• 제목/요약/키워드: Sequential Construction Effect

검색결과 14건 처리시간 0.025초

시공단계의 영향을 고려한 프리스트레스 콘크리트 다층 구조물의 해석 (Analysis of Multi-Story Prestressed Concrete Structure Considering the Effect of Construction Stage)

  • 전찬기
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권3호
    • /
    • pp.213-223
    • /
    • 2001
  • This paper presents an analytical procedure for the time-dependent analysis of the multi-story prestressed concrete structure under the construction stage. To account for the actual structural behavior, the procedure considers the effects due to the construction interval and the time-dependent losses of prestress at every construction step on the entire structural response. A numerical study is performed to demonstrate the general validity of the approach and to quantitatively evaluate the effects resulted from the time-dependent behaviors during construction. Recommendations and conclusions are developed by comparisons with structural responses using the present and conventional methods of analysis. The comparative results show that both effects of sequential construction and time-dependent prestress losses should be considered for the construction stage analysis.

  • PDF

농촌마을종합개발사업의 협력적 계획과정과 계획효과의 영향구조 분석 (A Study on Affecting Factor-Construction of Collaborative Planning Process and Effect on Comprehensive Rural Village Development Project)

  • 김태구;이성근
    • 농촌계획
    • /
    • 제20권2호
    • /
    • pp.23-43
    • /
    • 2014
  • This study aims to analyze the affecting factors-construction of collaborative planning process and effect on Comprehensive Rural Village Development Project. To this end, targeting the 36 districts which were selected for 2004 Comprehensive Rural Village Development Project and completed their 2010 5-year projects, components of collaborative planning process and planning effect will be drawn and the affecting factors-construction of collaborative planning and effect on Comprehensive Rural Village Development Project will be analyzed below. According to the results of this study, the affecting factors of collaborative planning process of Comprehensive Rural Village Development Project on planning effect, The level of effect of individual component on endogenous variable appeared greatest mostly in the upper groups. In terms of the level of individual component effect, social learning process and interaction among participants affected greatest. The process of Comprehensive Rural Village Development Project is evaluated that it reflected collaborative planning theory of Healey enough. Therefore, in the course of Comprehensive Rural Village Development Project progress, collaborative planning model must pass social learning process and interaction among participants which are the most important components out of collaborative planning process as we saw in the upper groups. And in order to maximize the performance and results of Comprehensive Rural Village Development Project, the following sequential affecting factors model as Figure 7 must be suggested as optimal collaborative planning models of Comprehensive Rural Village Development Project. Based on the results of the study, the policy implication was drawn as follows. First, systematic supplementations in the form of a consultative body are required to perform Comprehensive Rural Village Development Project efficiently. Second, network needs to be built among different participants in Comprehensive Rural Village Development Project process. Third, systematic mechanism is required to improve social learning among different participants. Fourth, systematic rearrangement is required to guarantee the residents' realistic participation in the course of Comprehensive Rural Village Development Project process.

고층건물 기둥의 부등축소량 예측 및 시공오차 보정에 관한 연구 (Prediction and Compensation of Differential Column Shortening in High-Rise Building Structures)

  • 조창휘;송진규;이현호;조석희
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1996년도 가을 학술발표회 논문집
    • /
    • pp.258-266
    • /
    • 1996
  • The purpose of this study is to make a reasonable correction in construction stage through exact prediction of long-time differential column shortening that occurs in the high-rise RC building. For this, a self-developed program adopted PCA code is used to predict differential column shortening with sequential loading process. Using this program, the amount of the different column shortening of Amatapura Apartment in Indonesia is predicted and the effect is analyzed. From the result, the major factor affecting the shortening amount in columns is elastic strain and the effect of shrinkage is very small rather than creep. And maximun differential column shortening is appeared near the middle of the building.

