary IANB, increases the overall anesthetic efficacy.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.44-53
• /
• 2009

Numerical design optimization of a fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness by combining a three-dimensional Reynolds-averaged Navier-Stokes analysis with the radial basis neural network method, a well known surrogate modeling technique for optimization. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. Twenty training points are obtained by Latin Hypercube sampling for three design variables. Sequential quadratic programming is used to search for the optimal point from the constructed surrogate. The film-cooling effectiveness has been successfully improved by the optimization with increased value of all design variables as compared to the reference geometry.

• Korean Journal of Veterinary Research
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2013

To develop a live vaccine candidate using an attenuated strain of Salmonella Typhimurium (ST), biochemical properties, plasmid profile, PFGE patterns and pathogenic analysis of the ST isolate were carried out after sequential passage of the ST isolate in porcine neutrophils. By the passage, the ability of the neutrophil-adapted isolate to utilize d-xylose was lost, while the ability of the strain to ferment trehalose was delayed after 2 or more days of the culture. Also, changes including deletion of the gene fragments were observed in PFGE analysis of the neutrophil-adapted isolates. Two plasmids, 105kb and 50kb, were cured in the strain passaged over 15 times in porcine neutrophils. The 50% of lethal dose ($LD_{50}$) of the parent strain was changed from $1{\times}10^5\;LD_{50}$ to $6{\times}10^6\;LD_{50}$ by the passage in intraperitoneal injection of the strains into mice. These results suggested that bacterial genotypic and phenotypic responses might be globally altered depending on the inside environment of neutrophils.

• Clinical and Experimental Reproductive Medicine
• /
• v.44 no.2
• /
• pp.85-89
• /
• 2017

Objective: The aim of this study was to explore the effects of the insemination method on the outcomes of elective blastocyst culture. Methods: We retrospectively analyzed the outcomes of elective blastocyst culture performed between January 2011 and December 2014. Results: There were 2,003 cycles of conventional in vitro fertilization (IVF) and 336 cycles of intracytoplasmic sperm injection (ICSI), including 25,652 and 4,164 embryos that underwent sequential blastocyst culture, respectively. No significant differences were found in the female patients' age, basal follicle-stimulating hormone level, basal luteinizing hormone level, body mass index, number of oocytes, maturity rate, fertilization rate, or good-quality embryo rate. However, the blastocyst formation rate and embryo utilization rate were significantly higher in the conventional IVF group than in the ICSI group (54.70% vs. 50.94% and 51.09% vs. 47.65%, respectively, p<0.05). The implantation/pregnancy rate (IVF, 50.93%; ICSI, 55.10%), miscarriage rate (IVF, 12.57%; ICSI, 16.29%), and live birth rate (IVF, 42.12%; ICSI, 44.08%) were similar (p>0.05). No cycles were canceled due to the formation of no usable blastocysts. Conclusion: Although the fertilization method had no effect on clinical outcomes, the blastocyst formation rate and embryo utilization rate in the ICSI group were significantly lower than those observed in the conventional IVF group. Therefore, more care should be taken when choosing to perform blastocyst culture in ICSI patients.

• The Journal of Korean Physical Therapy
• /
• v.9 no.1
• /
• pp.59-70
• /
• 1997

The ability of neurotropic alpha herpesviruses to replicate within synaptically linked neurons has made these pathogens valuable tools for transneuronal analysis. Recent studies suggest that unique gene products expressed by genetically engineered strains of virus may permit the use of multiple strains in complex tracing paradigms. In the present study we have examined the invasiveness of two genetically engineered strains of the swine pathogen known as pseudorabies virus(PRV). The two strains were isogenic with the attenuated Bartha strain of PRV; in one strain a lacZ reporter gene was inserted into the gC locus (PRV-BaBlu; $4.75\times10^8pfu/ml$) contrained a PRV envelope glycoprotein gene that was absent in PRV-BaBlu. Simultaneous or temporally separated sequential injection of $4\mu\ell$ of each strain into the ventral wall of the stomach produced a predictale course of retrograde synaptic infection. The results were as follows: 1. PRV-BaBlu and PRV-D infected the dorsal motor nucleus of vagus nerve(DMV) and paraventricular nucleus(PVN). 2. Invasion and replication of PRV-D occured at a faster rate than the parental strain or PRV-BaBlu. 3. PRV-D was much more virulent than PRV-BaBlu or the parental strain. 4. Co-injection of PRV-D and PRV-BaBlu produced an infection that was more virulent than that produced by the parental strain (PRV-Bartha), 5. Neurons in DMV were permissive to co-infection with PRV-D and PRV-BaBlu when they were injected simultaneously into the same site. 6. Replication of PRV-BaBlu was compromised by prior infection of the same circuit with PRV-D. 7. Prior infection of neurons with PRV-D maked them resistant to infection with PRV-BaBlu.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.127-135
• /
• 1999

Cryopreservation is able to store the surplus pre-embryos for freezing and furthermore thawing and transfer in a subsequent cycle. Cryopreserving cells which are maintaining their viability are the very complex process. This study has been carried out in order to find the effects of cryopreservation steps, freezing media and embryonic stages on the rates of viability and development of cryopreserved mouse embryos. Female ICR mice ($6{\sim}8$ weeks old) were induced to superovulate by sequential intraperitoneal injection of 5 IU PMSG and 5 IU hCG 48h apart. Mouse embryos were collected according to its developmental stage after the injection of hCG. Embryos were cryopreserved not only by cryoprotectant step (1 step${\sim}$4 step) but also in a variety of media (HTF, IVF medium, D-PBS) and cell stage. The results were as follows: There is no clear advantage in these freezing media of rapid method, but 4 cell and 8 cell of slow method (2, 3, 4 step) have advantage in D-PBS. The development of embryos according to cell stage become greater in 8 cell stage. In the treatment steps of cryopreservation, the development of embryo to blastocyst was similar among rapid method, but the development of 4 cell and 8 cell embryos to blastocyst according to slow method was better than rapid method.