• 제목/요약/키워드: Separation of Fe and P

검색결과 76건 처리시간 0.025초

폴리에테르술폰 정밀여과막의 제조 및 특성 연구 (Preparation and Characteristics of Polyethersulfone Microfiltration Membranes)

  • 김노원
    • 멤브레인
    • /
    • 제17권4호
    • /
    • pp.329-337
    • /
    • 2007
  • 본 연구에서는 p-toluenesulfonic acid (TSA)와 polyvinylpyrrolidone (PVP)를 함유한 polyethersulfone (PES) 고분자 용액을 이용하여 PES 멤브레인 내에 최소 공경을 갖는 내부 분리층을 만드는 방법에 관한 새로운 방법을 제시하고자 한다. 팽윤제로 사용된 PVP와 응고제로 사용된 TSA를 함유한 평막형 PES 멤브레인의 제조 및 구조적인 특성 조사가 수행되었으며, 상업용 막에 대등할 만한 투과 성능과 좁은 pore size distribution을 가지는 멤브레인을 제조할 수 있음을 확인하였다. 또한 PVP의 첨가는 멤브레인의 단면구조와 투과 성능에, TSA는 투과 성능보다는 pore size distribution에 영향을 준다는 것을 확인하였으며 이는 FE-SEM 결과와 TSA를 첨가한 멤브레인의 단면 사진에서 내부 최소 기공층의 두께가 두꺼워짐을 확인할 수 있었다.

Formation of iron oxides from acid mine drainage and magnetic separation of the heavy metals adsorbed iron oxides

  • Kwon, Hee-won;Kim, JeongJin;Ha, Dong-Woo;Kim, Young-Hun
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제18권1호
    • /
    • pp.28-32
    • /
    • 2016
  • There are a few thousand abandoned metal mines in South Korea. The abandoned mines cause several environmental problems including releasing acid mine drainage (AMD), which contain a very high acidity and heavy metal ions such as Fe, Cu, Cd, Pb, and As. Iron oxides can be formed from the AMD by increasing the solution pH and inducing precipitation. Current study focused on the formation of iron oxide in an AMD and used the oxide for adsorption of heavy metals. The heavy metal adsorbed iron oxide was separated with a superconducting magnet. The duration of iron oxide formation affected on the type of mineral and the degree of magnetization. The removal rate of heavy metal by the adsorption process with the formed iron oxide was highly dependent on the type of iron oxide and the solution pH. A high gradient magnetic separation (HGMS) system successfully separated the iron oxide and harmful heavy metals.

킬레이트 착화학반응에 의한 음식물폐기물 혐기소화가스 중 황화수소의 제거와 황회수 및 경제성평가 (Reuse of Hydrogen Sulfide by Ferric Chelate Reaction of Food Waste Anaerobic Digestion Gas, Sulfur Recovery and its Economic Evaluation)

  • 박영규;양영선
    • 청정기술
    • /
    • 제20권4호
    • /
    • pp.367-374
    • /
    • 2014
  • 0.1~1 M의 철킬레이트 화합물을 이용한 화학흡수반응에 의한 바이오가스내 황화수소제거를 위한 실험이 수행되었다. 철킬레이트 화합물을 이용한 황화수소제거는 철킬레이트의 최적산화반응을 통해 이루어진다. 바이오가스에 존재하는 황화수소는 킬레이트농도 및 pH 등의 공정조건에 따라 효과적으로 제거될 뿐만 아니라 철킬레이트 산화반응에 의해 황화수소내 존재하는 황성분을 생성시킨다. Fe-EDTA의 농도가 증가하면 철킬레이트 화합물의 착물이 안정되어 황생성의 전환이 증가하였다. 또한 철킬레이트화합물의 안정도는 pH에 따라 변하는 중요한 인자이고 pH 9에서 최적반응을 나타냈다.

Characteristics of a $PbTiO_{3}$ Transmitting/P(VDF-TrFE) Receiving Ultrasonic Transducer in VHF Band

  • Ha Kang-Lyeol;Kim Moo-Joon;Kim Jung-Ho;Kim Jung-Soon
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
    • /
    • pp.311-314
    • /
    • 2004
  • A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using the PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF-TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of a center frequency approximately 40MHz focusing transducer fabricated in this study showed very wide bandwidth which could give an axial spatial resolution better than 30um in the B-mode image for biological tissues.

