• 한국광학회지
• /
• 제8권4호
• /
• pp.260-266
• /
• 1997

DCG(dichromated gelatin : 7.mu.m 두께) 필름을 이용하여 홀로그래픽 편광분리(Holographic Polarization Separation : HPS)소자를 설계 제작하였다. 제작한 HPS소자의 편광특성을 노출시간, 입사각, 편광각 등의 몇가지 물리적 변수들을 이용하여 조사하였다. 실험결과가 Kogelnik의 결합 파동이론에 기초한 이론적 결과와 잘 일치함을 알 수 있었다. 제작한 HPS소자는 633 nm 파장에서 편광 회절 강도비가 500:1(S편광:P편광)이상이였다. 또한 HPS소자의 광 스위치 및 자유공간 광 연결소자로서의 응용 가능성을 제시하였다.

• Wind and Structures
• /
• 제12권1호
• /
• pp.49-61
• /
• 2009

A method is presented to estimate the form drag and the base pressure on a triangular cylinder in the presence of blockage effect. The Strouhal number, which is found to increase with the flow constriction experimentally by Ramamurthy & Ng (1973), may be decoupled from the blockage effect when re-defined by using the velocity at flow separation and a theoretical wake width. By incorporating this wake width into the momentum equation by Maskell (1963) for the confined flow, a relationship between the form drag and the base pressure is derived. Independently, the experimental data of surface pressure from Ramamurthy & Lee (1973) are found to be independent of the blockage effect when expressed in terms of a modified pressure coefficient involving the pressure at separation. Using the potential flow model by Parkinson & Jandali (1970) and its subsequent development in Yeung & Parkinson (2000) for the unconfined flow, a linear relation between the pressure at separation and the form drag is formulated. By solving the two equations simultaneously with a specified blockage ratio and an apex angle of the triangular cylinder, the predictions of the drag and the base pressure are in reasonable agreement with experimental data. A new theoretical relationship for the Strouhal number, pressure drag coefficient and base pressure proposed in this study allows the confinement effect to be appropriately taken into consideration. The present approach may be extended to three-dimensional bluff bodies.

• 약학회지
• /
• 제53권2호
• /
• pp.45-50
• /
• 2009

The purpose of this study is to investigate the best way that health functional food contributes the diversification of pharmacy management at the new point after the separation of prescribing and dispensing practice. In the question of the number of prescription paper, it was more than 200 papers (18.9%), next 100 papers (11.3%). In case of daily total sales volume except prescription fee, it was more than 1,000,000won (28.3%). About the motivation using health functional food, the reason for activation of pharmacy management was 66%. The selling method was mainly by pharmacist recommendation and consumer's need. In comparison with after and before the separation of prescribing and dispensing, more than 60% of subjects answered that sales volume was decreased and no changed. Concerning the ratio of total sales volume to health functional food within 5 years, 66% of subjects expected that it will be increased positively. The type of best pharmacy to handle health functional food was community pharmacy. These results suggest that the handling of health functional food by pharmacist will greatly increase in near futures and will be very important portion for pharmacy management.

• 한국전문물리치료학회지
• /
• 제24권4호
• /
• pp.20-28
• /
• 2017

Background: Rasch analysis has the advantage of placing both the items and the person along a single ratio scale and calibrates person ability and item difficulty onto an interval scale by logits. Therefore, Rasch analysis has been recommended as a better method for evaluating functional outcome questionnaires than traditional analyses. Objects: The aim of current study was to investigate item fit, item difficulty, rating scale, and separation index of the Korean version of the Fullerton Advanced Balance (KFAB) scale using Rasch analysis. Methods: In total, 93 patients with stroke (male=58, female=35) participated in this study. To investigate the item fit, difficulty, rating scale, and separation index of the KFAB scale, Rasch analysis was completed by the Winsteps software program. Results: In this study, all items of the KFAB scale were included in the Rasch model. The most difficult item was 'standing with feet together and eyes closed', and the easiest item was 'two-footed jump'. The rating scale was a 4-point scale instead of the original 5-point scale. Person and item separation indices showed high values that can identify a person with a wide range of balance ability. Conclusion: The KFAB scale appears to be a reliable and valid tool to assess balance function in patients with stroke. Furthermore, the scale was found to discriminate among stroke patients of varying balance abilities.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.46-52
• /
• 2010

