• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.71-75
• /
• 2001

The first step for recycling the CRT bulb is to remove frist seals between the panel and funnel. For this purpose, various kinds of methods have been used. One of those is to use the nitric acid, which is a proven technology and widely used in CRT-making industries. The process. however. has a problem of NOx generation. Such a drawback can be overcome by using a new chemical. This new chemical can remove the frit without NOx generation. This paper describes the dissolution ability of the chemical for lead and zinc oxides and the application to the separation of the CRT panel from its funnel.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.804-808
• /
• 2005

A pneumatic tire is made up of many flexible filaments of high modulus cord of natural textile, synthetic polymer, glass fiber, or fine hard drawn steel embedded in and bonded to a matrix of low modulus polymetric material. Adhesion property of these materials is very important in tire durability safety because belt-leaving-belt tread separation reduces the ability of a driver to control a vehicle, whether or not the separation is accompanied by a loss of air. In this study adhesion test of carcass-belt-tread is conducted on material properties of 5 PCR tire model, which are on sale in domestic market and analyzed adhesion properties. For those tire models FMVSS 109 indoor high speed durability test is conducted to analyze the correlation between adhesion force and high speed performance of tires and found the correlation between the two test results.

• 한국환경보건학회지
• /
• 제35권1호
• /
• pp.53-57
• /
• 2009

In order to treat the complex wastewater containing organic compound and solids, pre-treatment system associated with molecular separation process were investigated. The reductions of COD and turbidity were obtained after coagulation processes using Alum (Aluminium sulfate, $Al_2(SO_4)_2{\cdot}18H_{2}O$) and PACl (poly aluminium chloride as 17% $Al_{2}O_{3}$). The results of study were as follows: using variable dosage of Alum, COD removal was highest at 4,000 mg/l, and the reduction of COD and turbidity was 42% and 92%, respectively. The optimum coagulation would be effective at pH 7.3 than pH 9.0 by the addition of alum at a concentration of 6,000 mg/l and PACl was add at 4.25% in raw complex wastewater with 2,000 mg/l alum at pH 7.3, the reduction of COD was reduced by 32%. But coagulation aid experiments indicated that PACl would be more effective in sludge separation ability than COD removal efficiency.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.136-139
• /
• 2004

Olefin/paraffin separation by the facilitated transport membrane using silver salts as carriers has been considered as a promising alternative to the conventional energy intensive distillation process. The basis for the separation is the ability of silver ions to react reversibly with olefin forming silver-olefin complexes.(omitted)

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.23-38
• /
• 2003

The purpose of this study is to develop an improved marker auto-identification algorithm for reduce of data processing time through improve the efficiency of noise elimination and marker separation. The maker auto-identification algorithm was programming named KUMAS used Delphi language. For the study, various experiments were conducted for the verification of KUMAS. and compared two systems of established with the KUMAS. Four different motions - cycling, gait, rotation, and pendulum -, were selected and tested. Motions were filmed 30Hz frames rate per second. ${\chi}^2$ used for statistical analysis. Significant level were ${\alpha}=.05$. The test results were as follow. 1. Increased the success ratio of marker auto-identification. 2. The efficiency of marker auto-identification was remarkably improved through marker separation, noise elimination. 3. The marker auto-identification ability was improved in 2D-image plane include the 3D motion. 4. Significant different were found between KUMAS and B-SYS(established system) with non-input the artificial noise frames, input the artificial noise frames and total frames.

• 보건행정학회지
• /
• 제10권2호
• /
• pp.41-77
• /
• 2000

This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.757-762
• /
• 2001

CFT concrete has high flowing, high strength and resistance to material separation to use skyscraper structure. It is considered that concrete could fill the lower part of Diaphragm up. This kinds of CFT concrete hardly apply to building below 20 stories. Using the common use strength concrete to building below 20 stories brings to reduce construction cost. This concrete is needed that valid fluidity and packing ability with unit cement content as common use strength concrete. Offering a fundamental data and proportioning in CFT concrete of below 20 stories, it is executed basic property test, analysis of proportioning and mock up test.

• 한국생활과학회지
• /
• 제14권3호
• /
• pp.379-386
• /
• 2005

Bowlby has proposed that child-mother attachment is important in the child's representation of self. In this study, the child's emotional intelligence was examined in connection with child-mother attachment with a sample of 5-year-olds. The quality of attachment was assessed based on the child's behavior on reunion following a separation, using a SSP (Strange Situation Procedure) system devised by Main and Solomon. The emotional intelligence was assessed with Lee's Scale for young children. The results show significant connections between child-mother attachment and the emotional intelligence. Specific areas of emotional intelligence are related to particular patterns of attachment. Namely, securely attached children are assessed significantly higher than the unsecurely attached, not only in the ability to identify and control their own emotions, but also in the ability to control others' emotional state. Also, securely attached children perceive their social competence significantly higher.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2003년도 창립학술대회
• /
• pp.403-415
• /
• 2003

This study is performed to examine the relationships between trust and antecedents in cyberspace. Trust is the major control system in cyberspace. Different time, different spaces, different cultures, indistinct boundaries, flexible structure, separation of information from matters, cybernetics, difficulty of control are differential characteristics between cyberspace and physical space. Providing fit information, use of effective electronic channels, previous trust management, feedback system about output, flexible culture, self-regulation, off-line meeting, providing information about tasks and roles, ability, and justice are supposed to have effects on trust in cyberspace. By electronic mediated systems, the company will have more business opportunity. But trust will be conditional factors of expanding business in cyberspace.

• 대한화학회지
• /
• 제65권4호
• /
• pp.254-259
• /
• 2021

The purpose of this work is the development of a method for an effective, less expensive, rapid, and simultaneous determination of three phenolic compounds (caffeic acid, gallic acid, and quercetin) widely present in food resources and known for their antioxidant powers. The method relies on partial least squares (PLS) calibration of UV-visible spectroscopic data. This model was applied to simultaneously determine, the concentrations of caffeic acid (CA), gallic acid (GA), and quercetin (Q) in six herb infusion extracts: basil, chive, laurel, mint, parsley, and thyme. A wavelength range (250-400) nm, and an experimental calibration matrix with 21 samples of ternary mixtures composed of CA (6.0-21.0 mg/L), GA (10.0-35.2 mg/L), and Q (6.4-17.5 mg/L) were chosen. Spectroscopic data were mean-centered before calibration. Two latent variables were determined using the contiguous block cross-validation procedure after calculating the root mean square error cross-validation RMSECV. Other statistic parameters: RMSEP, R², and Recovery (%) were used to determine the predictive ability of the model. The results obtained demonstrated that UV-visible spectrometry and PLS regression were successfully applied to simultaneously quantify the three phenolic compounds in synthetic ternary mixtures. Moreover, the concentrations of CA, GA and Q in herb infusion extracts were easily predicted and found to be 3.918-18.055, 9.014-23.825, and 9.040-13.350 mg/g of dry sample, respectively.