  • PDF

표면 처리한 Sea sand를 이용한 Se(IV) 제거 - Zeta potential을 통한 Fe(III)간의 반은 메카니즘 연구 (Removal of Se(IV) by the Fe(III)-impregnated Sea sand - Zeta potential approach to depict the binding between Fe(III) and Sea sand)

  • 박상원;강혜정
    • 한국환경과학회지
    • /
    • 제8권2호
    • /
    • pp.205-209
    • /
    • 1999
  • Iron hydroxides are good adsorbents for uncomplexed metals, some metal-ligand complexes and many metal oxyanions. However, their adsorption properties of these precipitations are not fully exploited in wastewater treatment operations because of difficulties associated with their separation from the aqueous phase. This study describes experiments in which iron hydroxides were coated onto the surface of ordinary adsorbents(Sea sand) that are very resistant to acids, The coated adsorbents were used in adsorption of oxyanionic metals. The process was successful in removing some anions such as $SeO_3(-II)$ over a wide range of metal concentrations and sorption of oxyanionic metals increased with decreasing pH. Formation of two surface complexes for oxyanionic metals adsorption on iron hydroxides comprise (1) complexation of the free anion by a positively charged surface site, and (2) protonation of the adsorbed anion (or alternatively adsorption of a protonated form from solution) The coated adsorbents are inexpensive to prepare and could serve as the basis of a useful oxyanionic metal removal.

  • PDF

$(Zr-DEHPA)/n-dodecane-HNO_3$ 금속함유 추출 계에 의한 악티나이드(III)및 RE의 공추출 및 상호 분리 (Evaluation of co- and Mutual Weparation for Actinide(III) and RE by a $(Zr-DEHPA)/n-dodecane-HNO_3$ Extraction System)

  • 이일희;임재관;정동용;양한범;김광욱
    • 방사성폐기물학회지
    • /
    • 제5권2호
    • /
    • pp.123-132
    • /
    • 2007
  • 본 연구는 실제 HLW 수준의 다성분 계 모의 용액으로부터 $Zr-DEHPA/NDD-HWO_3$ 금속함유 추출 계에 의한 Am-Cm/RE 원소의 공분리 및 이의 상호분리 연구를 수행하였다. 우선 금속함유 추출제인 Zr-DEHPA를 자체 제조하고, 제 3상 방지 조건 결정과 질산 농도, DEHPA 농도, Zr 함유량 등이 공추출에 미치는 영향을 평가하여 최적 조건으로 (15g/L Zr-1M DEHPA)/NDD-1M $HNO_3$ 추출 계를 설정하였다. 이때 추출률은 Am (81%), Cm (85%), RE 원소 (80% 이상), Mo (98%), Fe (85%), U (98%), Np (73%), 기타 원소 (5% 이하) 등으로 Am-Cm/RE의 공분리 적용성은 양호하나, U, Np, Mo, Fe의 선제거가 필요하고 특히 제 3상 형성 유발 물질인 Zr이 거의 함유되지 않아야 한다. 그리고 공추출된 Am-Cm/RE를 Am-Cm (역추출제 : 0.05M DTPA-1M Lactic acid-pH 3.6)${\rightarrow}RE$ (역추출제 : 5M $HNO_3$) 순으로 상호 분리하여 각각의 분리계수를 평가하였으며 이때 Am은 65.4%, Cm은 63.9% RE 원소(Y 제외)는 85% 이상이 역추출 되었다.

  • PDF

금속이온 흡착 및 분리를 위한 킬레이트 시약-침윤수지에 관한 연구 (제1보). 8-Hydroxyquinoline-침윤수지 (Studies on the Chelating Agent-Impregnated Resins for the Adsorption and Separation of Metal Ions (Ⅰ). 8-Hydroxyquinoline-Impregnated Resins)

  • 이대운;이택혁;박광하
    • 대한화학회지
    • /
    • 제27권5호
    • /
    • pp.353-360
    • /
    • 1983
  • 8-hydroxyquinoline의 Amberlite XAD-7 수지에 대한 최적 흡착조건의 매질용액은 pH 6.0~9.0의 30% MeOH 수용액이다. 이 매질 용액에서 XAD-4 및 XAD-7 수지에 대한 8HQ의 침윤량은 각각 3.81${\times}$10-2mmol 8HQ/g, XAD-4 resin와 2.60${\times}$10-2mmol 8HQ/g, XAD-7 resin이었다. 8HQ-XAD-4 및 8HQ-XAD-7 침윤수지는 pH 6.0-10.0 영역에서 안정하였으며, 특히 8HQ-XAD-4 수지의 경우에는 흡착된 금속이온의 회수에 사용되는 용리액인 HCl의 농도가 증가할 수록 안정도가 증가하였다. 8HQ-XAD 침윤수지에 대한 Cu(II), Cd(II), Ni(II), 및 Fe(III) 금속이온의 흡착은 pH 6.0~10.0 영역에서 최대 흡착을 보였으며, 금속이온의 흡착몰비(금속이온 : 8HQ)는 Cu(II), Cd(II), Ni(II)의 경우에는 1:2이었으며, Fe(III)의 경우는 1:3으로 나타났다. 8HQ-XAD 침윤수지에 흡착된 금속이온은 5M HCl로 용리하였을 때 정량적으로 회수되었으며, 8HQ-XAD-4 침윤수지는 5M HCl을 용리액을 사용하였을 때 침윤양의 감소없이 5회 이상 재사용이 가능하였다.

