• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.867-874
• /
• 2015

Separation of cesium chloride (CsCl) and strontium chloride ($SrCl_2$) from the lithium chloride-potassium chloride (LiCl-KCl) salt was studied using a melt crystallization process similar to the reverse vertical Bridgeman growth technique. A ternary $SrCl_2-LiCl-KCl$ salt was explored at similar growth rates (1.8-5 mm/h) and compared with CsCl ternary results to identify similarities. Quaternary experiments were also conducted and compared with the ternary cases to identify trends and possible limitations to the separations process. In the ternary case, as much as 68% of the total salt could be recycled per batch process. In the quaternary experiments, separation of Cs and Sr was nearly identical at the slower rates; however, as the growth rate increased, $SrCl_2$ separated more easily than CsCl. The quaternary results show less separation and rate dependence than in both ternary cases. As an estimated result, only 51% of the total salt could be recycled per batch. Furthermore, two models have been explored to further understand the growth process and separation. A comparison of the experimental and modeling results reveals that the nonmixed model fits reasonably well with the ternary and quaternary data sets. A dimensional analysis was performed and a correlation was identified to semipredict the segregation coefficient.

• Membrane Journal
• /
• v.30 no.6
• /
• pp.359-372
• /
• 2020

Compared to other oil/water separation methods, oil/water separation membranes have low energy costs and higher performance levels. Superhydrophilicity and underwater superoleophobicity are factors that are most vital in developing effective oil/water separation membrane. In addition, antifouling property and biodegradability are also factors that have to be considered in developing the membranes. In this review, studies which have enhanced the oil/water separation efficiency by modifying the chemistry and morphology of the surface of the membrane are discussed.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.119-124
• /
• 2021

Isolation and separation of biological nanoparticles, such as cells and extracellular vesicles, are important techniques for their characterization. Dielectrophoresis (DEP) based on microfluidic chips is an effective method to isolate and separate the nanoparticles. However, the electrodes of the DEP chips are electrolyzed by the electrical signals applied to the nanoparticles. Thus, the isolation/separation efficiency of the nanoparticles is reduced considerably. Through this study, we developed a microfluidic DEP chip for reliable isolation/ separation of nanoparticles and developed a passivation technique for the protection of the DEP chip electrodes. The electrode passivation process was designed using a hydrogel and the stability of the hydrogel passivation layer was verified. The fabricated DEP chip and the proposed passivation technique were used for the collection and dispersion of the fluorescent polystyrene nanoparticles. The proposed chip and the technique for isolation and separation of nanoparticles can be leveraged in various bioelectronic applications.

• Archives of Plastic Surgery
• /
• v.48 no.4
• /
• pp.378-383
• /
• 2021

Conjoined twins are rare, and each set of conjoined twins has a unique conjoined anatomy. It is necessary to perform separation to increase the chance of patient survival. Tissue expansion is an advanced technique for providing sufficient soft tissue and skin for wound closure. We report the successful application of rapid tissue expansion in 10-month-old xipho-omphalopagus conjoined twins in Vietnam. A tissue expander was placed on the anterior body between the sternum and umbilicus with a baseline of 70 mL sterile saline (0.9% NaCl). The first injection into the tissue expander began on the 6th day after expander insertion, and injections continued every 2 days with approximately 30-70 mL per injection according to the expansion of the skin. The expander reached 335 mL after six injections and within 10 days. In order to prepare for surgical separation, expansion was completed on the 15th day after insertion. The expanded skin area was estimated to be 180 cm², which was sufficient to cover both patients' skin deficiencies. The twins presented for surgical separation 6 days following the completion of tissue expansion. Both babies were discharged in good health 1 month after separation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.284-287
• /
• 2008

In this paper, a new Twisted Nematic (TN) transflective liquid crystal display configuration with single cell gap for both transmissive and reflective mode and without sub-pixel separation is proposed. The Transmittance vs. Voltage Curve (TVC) and Reflectance vs. Voltage Curve (RVC) are matched.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.5-109
• /
• 2001

The separation of scintillation phenomena concurrent with rain attenuation phenomena can be accomplished by filtering. Based on the analysis of satellite signal fading during rain, scintillation and rain attenuation phenomena are examined and extracting from raw data by using adaptive IIR high-pass filter and adaptive IIR low-pass filter. Adaptive IIR filter are designed by using the algorithm of Least Mean p-Power (LMP) Error Criterion which have been modified by Quantizing Gradient technique. This algorithm reduces amount of multiplication computational equal to the length of input data. It is prove here that the convergence speed, variance, bias independence on p values. For this application, p=1 is chosen. The procedure of application ...

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.41-52
• /
• 1994

The importance of separation comes from demands on study for exact effect of synthetic drugs and the reactivity of enantiomer in biological system. Racemization rate was measured under the influence of heat, acid, UV-light, enzyme(trypsin) and 6N-HCl at $105^{\circ}C$ on alanine, threonine, isoleucine, lecuine, aspartic acid, methionine, glutamic acid, tyrosine. The method for the identification of overlapped amino acids with GC was developed from the close study of fragmentation pattern with mass spectrometry. With cyclodextrin bonded phase by HPLC, the separation of dansyl amino acid was tested for compartison.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.244-253
• /
• 2007

This research investigated the effect of a photocatalytic reaction on nanofiltration(NF) membrane fouling by natural organic matter(NOM). The photocatalytic degradation was very effective for destruction and transformation of NOM and was carried out by titanium dioxide($TiO_2$) and $TiO_2$-immobilized bead as a photocatalyst. In order to compare their phtocatalytic properties, the photocatalytic degradation of humic acid in the presence of calcium ion was used as a model reaction. After the photocatalytic degradation the membrane fouling was dramatically decreased.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.141-145
• /
• 2005

DME (Di-Methyl Ether) is a new clean fuel and an environmental-friendly energy resource, also is recently increasing with an alternative interest because of the industrial use. DME has been shown to have excellent properties as a diesel fuel giving emission level better than ULEV standard. So it has been attracting considerable as an alternative diesel fuel. In this study, we carried out simulation of separation and purification process of demo plant for 101on per day DME production, which cause the effect that is important in productivity, from operation results of pilot plant for 50kg per day DME production. The liquefied stream, which was separated by gas-liquid separator after DME reactor, includes $CO_2$, DME, Methanol and $H_2O$. We established three distillation columns for separation and purification of the stream. $CO_2$ was extracted from the stream by first distillation column, DME was extracted by second column and Methanol was extracted by third column. We investigated and analyzed the effect which the actual operation variables cause in efficiency of process and optimized process, finally we got the DME of purity $100\%$.

• Geomechanics and Engineering
• /
• v.5 no.3
• /
• pp.223-240
• /
• 2013

In the present study an attempt was made to predict the complex nonlinear parameters of the soil-pile system subjected to the vertical vibration of rotating machines. A three dimensional (3D) finite element (FE) model was developed to predict the nonlinear dynamic response of full-scale pile foundation in a layered soil medium using ABAQUS/CAE. The frequency amplitude responses for different eccentric moments obtained from the FE analysis were compared with the vertical vibration test results of the full-scale single pile. It was found that the predicted resonant frequency and amplitude of pile obtained from 3D FE analysis were within a reasonable range of the vertical vibration test results. The variation of the soil-pile separation lengths were determined using FE analysis for different eccentric moments. The Novak's continuum approach was also used to predict the nonlinear behaviour of soil-pile system. The continuum approach was found to be useful for the prediction of the nonlinear frequency-amplitude response of full-scale pile after introducing the proper boundary zone parameters and soil-pile separation lengths.