• 방사성폐기물학회지
• /
• 제8권4호
• /
• pp.303-309
• /
• 2010

사용후핵연료 건식처리공정(pyrochemical process)에서 LiCl-KCl 공융염의 회수는 방사성폐기물 부피감량과 원료물질 회수를 위해 반드시 필요하다. 본 논문은 진공증류공정을 이용하여 희토류 침전물(희토류 산염화물 또는 산화물)내 잔류하는 LiCl-KCl 공융염 회수에 관한 것이다. 진공증류시험장치에서 희토류 침전물내 공융염은 효과적으로 휘발 및 분리되었다. 분리된 공융염은 감압증류시험장내 세 지점에서 침적되거나 필터에 포집되으며, 침적되거나 포집된 공융염을 회수하는 것은 쉽지 않았다. 이 문제점을 해결하기 위해 감압조건에서 온도구배를 이용하여 공융염 거동을 제어할 수 있는 공융염 진공증류/응축회수 시스템을 개발하였으며, 이 장치를 이용하여 휘발된 공융염을 회수용기에서만 응축시켜 쉽게 회수할 수 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• 유기물자원화
• /
• 제13권3호
• /
• pp.105-118
• /
• 2005

본 연구는 현행 음식물류폐기물 통계 체계 문제점 및 개선점 분석을 목적으로 수행되었으며, 4개 지역(고밀도, 중밀도, 중저밀도, 저밀도)을 대상으로 4계절에 걸친 표본조사를 실시하여 배출원별 원단위에 근거한 산출방식으로 해당 지역의 전체 발생량을 추론하였다. 이렇게 산출된 발생량과 현행 통계상에서 제시하고 있는 발생량 간의 차이를 분석하였으며, 이와 함께 112개 지자체를 대상으로 음식물류폐기물 산정 범위 및 방식 분석 등을 통해 국내 음식물류폐기물 통계 체계의 문제점 및 해결방안을 검토 하였다. 112개 지자체를 대상으로 한 설문 조사결과를 보면, 음식물 통계 산출 기준은 크게 5가지로 분류 된다. 대도시 및 중소도시의 경우, 자원화시설 반입량에 근거하는 지자체가 가장 많았으며, 도농지역 및 농어촌도시 일수록 원단위 발생량을 통한 추정에 의해 통계 산출이 이루어지는 것으로 나타났다. 4개 지역의 음식물류폐기물 발생량 표본조사 분석결과는 통계상에서 제시하는 결과와 10%~40% 높은 것으로 조사되었으며, 이는 기존 통계에서는 고려하지 않았던 미분리배출량의 포함이 가장 큰 이유로 판단된다. 또한, 분리배출량에 근거하여 발생량을 산출하는 지역이 원단위발생량을 이용하여 발생량을 단순 추정하는 지역에 비해 표본조사와 통계 자료 간 편차가 더 적은 것으로 조사되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.127-136
• /
• 2015

This paper is a study of a simple distillation process. Its objective is to compare fuel production from plastic waste, its data collecting is from the factory and simple data calculated a suitable evaluation on the simple distillation plant built before calculation. The experiment with a simple distillation process is separated into three sections. The first section is a simple distillation process of distillation producing diesel using heat source by biomass. The second section is distillation process which produces fuel using heat source by burner. The third section uses heat source by burner incorporate with biomass. The experiment reveals that the result of the second section is the most efficient. In comparison with the experiments and the simple calculation, the result on the efficiency of work has error less than 5% and it is sufficient for the next experimental process. Thus, the study and design on a simple distillation process produces fuel from plastic waste has to concern mainly on design heat exchangers, flow rate and optimized temperature. Further study on this plant can be developed throughout the county due to its low cost and efficiency.