  • PDF

펜톤산화에 따른 복합폐수의 처리효율연구 (Treatment Efficiency of Complex Wastewater by Fenton's Oxidation Condition)

  • 성일화
    • 한국환경보건학회지
    • /
    • 제32권5호
    • /
    • pp.446-450
    • /
    • 2006
  • In order to treat the wastewater containing organic compound, pre-treatment system connected with MSP(molecular separation process) was investigated. With the aim of selecting an optimum process of Fenton's oxidation, removal efficiency of each process in the optimum reaction condition was recommended. The $Fe/H_{2}O_{2}$(ferric sulfate to hydrogen peroxide)reagent is referred to as the Fenton's regent, which produces hydroxyl radicals by the interaction of Fe with $H_{2}O_{2}$. The powerful oxidizing ability and extreme kinetic reactively of the hydroxyl radical was well established. Increasing dosage of $Fe/H_{2}O_{2}$ increased removal efficiency as molar ratio of $Fe/H_{2}O_{2}$ between 0.2 and 2.5. Optimum dosage of molar ratio was 1. The removal efficiency for reaction condition was increased as pH decreased when the molar ratio of $Fe/H_{2}O_{2}$ was 1.7. Fenton's oxidation was most efficient in the reaction time 35 min for complex wastewater. Also, coagulation aid experiments using kaolin resulted in 3% of kaolin dosage.

고려 인삼 중의 Invertase에 관한 연구 - 제 1 보 : 조(粗) Invertase의 분리와 성질 - (Studies on Invertase from Korean Ginseng, Panax ginseng C. A. Meyer - I. Separation and Properties of Crude Invertase -)

  • 김병묵
    • 한국식품과학회지
    • /
    • 제12권1호
    • /
    • pp.1-5
    • /
    • 1980
  • 고려 인삼(Panax ginseng C. A. Meyer)중의 invertase를 연구하기 위하여 조(租) 인삼 invertase를 분리 조제하여 그 성질을 조사해 본 결과 다음과 같았다. 1. 조 인삼 invertase는 ammonium sulfate $0.8{\sim}1.0$포화 분획에 의하여 효과적으로 조제되었다. 2. 조 인삼 invertase는 pH $5{\sim}9\;35^{\circ}C$이하의 조건에서 안정성을 나타내었다. 3. 조 인삼 invertase는 최적 pH 5.0, 최적온도 $50^{\circ}C$를 나타내었다. 4. 조 인삼 invertase는 $Ag^{+}\;Mn^{+}\;Hg^{+}\;Zn^{+}\;Rb^{+}$등의 금속 이온에 의하여 저해되었으나 그 저해 정도는 크지 못하였다. 한편 $Ca^{+}\;Cu^{+}\;Fe^{3+}$등에 의한 효소 활성 증대 효과는 특이적이었다.

  • PDF

이온교환수지에 의한 철 및 강의 분석에 관한 연구 (제1보) 양이온 성분의 분리 (The Study on the Separation of the Subsidiary Elements in Iron and Steel by Using Ion Exchangers (I). The Separation of Cations)

  • 이병조;박면용;박기채
    • 대한화학회지
    • /
    • 제17권5호
    • /
    • pp.346-352
    • /
    • 1973
  • 양이온교환수지관($Dowex 50w{\times}12$, $35cm{\times}3.14cm^2$)을 사용하여 0.1M의 V(V), Cu(II), Ni(II), Co(II), Cr(III), Mn(III), Fe(II), 용액을 각기 1ml씩 섞은 혼합 용액 7ml를 다음과 같은 용리액으로 용리시켜 정량적으로 분리하였다. 즉 Fe(II), V(V), Cu(II), Ni(II), Co(II)에 대하여는 0.6M 염화나트륨과 0.1M 타르타르산나트륨의 혼합용액 (pH 2.00과 4.50)을 Mn(II)과 Cr(III)에 대하여는 3M 염화나트륨과 0.1M 타르타르산나트륨의 혼합용액 (pH 4.50과 5.00)을 용리액으로 사용하여 단계적으로 용리하였다. 많은 양($97\%$ 정도)의 Fe(II)과 V(V), Cu(II), Ni(II), Mn(II), Cr(III)을 섞은 시료용액은 먼저 음이온교환수지관($Dowex 1{\times}8$, $15cm{\times}3.14cm^2$)을 사용하여 4.0M 염산으로 용리하여 대부분의 철을 분리한다. 이때 V(V), Ni(II), Mn(II), Cr(II)은 같은 위치에서 용출되므로 함께 받고 다음에 Cu(II)는 소량의 철과 함께 용출된다. 이것을 다시 양이온수지관($Dowex 50w{\times}12$, $10cm{\times}3.14cm^2$)을 사용하여 여러 가지 이온들을 분리할 수 있었으며 철강중에 들어있는 양이온 성분들도 같은 방법으로 분리할 수 있었다.

  • PDF