• Journal of Environmental Health Sciences
• /
• v.38 no.3
• /
• pp.269-276
• /
• 2012

Objectives: The purpose of this study was to provide policy directions for air pollution reduction by analyzing the variation in the characteristics of air contaminants around the Gyeonggi Province area. Methods: The data used in the study was obtained from air quality monitoring stations operated by the Gyeonggi Provincial Government. The target area was the air quality management area of the Gyeonggi Province region. Results: The concentration of $PM_{10}$ (particles measuring $10{\mu}m$ or less) in 2009 was $60{\mu}g/m^3$, which has been reduced by about 2.7% per year after improvement countermeasures were emplaced. The air pollution control policy was especially more effective for coarse particulate matter (CPM, $PM_{10-2.5}$). The improvement of $NO_2$ pollution was generally very low, especially in cities which had considerable automobile traffic. The concentration of $SO_2$ pollution was rapidly improved in industrial areas, but did not show any difference for multiple and general cities. The predicted concentration of $PM_{10}$ for 2014 based on the trend over 2001-2009 was $53.4{\mu}g/m^3$, which fails to meet the target concentration of $40{\mu}g/m^3$. The predicted concentration of $NO_2$ shows a very low probability of achieving the target concentration of 22 ppb, and thus the current improvement of air quality has proven unsatisfactory. Conclusion: Air pollution control policy should be enforced according to regional pollution characteristics in order to obtain maximum effectiveness in improvement.

• Economic Analysis
• /
• v.27 no.3
• /
• pp.61-96
• /
• 2021

This study is to structurally examine the regional income disparity in Korea. It measures the regional income inducement by household consumption expenditure per unit income, and the regional interdependency of income using 2005 and 2015 Regional Input-Output Tables of 16 provincial regions of Korea. The results are as follows. Firstly, the income inducement by consumption expenditure per unit income decreased overall, mainly due to the decrease in the income inducement of other regions than due to that of their region. Secondly, in many regions, the inter-relational income dependency per unit income decreased also, this too, mainly due to the decrease in the income transfer to other region. And, the income inducement effects of consumption expenditure per unit income of Seoul and Gyeonggi, which occupy a large portion of the Korean economy, were lower than that of other regions, but took the largest portion of income inducements generated by other regions as well as by themselves and absorbed the income transfers from other regions the most. The higher income inducement and income absorption in Seoul and Gyeonggi by consumption expenditure of other regions were mainly because of the high share in service of their consumption structure, the progress in tertiarization of their industrial structure, and the high wage portion. These results also mean that viewed from the regional interdependency of income, the income of Seoul and that of Gyeonggi are highly dependent on the income of other regions. Especially, Gyeonggi which leads the overseas exports of high-tech based manufactured products, has other external factors that contribute to their high income inducement, whereas, Seoul which shows high income absorption using its inter-relations with other domestic regions based on the services, has an income-generating structure that is sensitive to other regions' economic situation. Amid overall declines in regional income inducements and in income transfers, and continuing concentrations into Seoul and Gyeonggi regions, to alleviate the regional disparity, the regional industry policies should, rather than benchmarking the policies of the two concentrated regions, enhance their own inter-regional relationships by strengthening the comparative advantage of their regionally specialized industry.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.4
• /
• pp.41-53
• /
• 2007

The Baekdudaegan Mountain Range is a backbone of the Korean Peninsula which carries special spiritual and sentimental signatures for Koreans as well as significant ecological values for diverse organisms. However, in spite of importance of this region, the forests of Baekdudaegan have been damaged in a variety of human activities by being used as highland vegetable grower, lumber region, grass land, and bare land, and are still undergoing destruction. The existing researches had determined the details of the damage through on-site and recent observations. Such methods cannot provide quantitative and integrated analysis therefore could not be utilized as objective data for the ecological conservation of Baekdudaegan forests. The goal of this study is to quantitatively analyze the forest damage in the Baekdudaegan preservation region through land cover categorization and change detection techniques by using satellite images, which are 1980s, and 1990s Landsat TM, and 2000s Landsat ETM+. The analysis was executed by detecting land cover changed areas from forest to others and analyzing changed areas' spatial patterns. Through the change detection analysis based on land cover classification, we found out that the deforested areas were approximately three times larger after the 1990s than from the 1980s to the 1990s. These areas were related to various topographical and spatial elements, altitude, slope, the distance form road, and water system, etc. This study has the significance as quantitative and integrated analysis about the Baekdudaegan preservation region since 1980s. These results could actually be utilized as basic data for forest conservation policies and the management of the Baekdudaegan preservation region.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.743-752
• /
• 2021

