• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.59-68
• /
• 2001

Unlike existent field flow fractionation, new method, osmotic sink field flow fractionation is introduced and used ultrafiltration hollow fiber membranes as separation channel. This hollow fiber osmotic sink field flow fractionation is called HF-OSFFF. A theory that describes the retention, relaxation, resolution, plate number for the system, has been developed and experimentally verified by separation model of po1ystyrene latex beads. At external field, it is measured that radial flow rates change according to various concentrations of PEG solutions. Concentration of PEG solution vs. radial flow rate is a linear relation. For diameter distribution of unknown polymer sample, HF-OSFFF compared with the commercial capillary hydrodynamic flow fractionation (CHDF).

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.69-76
• /
• 2011

PEMFC (polymer electrolyte membrane fuel cell) is device that generates electricity from hydrogen. It is one of the subjects related to renewable energy and various research has been conducted on the PEMFC. PEMFC has low operating temperature and high efficiency among fuel cells, and is given attention as means for automobile and domestic use. Analysis of flow field pattern in supplying hydrogen and oxygen is part of the research to increase PEMFC efficiency. In this study, separation plate currently used in PEMFC is transformed to wave shape and mass transfer characteristics in the channel is examined through numerical and experimental analysis. Wave shape separation plate yielded 18% increase of efficiency compared to separation plate used in normal channel. And improvements in mass transfer characteristics were verified.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.70-73
• /
• 2003

TLC condition was developed for its simple separation and quantitative analysis of lactic acid. Rapid and clear separation of lactic acid by silica gel TLC plate was obtained by using nitromethane : 1-propanol : $H_2O$ (2 : 5 : 1.5, v/v/v) and a suitable dipping solution of 40 mg bromocresol purple in 100 mL 5% ethanol (pH 10.0). The lactic acid was shown as a bright yellow spot on a light cinnabar background. The quantitatively detectable concentration range of lactic acid was between 0.5 and 4% with 99.4%, confidence. Quantitative TLC analysis result was confirmed with HPLC and with enzymatic Quantitative analysis methods (by using lactate dehydrogenase).

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1435-1439
• /
• 2002

This paper presents a form of the cohesive surface separation potential, which can produce potential curves by varying a single dimensionless parameter. Results show that a partial modification of Xu and Needleman's (1994) cohesive surface separation potential makes it possible to present the other potential corves as a special case as long as the normal separation is concerned. The proposed potential may describe interfacial debonding-crack initiation and growth-character of materials and, through numerical simulation, provide an insight for the effect of different cohesive surface separation potentials on the interfacial debonding.

• Structural Engineering and Mechanics
• /
• v.2 no.3
• /
• pp.295-309
• /
• 1994

The present paper concerns the mathematical study and the numerical treatment of the problem of semirigid connections in bolted steel column base plates by taking into account the possibility of appearance of separation phenomena on the contact surface under certain loading conditions. In order to obtain a convenient discrete form to simulate the structural behaviour of a steel column base plate, the continuous contact problem is first formulated as a variational inequality problem or, equivalently, as a quadratic programming problem. By applying an appropriate finite element scheme, the discrete problem is formulated as a quadratic optimization problem which expresses, from the standpoint of Mechanics, the principle of minimum potential energy of the semirigid connection at the state of equilibrium. For the numerical treatment of this problem, two effective and easy-to-use solution strategies based on quadratic optimization algorithms are proposed. This technique is illustrated by means of a numerical application.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.155-162
• /
• 2000

The reverse osmosis membrane housing(HY) was developed for excellent distribution of a feed solution, and the separation performance was compared with the commercialized Rochem(RC) system. The permeation flux of HY system was a little lower than that of RC system. On the other hand, the NaCl rejection ra4io was generally higher. Also, the permeation flux and rejection ratio for type A, B and C modules(disc plate and frame type) were measured using NaCl, sucrose and butanol solutions. The separation performance of type C module for NaCL and sucrose solutions was the most effective, and then those of type A and B were followed, respectively. However, the separation performance for butanol solution was type B, C and A order. The flux improvement ratio of type B to A increased as butanol concentration decreased or operating pressure increased up to 28 bar.

• Explosives and Blasting
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2014

TNT was blasted on the surface of steel plates and concrete block to study the effect of separation distance between object and charge. The equation of US Army Corps of Engineers turned out to be rather conservative. Effect of separation distance is larger for steel plate than concrete block. Steel plate cannot be cut by standard or more charge in the case of 2 cm separation while the concrete block can be crushed with the same distance.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.9-28
• /
• 2000

The purpose of this article, the first part of series, is to describe the general theory applicable to various chromatographic procedures. History of chromatography, separation of matters, classification of chromatography, underlying principles of separation in chromatography, covering resolution, column efficiency, column selectivity, and capacity factor, movement of solute in chromatographic phase, including elution development, displacement development, and frontal analysis, were discussed. Mathematical description of plate theory and thermodynamic viewpoint of retention were emphasized.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.84-91
• /
• 2001

Comparison between performance of a plate fin and that of a modified plate fin is investigated as a function of the position, the non-dimensional width and height of wings as well as the non-dimensional fin length using a two-dimensional separation of variables method. The ratio of the incremental rate of heat loss to that of the area of a modified plate fin is also presented as a function of the height of wings. The modified plate fin is made by attaching the wings to upper and lower sides of a plate fin. One of the results shows that performance of a modified plate fin is more improved as the wings approach left (higher) thermal reservoir.

• Wind and Structures
• /
• v.17 no.5
• /
• pp.537-552
• /
• 2013

Wind tunnel experiments were performed to study the wind loads on an inclined flat plate with and without a guide plate. Highly turbulent flow, which corresponded to free-stream turbulence intensity on the flat roof of low-rise buildings, was produced by a turbulence generation grid at the inlet of the test section. The test model could represent a typical solar collector panel of a solar water heater. There are up-stream movements of the separation bubble and side-edge vortices, more intense fluctuating pressure and a higher bending moment in the turbulent flow. A guide plate would result in higher lift coefficient, particularly with an increased projected area ratio of a guide plate to an inclined flat plate. The value of lift coefficient is considerably lower with increased free-stream turbulent intensity.