  • PDF

Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts

  • Kim, Dave Dae-Wook;Hennigan, Daniel John;Beavers, Kevin Daniel
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제2권1호
    • /
    • pp.45-56
    • /
    • 2010
  • Polymer composite materials offer high strength and stiffness to weight ratio, corrosion resistance, and total life cost reductions that appeal to the marine industry. The advantages of composite construction have led to their incorporation in U.S. yacht hull structures over 46 meters (150 feet) in length. In order to construct even larger hull structures, higher quality composites with lower cost production techniques need to be developed. In this study, the effect of composite hull fabrication processes on mechanical properties of glass fiber reinforced plastic (GFRP) composites is presented. Fabrication techniques investigated during this study are hand lay-up (HL), vacuum infusion (VI), and hybrid (HL+VI) processes. Mechanical property testing includes: tensile, compressive, and ignition loss sample analysis. Results demonstrate that the vacuum pressure implemented dining composite fabrication has an effect on mechanical properties. The VI processed GFRP yields improved mechanical properties in tension/compression strengths and tensile modulus. The hybrid GFRP composites, however, failed in a sequential manor, due to dissimilar failure modes in the HL and VI processed sides. Fractography analysis was conducted to validate the mechanical property testing results.

다층지반에 근입된 흙막이 벽의 역해석에 관한 연구 (Back Analysis of the Earth Wall in Multi-layered Subgrade)

  • 이승훈;김종민;김수일;장범수
    • 한국지반공학회논문집
    • /
    • 제18권1호
    • /
    • pp.71-78
    • /
    • 2002
  • 본 연구에서는 다층지반에 근입된 흙막이 벽의 단계별 계측변위로부터 각 층의 지반물성을 추정하고 이로부터 차기단계의 거동을 예측하기 위한 역해석 기법을 제안하였다. 지반이 다수의 층으로 구성되어 있을 경우 찾아야 할 대상변수가 많아지게 되며, 대상변수가 많아질수록 역해석에 상당한 무리가 따르게 된다. 이러한 층별 지반물성을 효율적으로 추정하기 위하여 최하단층부터 순차적으로 대상변수들을 찾아가는 방법을 이용하였다. 역해석은 상당량의 반복계산이 필요하기 때문에 정해석 방법으로는 해석시간이 짧고 시공단계 별 해석이 가능한 탄소성보법을 사용하였다. 역해석 대상변수는 탄소성 하중-변위 곡선의 구성요소인 지반반력계수와 수평토압계수들을 취하였으며, 목적함수는 이상변위에 의한 오차를 최소화시키기 위하여 단계별 계측변위 증분과 해석변위 증분의 차이로 구성하였다. 목적함수를 최소화 시키는 대상변수들을 찾기 위한 최적화 수법으로는 제약순차선형계획 법을 이용하였다. 본 연구를 통하여 제안된 방법을 수치해석자료 및 현장계측자료를 이용하여 검증하였다.

Modeling the Effect of Water, Excavation Sequence and Reinforcement on the Response of Tunnels

  • Kim, Yong-Il
    • 한국지반공학회논문집
    • /
    • 제15권3호
    • /
    • pp.161-176
    • /
    • 1999
  • 본 논문에서는 기존의 불연속 변형 해석(DDA) 방법에 대한 세가지 방향의 새로운 개선 방법들이 제시되었다. 이 개선 방법들은 암반 균열에서 암석 블록과 지하수 흐름의 수리-역학적 커플링, 연속적인 하중 재하 또는 제하, 그리고 록볼트, 숏크리트와 콘크리트 라이닝에 의한 보강으로 구성되었다. Shi (1988)와 Lin (1995)에 의한 기존 DDA 프로.그램은 이 방법들에 의하여 추가로 개선되었으며, 이 새로운 DDA프로그램에 대한 몇 가지 적용예들이 제시되었다. 또한, 경부고속철도 공사의 일부인 운주 터널의 지하굴착에 대한 시뮬레이션을 통하여 절리를 통한 지하수의 흐름, 굴착순서, 그리고 록볼트와 숏크리트에 의한 보강이 터널안정에 미치는 영향을 연구하였다. 그 결과 절리를 통한 지하수의 흐름과 부적절한 굴착순서는 터널의 안정성에 악영향을 미치나, 한편 록볼트와 숏크리트에 의한 보강은 터널을 안정화 시킨다는 사실을 밝혀냈었다. 그 결과 세가지 개선방법이 추가된 DDA프로그램은 지하구조물 설계에 있어서 유용한 해석방법으로 사용될 수 있다는 사실을 보여주었다.