• 신재생에너지
• /
• 제7권1호
• /
• pp.29-35
• /
• 2011

The waste treatment fee and energy production effect of Wonju city RDF plant, the first RDF manufacturing plant in Korea, were investigated in the study. All plant operation data, like total weight of received wastes, produced RDF and separated rejects in processes were fully recorded for mass balance calculation of the plant in 2009. Also all consumed oil and electricity were recorded for energy balance calculation. The results showed that the waste treatment fee not including the RDF sales price of 25,000 won/ton-RDF was 116,573 won/ton-MSW and it went down to 105,298 won when included the RDF price. Produced RDF was 40.2% of total received waste in weight. Three components analysis by mass balance calculation of total received waste showed that Wonju city's MSW was 32.4% of combustible, 37.5% of water and 30.1% of incombustible respectively. Energy effect was found that total amount of produced energy was about 4 times more than that of consumed energy.

• 한국농촌건축학회논문집
• /
• 제23권1호
• /
• pp.1-8
• /
• 2021

In this study, a real-sized experimental equipment (pilot plant) was built at the site based on the preliminary research data to develop a movable separator for the mixed construction waste that can be implemented in agricultural areas to review its feasibility through the evaluation of its separation efficiency by waste types. The final construction of the movable separator and experimental results of the separation efficiency are summarized as follows. 1) The separation performance according to the blade type was the best for the combustible wastes either with 26 numbers of L-type blades and 32 numbers of pin type blades. As far as combination of blade types, when the L-type and pin-type were combined, the best separation efficiency was achieved. 2) The separation efficiency for waste wood by the conveyor type and angle of inclination (slope) of the trommel was the best when the conveyor had ribs of seagull shape with the angle of inclination 45°. 3) The separation efficiencies by process showed that 65.9% was separated as inorganic demolition wastes, 18.2% as waste woods, and 16.0% as combustible wastes at conveyor speed of 2-3 rpm, and the error rate was the least from the waste types generated in the dismantle site.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권11호
• /
• pp.1627-1633
• /
• 2012

This study was to evaluate the feasibility of recycling the solids separated from swine wastewater treatment process as a fuel source for heat production and to provide a data set on the gas emissions and combustion properties. Also, in this study, the heavy metals in ash content were analyzed for its possible use as a fertilizer. Proximate analysis of the solid recovered from the swine wastewater after flocculation with organic polymer showed high calorific (5,330.50 kcal/kg) and low moisture (15.38%) content, indicating that the solid separated from swine wastewater can be used as an alternative fuel source. CO and NOx emissions were found to increase with increasing temperature. Combustion efficiency of the solids was found to be stable (95 to 98%) with varied temperatures. Thermogravimetry (TG) and differential thermal analysis (DTA) showed five thermal effects (four exothermic and one endothermic), and these effects were distinguished in three stages, water evaporation, heterogeneous combustion of hydrocarbons and decomposition reaction. Based on the calorific value and combustion stability results, solid separated from swine manure can be used as an alternative source of fuel, however further research is still warranted regarding regulation of CO and NOx emissions. Furthermore, the heavy metal content in ash was below the legal limits required for its usage as fertilizer.

• 한국유체기계학회 논문집
• /
• 제8권1호
• /
• pp.30-36
• /
• 2005

A sludge treatment system for introducing the waste water mixture with paint sludge from the water bath of paint booth and for recycling cleaned water to paint booth after sludge separation is developed. Floated sludge is introduced from the water surface in the bath by using floating-skimmer, and is conveyed by pump to the centrifugal separator where sludge and cleaned water are separated. From the operation results of the present sludge treatment systems applied in actual paint booths, paint sludge can be separated automatically and effectively from water bath with its water content of $60-70\%$, and sludge-free clean water is returned to paint booth.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.259-266
• /
• 2004

Developed is a sludge treatment system for introducing the waste water mixture with paint sludge from the water bath of paint booth and for recycling cleaned water to paint booth after sludge separation. Floated sludge is introduced from the water surface in the bath by using floating skimmer, and is conveyed by pump to the centrifugal separator where sludge and cleaned water are separated. From the operation results of the present sludge treatment systems applied in actual paint booths, paint sludge can be separated automatically and effectively from water bath with its water content of $60-70\%$, and sludge-free clean water is returned to paint booth.