The three-dimensional distribution of the fault was evaluated using gravity field interpretation such as curvature analysis and Euler deconvolution in the Seoul-Gyeonggi region where the Chugaryeong fault zone was developed. In addition, earthquakes that occurred after 2000 and the location of faults were compared. In Bouguer anomaly of Chugaryeong faults, the Pocheon Fault is an approximately 100 km fault that is extended from the northern part of Gyeonggi Province to the west coast through the central part of Seoul. Considering the frequency of epicenters is high, there is a possibility of an active fault. The Wangsukcheon Fault is divided into the northeast and southwest parts of Seoul, but it shows that the fault is connected underground in the bouguer anomaly. The magnitude 3.0 earthquake that occurred in Siheung city in 2010 occurred in an anticipated fault (aF) that developed in the north-south direction. In the western region of the Dongducheon Fault (≒5,500 m), the density boundary of the rock mass is deeper than that in the eastern region (≒4,000 m), suggesting that the tectonic movements of the western and eastern regions of the Dongducheon Fault is different. The maximum depth of the fracture zone developed in the Dongducheon Fault is about 6,500 m, and it is the deepest in the research area. It is estimated that the fracture zone extends to a depth of about 6,000 m for the Pocheon Fault, about 5,000 m for the Wangsukcheon Fault, and about 6,000 m for the Gyeonggang Fault.

• Journal of the Korean earth science society
• /
• v.40 no.6
• /
• pp.584-598
• /
• 2019

In this study, the effects of air-sea interactions on precipitation over the Seoul-Gyeonggi region of the Korean Peninsula from 28 to 30 August 2018, were analyzed using a Regional atmosphere-ocean Coupled Model (RCM). In the RCM, a WRF (Weather Research Forecasts) was used as the atmosphere model whereas ROMS (Regional Oceanic Modeling System) was used as the ocean model. In a Regional Single atmosphere Model (RSM), only the WRF model was used. In addition, the sea surface temperature data of ECMWF Reanalysis Interim was used as low boundary data. Compared with the observational data, the RCM considering the effect of air-sea interaction represented that the spatial correlations were 0.6 and 0.84, respectively, for the precipitation and the Yellow Sea surface temperature in the Seoul-Gyeonggi area, which was higher than the RSM. whereas the mean bias error (MBE) was -2.32 and -0.62, respectively, which was lower than the RSM. The air-sea interaction effect, analyzed by equivalent potential temperature, SST, dynamic convergence fields, induced the change of SST in the Yellow Sea. In addition, the changed SST caused the difference in thermal instability and kinematic convergence in the lower atmosphere. The thermal instability and convergence over the Seoul-Gyeonggi region induced upward motion, and consequently, the precipitation in the RCM was similar to the spatial distribution of the observed data compared to the precipitation in the RSM. Although various case studies and climatic analyses are needed to clearly understand the effects of complex air-sea interaction, this study results provide evidence for the importance of the air-sea interaction in predicting precipitation in the Seoul-Gyeonggi region.

