• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1511-1520
• /
• 2004

A flow visualization of the two-dimensional rigid fling-clap motions of the flat-plate wing are performed to gain knowledge of butterfly mechanisms that might be employed by butterflies during flight. In this numerical visualization, the time-dependent Navier-Stokes equations are solved for cyclic fling and clap types of wing motion. The separation vortex pair that is developed in the fling phase of the cyclic fling and clap motion is observed to be stronger than those of the fling followed by clap and pause motion(1st cycle motion). This stronger separation vortex pair in the fling phase is attributable to the separation vortex pair of the outside space developed in the clap phase as it moves into the opening in the following fling phase. Accordingly, higher lift and power expenditure coefficients in the fling after clap phase is caused by the stronger separation vortex pair.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.83-86
• /
• 2007

Turbulent flow analysis is conducted around the multi-stage launch vehicle including base region and detachment motion of strap-on boosters due to resultant aerodynamic forces and gravity is simulated. Aerodynamic solution procedure is coupled with rigid body dynamics for the prediction of separation behavior. An overset mesh technique is adopted to achieve maximum efficiency in simulating relative motion of bodies and various turbulence models are implemented on the flow solver to predict the aerodynamic forces accurately. At first, some preliminary studies are conducted to show the importance of base flow for the exact prediction of detachment motion and to find the most suitable turbulence model for the simulation of launch vehicle configurations. And then, developed solver is applied to the simulation of KSR-III, a three-stage sounding rocket researched in Korea. From the analyses, after-body flow field strongly affects the separation motions of strap-on boosters. Negative pitching moment at initial stage is gradually recovered and a strap-on finally results in a safe separation, while fore-body analysis shows collision phenomena between core rocket and booster. And a slight variation of motion is observed from the comparison between inviscid and turbulent analyses. Change of separation trajectory based on viscous effects is just a few percent and therefore, inviscid analysis is sufficient for the simulation of separation motion if the study is focused only on the movement of strap-ons.

• 항공우주기술
• /
• 제4권2호
• /
• pp.199-202
• /
• 2005

KSLV-I 노즈페어링 분리장치 검증 모델인 1:2 축소형 노즈페어링의 분리운동 해석을 수행하였다. 해석과 시험을 비교하여 페어링 분리운동 해석 방법을 검증하고 분리운동 특성을 분석하였다. 시험결과 약 5%의 해석오차를 확인할 수 있었다.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2355-2364
• /
• 2018

We evaluated the effect of particle size and associated dynamics on a hydrocyclone separation process in order to understand the movement of the particle trajectories inside the hydrocyclone via numerical analysis, with particles of acid hydrolysis residues discharged in $TiO_2$ production via the sulfate method as a case study. The values obtained from the numerical simulation were successfully compared with those from experimental tests in the literature, allowing a description of the dynamics of the particles, their acting forces, and their relevant properties together with separation efficiency. The results showed that particle motion is jointly controlled by the drag force, the pressure gradient force and the centrifugal force. With increasing particle size, the influence of the drag force is weakened, whereas that of the centrifugal force and pressure gradient is strengthened. Factors including particle density, slurry viscosity, and inlet slurry flow rate also contribute to a clear and useful understanding of particle motion behavior in the hydrocyclone as a method for improving the separation efficiency.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• 항공우주기술
• /
• 제2권1호
• /
• pp.171-181
• /
• 2003

KSR-III의 탑재부를 보호하고 있는 nose fairing은 목표 고도에 도달하면 화약 폭발에 의한 분리 장치의 작용으로 탑재부가 주어진 임무를 수행할 수 있도록 로켓으로부터 떨어져 나가도록 설계되어 있다. 이때 분리된 fairing이 로켓에 부딪치지 않고 안전하게 분리될 수 있게 하기 위해서는 적절한 크기의 분리력이 가해져야 하며, 이러한 분리력의 결정에 있어서 공기의 영향이 거의 없는 고도도 조건을 가정하였다. 그러나 KSR-III의 설계가 진행됨에 따라 발사체의 임무에 수정이 가해졌으며, fairing의 분리도 고도고가 아닌 공력의 영향이 상당 부분 남아 있는 고도 45km에서 이루어질 것으로 예상됨으로써 이러한 새로운 조건에서도 충분히 안전한 분리를 이룰 수 있는 지의 여부에 대한 확인이 필요하게 되었다. 본 연구에서는 병렬형 부스터 분리 운동 해석을 위해 개발되었던 6자유도 운동방정식 해석 프로그램인 PASEM을 fairing 힌지를 모사할 수 있도록 수정을 가하여 fairing의 분리 운동을 예측하였다. 먼저 지상 시험 결과와의 비교를 통하여 힌지 운동 모사의 정확도를 검증하고 정확한 분리 조건을 설정하였다. 다음으로 고도 45km에서 받음각, 중력 작용 방향, 돌풍의 존재 여부 등을 바꾸어 가며 안전한 분리가 가능함을 판단하였으며, 힌지 이탈각을 60도에서 45도로 줄여줌으로써 훨씬 더 안전한 분리가 가능함을 확인하였다. 또한 발사 당일의 기상 조건의 변화에 따라 분리 고도가 40km로 낮추어져도 안전한 분리한 가능함을 알 수 있었다.

• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.1-12
• /
• 2004

나비가 비행할 때 적용할 수 있는 프링-크래핑 (fling-clapping) 날개의 첫 번째 사이클 운동에 관한 흐름 가시화가 수행되었다. 본 수치적 흐름 가시화 연구에서는 프링-크랩-정지 (fling-clapping-pause), 크랩-프링-정지(clap-fling-pause)의 단계를 거치는 두 가지 형태의 날개 운동 해석을 위해 시간의존 Navier-Stokes 방정식을 이용하였다. 결과에서는 두개군의 분리와류 쌍과 그것들이 전개되는 과정과 같은 주요 흐름특성이 관찰되었다. 프링-크랩-정지 운동의 경우, 날개가 열리는 프링단계에서 시계반대방향의 강한 분리와류 쌍이 날개 사이의 열린 내부공간에 발달된다. 이어지는 크랩단계에서 분리와류 쌍은 열린 내부공간 밖으로 이동된다. 크랩-프링-정지 운동의 경우, 크랩 단계의 외부 공간에서 발달한 분리와 류 쌍은 뒤따르는 프링 단계에서 열린 내부공간내로 움직인다. 크랩-프링-정지 운동의 프 링 단계에서 발생된 열린 내부공간의 분리와류 쌍은 프링-크랩-정지 운동의 프링단계에서 발생된 열린 내부공간의 분리와류 짱보다 더 강한 와류 쌍임이 관찰되었다.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.87-110
• /
• 2020

Catamaran has recently been a choice to support a typical vertical axis turbine in floating tidal current energy conversion system. However, motion responses associated with the catamaran can reduce the turbines efficiency. The possibility to overcome this problem isto change the catamaran parameter by varying and simulating the demi-hull separations to have lower motion responses. This simulation was undertaken by Computational Fluid Dynamic (CFD) using potential flow analysis. Cases of demi-hull separation were considered, with ratios of demi-hull separation (S) to the breadth of demi-hull (B), ^S/_B of 3.45, 4.95, 6.45, 7.2 and 7.95. In order to compare to the previous works in the literature, the regular wave was set with wave height of 0.8 m. Furthermore, the analysis was carried out by irregular waves with significant wave height, H_s, of about 0.09 to 1.5 m and the wave period, T, of about 1.5 to 6 s or corresponding to the wave frequency, ω, of about 1.1 to 4.2 rad/s. The wave spectrum was derived from the equation of the International Towing Tank Conference (ITTC). For the case of turbines-loaded catamaran under consideration, the new finding is that the least significant amplitude response can be satisfied at the ratio ^S/_B of 7.2. This study indicates that selecting a right choice of demi-hull separation ratio could contribute in reducing motion responses of the tidal current turbines-loaded catamaran.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.19-29
• /
• 2006

본 연구에서는 비행중인 유도무기의 기체분리에 대한 수치적 해석을 수행하였다. 기체의 정확한 분리운동을 모사하기 위해 삼차원 공간에서 각각의 물체가 연결되어 움직이는 6자유도 운동방정식을 유도하였으며, 물체를 둘러싼 격자계의 독립적인 처리를 위해 개발된 비정렬 중첩격자기법과 연계하였다. 개발된 해석기법은 유도무기의 받음각이 0도와 5도인 경우의 기체분리운동 해석에 적용되었으며, 이를 통해 본 연구에서의 해석기법이 다중 물체간의 상대운동이 있는 비정상 유동장을 해석하는데 효과적임을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.578-582
• /
• 2000

When the motion of vibrating structure is restrained due to the adjacent objects, the frequencies and the mode shapes of the structure change and its vibration characteristics becomes unpredictable, in general. Although the importance of the study on this type of vibration model increases in many engineering areas, most studies conducted so far are limited to the theoretical study on dynamic responses of the structure with the separation plate, including some experimental works. In the paper, both numerical analyses and experiments are conducted to study the chaotic vibration characteristics and the dynamic response of a fixed-free beam which has restrained motion at the free end by the separation plates. Results are presented for various magnetic forces and gaps between stops.