In the present work, the aerodynamic characteristics of elliptic airfoils which have a 12% thickness ratio are numerically investigated based on Reynolds-averaged Navier-Stokes equations and a transition SST model at a Reynolds number 8.0$\times$105. The numerical simulation of a synthetic jet actuator which is a well-known zero-net-mass active flow control actuator located at x/c = 0.00025, was performed to control massive flow separation around the leading edge of the elliptic airfoils. Four cases of non-dimensional frequencies were simulated at an angle of attack of 12 degree. It is found that the size of the vortex induced by synthetic jets was getting smaller as the jet frequency becomes higher. Comparison of the location of synthetic jets between x/c = 0.00025 (around the leading edge) and x/c = 0.9 (near the separation) shows that the control near the leading edge induces closed recirculation flow regions caused by the interaction of the synthetic jet with the external flow, but the control applied at 0.9c (near the trailing edge) induces a very small and weak vortex which quickly decays due to weak intensity.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.618-623
• /
• 2003

Solvent extraction experiments for separation of impurities from Ni-rich solution were carried out for manufacturing of high purity Ni compounds from acid leaching solution of spent Ni-Cd secondary battery. Artificial and leaching solutions were used as aqueous phases and PC88A saponified by sodium in kerosene were used as organic phase. The extraction order is Zn>Mn>Co>Ni and extraction percentage of metal ions was increased with increase of the concentration of extractant, initial pH of aqueous phase and ratio of O/A. The separation of cobalt, zinc and manganese from nickel was effectively accomplished at the condition of extraction stage=l, O/A=1 and initial pH 5.0 with 1.0 $mol/dm^3$ PC88A saponified to $50\%$ with NaOH.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1005-1012
• /
• 2001

When vortex tubes are applied to enhance the coefficient of performance of refrigeration system, the smaller one is preferable. However, the existing vortex generator with a nozzle hole diameter of 0.5mm was not suitable due to chocking of the nozzle hole. Therefore, experimental investigation was made to find an appropriate geometry of vortex generator, which could give a comparable effect of energy separation to commercial ones without chocking problem. The tested vortex generators were tangential and spiral types, which had single inducing channel with larger cross-sectional area than that of conventional multi-hole ones. The experimental result showed that the performance of the spiral type was better than that of the tangential one. As a small size of spiral one, the diameter of cold-end orifice is proposed to an half of tube diameter for the application to refrigeration system, while cold mass fraction ratio is 0.5∼0.6 for a desirable operation.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.285-291
• /
• 2001

The polysulfone(PSf)/polyethersulfone(PES) blend membranes were prepared by an immersion precipitation method. N-methyl-2-pyrrolidone(NMP) was used as a solvent and water as a nonsolvent. The composition of the coagulation bath and the dope polymer concentration as well as the blend ratio of two polymers were varied. The membrane morphologies were interpreted on the basis of the phase diagram of the PSf/PES/NMP/water system. As the solvent content in the coagulation bath increased in the single polymer system, the number of macrovoids decreased and the morphology was changed from finger-like to cellular structure. In the given bath condition phase separation occurs earlier for the solutions of PSf/PES blend than for those of single polymer. A horizontally layered structure and horizontal protuberances inside the macrovoid were observed for the membranes formed from PSf/PES blend solutions. This peculiar structure formation can be interpreted by a PSf-rich/PES-rich phase separation followed by a polymer-rich/polymer-lean phase separation during the exchange of solvent and nonsolvent.

• 보건행정학회지
• /
• 제12권3호
• /
• pp.23-35
• /
• 2002

Fiscal crisis in the medical insurance system has put the pressure upon hospitals by increasing the rate of curtailment, since the implementation of the separation of prescription and dispensing of medicine. The purpose of this study is to analyse the curtailment of mdical and drug expenditure before and after the system of separation between prescribing and dispensing and to suggest the problems about current inspection system. Data were obtained from 13 general hospitals and used for analysis of trends on medical & drug expenditure, and curtailment in 1999-2000 at three months intervals. The results were as follows; The scale of curtailment for drug expenditure has been increased on outpatient and inpatient since 2000. For the curtailed drug cost with outpatient, the ratio of curtailed drug expenditure has been increased in the case of prescription within the hospital. These results suggest that review system in social insurance were over-focused to control the cost and it might to impede the validity of review function in insurance system. Therefore, it' s needed to develope the scientific and reasonable criteria for Inspection and evaluation of durg expenditure.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.228-237
• /
• 2007

The flow characteristics around a horn-type rudder behind an operating propeller of a high-speed large container carrier are studied through a numerical method in fully wetted and cavitating flow conditions. The computations are carried out in a small scale ratio of 10.00(gap space=5mm) to consider the gap effects. The Reynolds averaged Navier-Stokes equation for a mixed fluid and vapor transport equation applying cavitation model are solved. The axisymmetry body-force distribution technique is utilized to simulate the flow behind an operating propeller. The gap flow, the three-dimensional flow separation, and the cavitation are the flow characteristics of a horn-type rudder. The pattern of three-dimensional flow separation is analyzed utilizing a topological rule. The various cavity positions predicted by CFD were shown to be very similar to rudder erosion positions in real ship rudder. The effect of a preventing cavitation device, a horizontal guide plate, is also investigated.