• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.181-187
• /
• 2015

납축전지 활물질 제작 공정 중 숙성공정에서 온도 제어를 통해 활물질 결정 크기를 제어할 수 있고, 생성된 활물질에 따라 초기 성능 향상, 내구성능 향상 효과를 얻을 수 있었다. 숙성반응 후 생성된 활물 중 3BS는 초기성능에는 유리 하였고, 4BS의 경우 초기 성능은 불리하였으나 내구 성능이 3BS활물질에 비해 48% 향상 되었다. 자동차용 납축전지를 ISG시스템이 적용된 자동차에 사용하기 위해 평가하는 DOD17.5% 수명시험 평가 결과, 일반 자동차 시동용으로 널리 사용하고 있는 Flooded 납축전는 적합하지 않은 것으로 확인 되었고, AGM 납축전지가 적합한 것으로 확인되었다. 그리고 3BS 활물질을 적용한 AGM 납축전지에 비해 4BS 활물질을 적용한 AGM 납축전지가 내구력이 우수하여 ISG 시스템에 적용된 자동차에 적합한 것으로 확인 되었다.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.102-107
• /
• 2013

In this paper, the performance analysis for evaporation capacity, total work and efficiency of the ocean thermal energy conversion(OTEC) power system using mixed refrigerant(R32,R152a) is conducted to find the effect of hot wasted water on OTEC power system. The system in this study is applied with two stage turbine, regenerator, cooler and separator on Organic Rankine Cycle. The commercial program HYSYS is used for the performance analysis. The main results were summarized as follows : The efficiency of the OTEC power cycle has a largely effect on the evaporation capacity and total work. As increasing temperature of heat source water, evaporator's capacity is decreased but total work increase. Otherwise, using hot wasted water bring effects not only increasing system efficiency but also declining evaporator's capacity. Thus With a thorough grasp of these effect, it is necessary to find way to use hot wasted water emitted by power plant and so on.

• 대한환경공학회지
• /
• 제34권5호
• /
• pp.295-303
• /
• 2012

본 연구는 DEPHANOX 공정내 분리조에 Al(III) ($Al_2(SO_4)_3{\cdot}17H_2O$)를 주입하여 유출수의 T-P 농도를 0.2 mg/L 이하로 유지하기 위한 주입량을 도출하고 Al(III) 첨가에 따른 질소 및 인 제거 효율을 평가하였다. 반응조 내에 Al(III)을 5, 10, 15 mg/L주입하여도 pH와 알칼리도 저감에 대한 영향은 나타나지 않았으며 반응조 내의 pH는 7~8 사이로 유지하였다. 응집제의 주입량이 증가할수록 유기물과 T-N 제거효율은 감소하였으나, T-P 제거효율은 주입량이 5, 10, 15 mg/L로 증가할수록 76.28, 84.02, 94.66% 증가하였다. Al(III)주입량 15 mg/L에서 유출수의 T-P 농도는 0.17 mg/L로 관찰되어 유출수의 T-P 농도를 0.2 mg/L 이하로 유지하기 위한 Al(III)의 주입량은 최소 15 mg/L 이상임을 확인하였다.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.196-202
• /
• 2015

Human blood consists of 55% of plasma and 45% of blood cells such as white blood cell (WBC) and red blood cell (RBC). In plasma, there are many kinds of promising biomarkers, which can be used for the diagnosis of various diseases and biological analysis. For diagnostic tools such as a lab-on-a-chip (LOC), blood plasma separation is a fundamental step for accomplishing a high performance in the detection of a disease. Highly efficient separators can increase the sensitivity and selectivity of biosensors and reduce diagnostic time. In order to achieve a higher yield in blood plasma separation, we propose a novel fluid wing structure that is optimized by COMSOL simulations by varying the fluidic channel width and the angle of the bifurcation. The fluid wing structure is inspired by the inertial particle separator system in helicopters where sand particles are prevented from following the air flow to an engine. The structure is ameliorated in order to satisfy biological and fluidic requirements at the micro scale to achieve high plasma yield and separation efficiency. In this study, we fabricated the fluid wing structure for the efficient microfluidic blood plasma separation. The high plasma yield of 67% is achieved with a channel width of $20{\mu}m$ in the fabricated fluidic chip and the result was not affected by the angle of the bifurcation.