  • PDF

플라이애쉬의 차수 및 오염물 차단 능력 평가 연구 (Evaluation of Fly Ash as an Alternative to Clay Liner Material in Landfills)

  • 정문경;현재혁;김승현
    • 한국지반공학회지:지반
    • /
    • 제14권5호
    • /
    • pp.191-204
    • /
    • 1998
  • 플라이 애쉬의 폐기물 매립장 대용 차수재로서의 적용성을 평가하기 위하여 실내 실험과 모델 연구를 실시하였다. 실제의 매립장 차수층이 불포화 상태일 수 있는 점을 고려하여, 대용 차수재와 기존의 점토 차수재에서의 포화 및 불포화 상태에서의 물 흐름 특성을 비교하였다. 차수층에서의 오염물 이동 특성을 연구하기 위하여 오염물을 이용한 회분실험을 실시하였으며, 이때 폐놀을 대표 오염물질로 사용하였다. 모델은 물질 수지에 기초하였으며, 유한 차분법과 predictor-corrector법을 이용한 수치 해법으로 풀었고, 연립 미분방정식을 다루는테는 sequential method를 이용했다. 연구 결과 대용 차수재는 기존 차수재보다 폐놀 차단 능력이 더 크고 또 불포화대에서의 차수능력도 더 크다는 것을 알 수 있었다. 또한, 본 연구에서 고려된 흐름조건에서는 차수층을 포화대로 해석할 경우 통과하는 물의 양이 약간 과소평가되고 폐놀 차단 능력은 매우 과소평가됨을 알 수 있었다.

  • PDF

다단계 분할기법에 의한 평면트러스의 단면치수 및 형상 최적화 (The size and shape optimization of plane trusses using the multi-levels method)

  • 편해완;오규락;강문영
    • 한국강구조학회 논문집
    • /
    • 제12권5호통권48호
    • /
    • pp.515-525
    • /
    • 2000
  • 본 연구의 목적은 평면 트러스의 단면치수 및 형 상 최적화 알고리즘을 개발 하는 것이다. 본 연구에 적용된 최적화 기법은 무제약 축차선형화기법(SUMT)의 extended penalty method와 다변수(多變數)를 가지는 직접탐사법인 Hooke & Jeeves method이다. 상기(上記) 언급된 두 방법은 단면최적화와 형상최적화 과정의 각 단계에서 반복적 다 최적설계 과정에서 최종의 최적값이 구해질 때까지 단면최적화와 형상최적화 과정이 반복적으로 상호작용하게 된다. 트러스의 형상최적화에 관한 기존의 연구문헌에서는 최적화의 설계변수로서 부재의 단면적과 절점좌표를 사용하였다. 이렇게 할 경우, 압축재의 좌굴특성을 제대로 반영하기 어려우므로 한정된 조건으로 좌굴특성을 부여하게 되어 보다 실제적인 최적설계에 많은 제약을 가져오게 되므로 본 연구에서는 부재의 실제치수와 절점좌표를 최적화의 설계 변수로 취하게 되므로 부재치수의 변화에 따른 좌굴특성의 변화를 최대한 반영할 수 있다.

  • PDF

불연속 변형 해석법에 의한 굴착순서 및 지반보강이 터널의 거동에 미치는 영향 모델링 (Modeling the Effect of Excavation Sequence and Reinforcement on the Response of Tunnels with Discontinuous Deformation Analysis Method)

  • 김용일;김영근
    • 터널과지하공간
    • /
    • 제10권1호
    • /
    • pp.25-32
    • /
    • 2000
  • 본 논문에서는 기존의 불연속 변형 해석(DDA)방법에 대한 두 가지 방향의 새로운 개선 방법들이 제시되었다. 이 개선 방법들은 암반에 연속적인 하중 재하 또는 제하, 그리고 록볼트, 숏크리트와 콘크리트 가이닝에 의한 보강으로 구성되었다. 이 방법들에 의하여 추가로 개선된 새로운 DDA프로그램에 대한 몇 가지 적용 예들이 제시되었다. 또한, 경부고속철도 공사의 일부인 운주 터널의 지하굴착에 대한 시뮬레이션을 통하여 굴착순서, 그리고 록볼트와 숏코리트에 의한 보강이 터널안정에 미치는 영향을 연구하였다. 그 결과 부적절한굴착순서는 터널의 안정성에 악영향을 미치나, 록볼트와 숏크리트에 의한 보강은 터널을 안정화 시킨다는 사실을 밝혀내었다. 그 결과 두 가지 개선방법이 추가된 DDA프로그램은 지하구조물 설계에 있어서 유용한 해석방법으로 사용될 수 있다는 사실을 보여주었다. 특히 시공단계(굴착, 보강)를 보다 사실적으로 시뮬레이션 할 수 있다.

