• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.347-352
• /
• 2007

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the previous study, we proposed a two-level condensation scheme (TLCS) for the construction of a reduced system. In the first step, the selection of candidate elements by energy estimation, Rayleigh quotient, through Ritz vector calculation. In the second step, the primary degrees of freedom are selected by the sequential elimination method from the degrees of freedom connected to the candidate elements in the first step. In the present study, we propose TLCS combined with iterative improved reduced system (IIRS) to increase accuracy of the higher modes in the intermediate range. Also, it is possible to control the accuracy of the eigenvalues and eigenmodes of the reduced system. Finally, numerical examples demonstrate the performance of the proposed method.

• The Plant Pathology Journal
• /
• v.22 no.1
• /
• pp.21-27
• /
• 2006

We immunized BALB/c mice with purified Cucumber green mottle mosaic virus isolate HY1 (CGMMV-HY1). Through the selection of positive clones that were grown on the HAT medium, four sensitive monoclonal clones (CG99-01, CG99-02, CG99-03, and CG99-04) were selected from 500 Hypoxanthine-guanine phosphoribosyltransferase positive hybridoma cells. Four sensitive clones of CGMMV-HYI were determined as IgM type of the subclass of mouse immunoglobulins Ig group. The titer of monoclonal antiserum against CGMMVHY1 was estimated 1:12,800 by the indirect ELISA. Although monoclonal antibodies (MAbs) from CG99-01 and from CG99-04 cross-reacted with Zucchini green mottle mosaic virus and Kyuri green mottle mosaic virus, MAb from the cell line CG99-03 was highly specific to CGMMV. No MAbs cross-reacted with Cucumber mosaic virus-Fny. Only CG99-04 reacted with Pepper mild mottle virus weakly and CG99-02 reacted with both CGMMV and KGMMV. CGMMV was detected from the rind of watermelon fruit by DAS-ELISA of CGMMV-HY1, but not from the flesh of watermelon. Average seed transmission rate of CGMMV in watermelon was $24\%$ from symptomatic watermelon collected from 5 regions of Gyeongnam province. CGMMV was detected by DAS-ELISA with specific MAb of CGMMVHY1 periodically from root stock, during the sequential process for nursery seedling in Haman. Necrotic spots on cotyledons of root stock seedling progressed to reveal the typical symptomatology on the primary leaves of scion upon grafting. Here, we have established MAb based ELISA system, which could accurately detect CGMMV from watermelon seeds, nursery seedlings, transplants and field samples from greenhouse or open out door field as well.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.25-36
• /
• 2004

This paper proposes and measures the performance of a distributed EIT (Electrical Impedance Tomography) image reconstruction algorithm which has a master-slave structure. The image construction is a computation based application of which the execute time is proportional to the cube of the unknowns. After receiving a specific frame from the master, each computing node extracts the basic elements by executing the first iteration of Kalman Filter in parallel. Then the master merges the basic element lists into one group and then performs the sequential iterations with the reduced number of unknowns. Every computing node has MATLAB functions as well as extended library implemented for the exchange of MATLAB data structure. The master implements another libraries such as threaded multiplication, partitioned inverse, and fast Jacobian to improve the speed of the serial execution part. The parallel library reduces the reconstruction time of image visualization about by half, while the distributed grouping scheme further reduces by about 12 times for the given target object when there are 4 computing nodes.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.512-517
• /
• 2006

A reliable linear translation system was constructed. The system has six piezo legs, attached to a main body, holding a hexagonal sapphire rod. The sapphire rod moves either forward or backward with the sequential motion of the piezo legs, driven by characteristic electric voltage waves. The translational system was tested in vertical direction. The speed of the sapphire rod was turned out to be constant during several mm travel. The slowest upward speed was measured to be ${\sim}1.7{\times}10^{-6}m/s$, yielding ${\sim}28.3nm/step$, while the slowest upward speed was ${\sim}3.7{\times}10^{-6}m/s$, with ${\sim}61.7nm/step$, due to gravitational force. The velocity increases linearly, as the amplitude of the voltage waves increases. The linear translation system will be used as a coarse approach part for a scanning tunneling microscope.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.244-251
• /
• 2003

A two-dimensional BEM code, $FRACOD^{2D}$, was applied to simulate fracture initiation and propagation processes in a rock pillar during an in situ heater test of a rock pillar planned at the $\"{A}sp\"{o}$ Underground Rock laboratory of SKB, in Southern Sweden. To take the advantage of conventional BEM for simulating fracturing processes, but without efforts for domain integral transformation, a hybrid approach is developed to simulate the fracturing processes in rock pillar under coupled thermo-mechanical loading. The code FRACOD was used for simulating the fracture initiation and propagation processes with its boundary tractions reflecting the effects of the initial and redistributed thermomechanical stresses in the domain of interest at multiple excavation and heating steps were produced by a special algorithm of stress inversion, based on resultant thermo-mechanical stress fields at each excavation and heat loading step by a FEM code without considering fracturing processes. This hybrid approach can take the advantages of both types of numerical methods and avoids their shortcomings for fracturing process simulation and domain effects, respectively. In this paper, we present the hybrid approach for the stress, displacements, and fracturing processes at sequential excavation and heating steps of the in situ heater test as a predictive modelling, the formulation of the fracturing models and the predictive results. Two sections of borehole depth, 0.5 m and 1.5 m below the tunnel floor are considered. The pillar area is modelled with the FRACOD and the stress field produced by excavation and heating is transferred with corresponding boundary stresses. From the modelling results, the degree of fracturing and damage are evaluated for 120 days of heating. Dominated shear fracturing in the vicinity of the central pillar was observed from the models at both sections, but spalled area appears to be limited. Based on the modelling results, a sensitivity study for the effect of pre-existing fractures in the vicinity of the holes is also conducted, and the initiation and evolution of EDZ around the deposition holes are investigated using this particular numerical technique.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.1-18
• /
• 2007