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 전지기술 심포지움
• /
• pp.7-27
• /
• 1998

In order to design capacity of lithium ion battery, some calculations were carried out based on the characteristics of materials by the given battery shape and dimension. The principle of design was built by the interpretation of the correlation of material, electrochemical and battery factors. Parameters of materials are fundamental physical properties of constituent such as cathode. separator, anode, current collectors and electrolyte. Electrochemical factor includes potential pattern as a function of specific capacity, specific discharge capacity(or initial irreversible specific capacity or Ah efficiency) as a function of specific charge capacity and material balancing. Parameters of battery are dimension, construction hardware and performance. Battery capacity was simulated for a lithium cobalt dioxide as cathode and a hard carbon as anode to achieve 1100 mAh for the charge limit voltage of 4.2V, the weight ratio(+/-) of 2.4 and ICR18650. A fabricated test cell (ICR18650) which have weight ratio(+/-) of 2.4 discharged to 1093 mAh for the charge limit voltage of 4.2V. The sequential discharge capacity show good correspondence with designed capacity.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.305-309
• /
• 2005

고액분리기란 고형물을 함유한 폐수로부터 고체와 액체를 분리하는 장치로서, 수산가공폐기물, 축산분뇨 등과 같은 폐수의 효가적인 처리를 위해서는 고형물을 걸러내는 전처리 공정이 반드시 필요하다. 현재 많이 활용하고 있는 고액분리장치로는 경사스크린식, 드럼스크린식 등이 있으며, 이러한 방식은 고액분리 효율이 낮고 빈번히 발생하는 스크린의 눈막힘 현상 때문에 분리도중에 역세청 등의 부가적인 과정이 필요하다. 본 논문에서는 기존의 진동 고액분리장치에서의 주된 문제점인 스크린의 눈막힘 현상을 해소하고, 최적의 고액분리효율을 얻기 위한 스크린구조, 가진구조와 방법, 진동주파수설정 등을 연구하고, 마이크로프로세서를 이용한 고액분리 자동화장치를 개발하고자 하였다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.141-145
• /
• 2005

DME (Di-Methyl Ether) is a new clean fuel and an environmental-friendly energy resource, also is recently increasing with an alternative interest because of the industrial use. DME has been shown to have excellent properties as a diesel fuel giving emission level better than ULEV standard. So it has been attracting considerable as an alternative diesel fuel. In this study, we carried out simulation of separation and purification process of demo plant for 101on per day DME production, which cause the effect that is important in productivity, from operation results of pilot plant for 50kg per day DME production. The liquefied stream, which was separated by gas-liquid separator after DME reactor, includes $CO_2$, DME, Methanol and $H_2O$. We established three distillation columns for separation and purification of the stream. $CO_2$ was extracted from the stream by first distillation column, DME was extracted by second column and Methanol was extracted by third column. We investigated and analyzed the effect which the actual operation variables cause in efficiency of process and optimized process, finally we got the DME of purity $100\%$.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.365-371
• /
• 2016

Cell performance of the Zn-Br redox flow battery (ZBRFB) using two different type's membrane (Nafion117 and SF-600) was evaluated at $20mA/cm^2$ of current density in 1M (mol/L) $ZnBr_2$ + 2M KCl + 0.3M EMPBr(1-ethyl-1-methyl pyrrolidinium bromide) electrolyte. The average energy efficiencies of ZBRFB were 74.9% and 74.7% for Nafion117 and SF-600, respectively. The electrolyte added the 1-ethyl-3-methylimidazolium dicyanamide (EMICA) as an additive was tested for the electrolyte in ZBRFB using SF-600 at $30mA/cm^2$ of current density. An average energy efficiency of the ZBRFB was 74.5% and 77.4% for the electrolyte non-added EMICA and added 1wt% of EMICA, respectively. ZBRFB using the electrolyte added EMICA was showed the higher performance than that using the electrolyte non-added EMICA.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.443-448
• /
• 2019

The present study was conducted to compare the voltage generation in two-chamber microbial fuel cells (MFCs) with a biocathode where nitrate and oxygen are used as a terminal electron acceptors (TEA) and to investigate the nitrogen removal and the electrochemical characteristics depending on the separators of the MFCs for denitrification. The maximum power density in a biocathode MFC using an anion exchange membrane (AEM) was approximately 40% lower with the use of nitrate as a TEA than when using oxygen. The MFC for denitrification using an AEM allows acetate ($CH_3COO^-$) as a substrate and nitrate ($NO_3{^-}$) as a TEA to be transported to the opposite sides of the chamber through the AEM. Therefore, heterotrophic denitrification and electrochemical denitrification occurred simultaneously at the anode and the cathode, resulting in a higher COD and nitrate removal rate and a lower maximum power density. The MFC for the denitrification using a cation exchange membrane (CEM) does not allow the transport of acetate and nitrate. Therefore, as oxidation of organics and electrochemical denitrification occurred at the anode and at the cathode, respectively, the MFC using a CEM showed a higher coulomb efficiency, a lower COD and nitrate removal rate in comparison with the MFC using an AEM.