  • PDF

백운 폐광산의 방치된 폐석으로 인한 주변 수계의 환경적 영향 (Environmental effects from Natural Waters Contaminated with Acid Mine Drainage in the Abandoned Backun Mine Area)

  • 전서령;정재일;김대현
    • 자원환경지질
    • /
    • 제35권4호
    • /
    • pp.325-337
    • /
    • 2002
  • 백운 폐광산 주변에 방치된 폐석으로 인한 하천수 및 하상퇴적물의 중금속오염정도를 알아보고자 하였다. 광산활동과 관련되어 발생하는 주변 하천수의 Al 및 Pb, Zn, Cu, Cd, Mn, Fe 등의 중금속 및 기타 이온의 부화현상은 하천수의 TDS를 높이며 또한, 수질을 악화시키는 요인이 된다. 백운광산 주변의 하천수는 Ca와 SO$_4$가 주를 이루는 Ca-SO$_4$형을 보이며, 부분적으로 황화광물의 화학적 풍화로 인한 중금속부화현상을 보인다. 광산을 경유해서 흐르는 하천수는 알카리 및 알카리 토류원소에 의한 중화작용의 영향으로 pH는 6.S-7.1의 약산성내지 중성을 띤다 폐갱구로부터 홀러나오는 갱내수 또한 약산성 내지 중성을 띠며, 광산내의 광석과 맥석광물과의 화학적 풍화로 인해 높은 원소함량을 보인다. 백운 폐광산 주변의 하천수는 갱내수가 유입되는 지역에서 높은 농도를 보이다 하류로 갈수록 농도가 급격히 낮아진다. 이온농도가 낮아지고 pH가 중성을 띠는 것은 자연적으로 오염을 조정해주는 희석 및 침전, 흡착 등으로 인한 완충작용의 결과이다. 토양내에서 중금속의 이동성이나 생물학적 이용능력을 알아보기 위하여 단계별 추출법을 이용하여 하상퇴적물에서 Cd, Cu, Zn, Pb의 존재형태를 5가지 단계로 분류하였다: 이온교환형태, 탄산염형태, 철-망간 산화물형태, 유기물형태, 잔류상형태. 대부분의 퇴적물에서 Cu(21-92%) 및 Zn(28-89%), Pb(23-94%)는 잔류상형태가 우세하였으며, Cd는 퇴적물에서 다른 원소에 비해 낮은 농도(2.7-52.8 mg/kg)를 보여주었으나 대부분 불안정한 형태(68-97%)가 우세하였다. 상류 퇴적물에서는 폐석으로 인해 Pb의 농도가 높게 나타나며, 하류 퇴적물은 Zn이 높은 농도를 보여, Zn 과 불안정한 형태가 우세한 Cd이 이동성이 높은 원소임을 알 수 있었다.thing construction. The presentation coverages and relative difficulties of textbooks were, however, diverse. It is somewhat noticeable that, while fewer professors majoring in clothing construction participated in writing, generally more pages were allocated to clothing construction than other areas. While presentations on anthropometrics method, construction theory, draft theory, usage of sewing machine and fitting theory were insufficient most textbooks were dealing with drafting of basic slopers and sewing procedure, etc. Making-up techniques on the apparels items such as Korean traditional men's pants, pajamas, shirt vest skirt, pants, apron and Korean pouch were handled closely in each textbook.different from the one in the l980s worn by the demonstrators of popular movements and democratic movements, and it emerged as a new symbol with the characteristics of cultural movement like community consciousness and nature affiliation.