This study is about an arrangement method of trapezoidal pre-cast segment lining that can be applied in shield tunnel construction. Trapezoidal segment lining is formed by assembling tapered pre-cast concrete segments taking advantage of the tapered shape of pre-cast segments upon delivery on site. By calculating tapering of the segments manufactured in single type and rotating the segments when putting them together, a variety of tunnel alignments can be arranged in the most efficient way. Once the design criteria and tunnel alignment (straight or curved) is analyzed, the sequence of assembling trapezoidal segments in compliance with tunnel alignment will be computed. On site an operator can utilize the softwareto automatically determine sequential arrangement of trapezoidal segments. When the actual arrangement of segmental lining is different from the computed output, the operator can input the actually measured values to coincide the computerized calculation with the real status of assembly. Then the adjustment will be the basis of subsequent arrangement of segments, thus the continuity of work can be guaranteed.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.591-600
• /
• 2018

The probabilistic characterization of wind field characteristics is a significant task for fatigue reliability assessment of long-span railway bridges in wind-prone regions. In consideration of the effect of wind direction, the stochastic properties of wind field should be represented by a bivariate statistical model of wind speed and direction. This paper presents the construction of the bivariate model of wind speed and direction at the site of a railway arch bridge by use of the long-term structural health monitoring (SHM) data. The wind characteristics are derived by analyzing the real-time wind monitoring data, such as the mean wind speed and direction, turbulence intensity, turbulence integral scale, and power spectral density. A sequential quadratic programming (SQP) algorithm-based finite mixture modeling method is proposed to formulate the joint distribution model of wind speed and direction. For the probability density function (PDF) of wind speed, a double-parameter Weibull distribution function is utilized, and a von Mises distribution function is applied to represent the PDF of wind direction. The SQP algorithm with multi-start points is used to estimate the parameters in the bivariate model, namely Weibull-von Mises mixture model. One-year wind monitoring data are selected to validate the effectiveness of the proposed modeling method. The optimal model is jointly evaluated by the Bayesian information criterion (BIC) and coefficient of determination, $R^2$. The obtained results indicate that the proposed SQP algorithm-based finite mixture modeling method can effectively establish the bivariate model of wind speed and direction. The established bivariate model of wind speed and direction will facilitate the wind-induced fatigue reliability assessment of long-span bridges.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.129-140
• /
• 2013

This study reviewed different results according to the selection of viewpoints and considerations of the neighborhood in the analysis of view to regulate the height of buildings. To do this, 4 cases were set according to the analytical methodology and a GIS simulation was performed. Characteristics of each methodology were compared and analyzed by simulated values with ANOVA(analysis of variance) and post-hoc analysis. First, the method using moving viewpoints was found to be appropriate for the regulation of building height as it could reflect basic characteristics of landscape which was sequential and it did not show big difference in analysis result according to situational setting. Second, the method using grid viewpoints showed a problem that viewpoints at left and right sides viewed ridges of other mountains than the background mountains of the target land. Additionally, the simulation method that induces three-dimensional cross-sections between multiple sight-surface and virtual construction points created at viewpoints used in this study was found to be useful in the simulation review with various settings as it induced the marginal height of the spot quantitatively.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.5
• /
• pp.5-11
• /
• 2015

The double sheeted permeable reactive barrier containing two different reactive materials can be applied to remediate the groundwater contaminated by nutrients and heavy metals. In this study, in order to evaluate the removal efficiency of contaminants including ammonium, cadmium and phosphate by double layered permeable reactive barrier containing zeolite and steelmaking slag, column tests were performed. In addition, nonequilibrium reaction in column tests was analyzed by two-site nonequilibrium advection-dispersion model. Column test results showed that zeolite is effective for removal of ammonium, while steelmaking slag is effective for removal of phosphate and cadmium. The sequential reaction of zeolite and steelmaking slag gave the better removal efficiency for ammonium.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.229-240
• /
• 2014

Rain events are extremely important for phosphorus (P) dynamics in rivers since large portions of annual river P loads can be transported in particulate forms during only a few major events. Despite their importance, a precise estimation of P contribution in river sediments after rainy seasons has rarely been reported. This study estimated the longitudinal variation in the concentrations of different inorganic P fractions in bed sediments of the South Han River over a rainy season, through using the sequential extraction method. Non-apatite P was the dominant form, representing more than 60% of total inorganic P (TIP) content in sediments. Although no significant variation of TIP contents was observed, the proportion of bioavailable P in TIP pools decreased after the rainy season. The concentrations of individual inorganic P fractions ($NH_4Cl-P$, $NH_4F-P$, NaOH-P, and $H_2SO_4-P$) were significantly different across sites and after the rainy season (p < 0.05, two-way ANOVA). $NH_4F-P$ and NaOH-P concentrations in sediments increased in a downstream direction. After the rainy season, $NH_4Cl-P$ concentrations in sediments decreased whereas $NH_4F-P$ and $H_2SO_4-P$ concentrations increased. The redistribution of individual P fractions in sediments observed after rainy seasons were possibly due to the changing contribution of various sources of runoff and the variation in flow related particle size. Current estimation of P in bed sediments of the South Han River suggests a lower potential of internal P loading from sediments after the rainy season.