• Mycobiology
• /
• v.50 no.6
• /
• pp.439-447
• /
• 2022

Two strains, YP344 and YP579 were isolated from soil samples in Pocheon City, Gyeonggi Province, South Korea. The strains YP344 and YP579 belong to the genus Vishniacozyma and Dioszegia, respectively. The molecular phylogenetic analysis showed that the strain YP344 was closely related to Vishniacozyma peneaus. Strain YP344T differed by four nucleotide substitutions with no gap (0.70%) in the D1/D2 domain of the LSU rRNA gene and 16 nucleotide substitutions with 8 gaps (5.76%) in the ITS region. On the other hand, the strain YP579^T varied from the type strain of the most closely related species, Dioszegia zsoltii var. zsoltii, by 6 nucleotide substitutions with four gaps (1.64%) in the D1/D2 domain of LSU rRNA gene and 26 nucleotide substitutions with 14 gaps (8.16%) in the ITS region. Therefore, the name Vishniacozyma terrae sp. nov. and Dioszegia terrae sp. nov. are proposed, with type strains YP344T (KCTC27988^T) and YP579^T (KCTC 27998^T), respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.2 s.109
• /
• pp.83-91
• /
• 2005

The purpose of this study is to analyze the arrangement of parks, in whole city level by using park's effective distance and to find the accessibility obstacles in case of using parks, in boundary of each parks' effective distance, so that to show how to improve communities' usage of city parks. The 8 cities in Gyeonggi-do and analysed the effective distance of parks. To find the accessibility obstacles in the boundary of parks' effective distance, 1) we choose 18 sample parks and extract obstacles - wide road, rail road, river- in interior and verify it by field survey and asking the park user's residents directly. The main findings of this study can be summarized as follows: First, Ansan city and Goyang city are only satisfied with the minimal city parks size standard, so that the rest 6 cities are lack of quantities which residents can use. The result of analyzing effective distance in whole city level, parks are mainly designated in new-town, so that most cities which have old-towns have very poor park systems to use. Because Ansan city is new-planned city, it is very effective arrangement in park systems exceptionally. Second, $96.2\%$ of park users' are living in the area which was easy to gain access not intercepted by wide road, rail road or river. Third, therefore at the stage of planning park, effective distance and resident's accessibility as well as park's supply quantitatively are needed to be considered. In addition, selection of location and elevation of resident's safety and accessibility through making a plan must be reflected. In the low accessibility area, the program to improve park's accessibility and amenity - like making small park or pocket park, linking parks with resident-friendly road etc.- has to be investigated.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.553-564
• /
• 2013

The core ingredient of traditional Korean style soy sauce is soy bean without any wheat or rice incorporated. National brands as well as regional micro-brewed companies constitute the soy sauce market in Korea. The present study investigated the physico-chemical and sensory properties of soy sauces produced by small-scale or mass-production. Additionally, the key physico-chemical parameters sufficiently representing the critical sensory characteristics have been identified. Ten types of soy sauce brewed by the Korean traditional method were selected for the study. Among these samples, seven types were brewed in small-scales in the Gyeonggi-do region whereas the other 3 types were mass-production products of major national brands. The total solid, reducing sugar, salinity, sugar content, amino nitrogen, CIELAB, acidity, and pH of soy sauce samples were measured for the physico-chemical analysis. A generic descriptive analysis was conducted to analyze the sensory characteristics of the samples using six trained panelists. The descriptive panel developed 21 sensory attributes. The data were statistically analyzed using ANOVA, PCA and PLSR. Overall, the micro-brewed products showed significantly higher value of salinity and acidity but lower content of reducing sugar than the mass-production products. The micro-brewed soy sauces elicited stronger fermented flavor, sourness, and bitterness whereas the national brand products elicited stronger alcoholic odor, sweetness and umami taste. Sugar content, acidity, and amino nitrogen showed strong relationships with fish sauce flavor, umami taste, and rich flavor. Salinity was closely related to the overall flavor intensity.

• Health Policy and Management
• /
• v.32 no.1
• /
• pp.73-93
• /
• 2022

Background: Appropriate physician workforce projection through reasonable discussions and decisions with a broad view on supply and demand of the workforce, thus, is very important for high-quality healthcare services. The study expects to provide preliminary research data on the workforce diagnosis standard model for Korean physician workforce policy decision through more flexible and objective physician workforce projection in reflection of diverse changes in healthcare policy and sociodemographic environments. Methods: A low flow rate through the causal map was developed, and an objective workforce demand projection from 2019 to 2040 was conducted. In addition, projections by scenarios under various situations were conducted with the low flow rate developed in the study. Lastly, the demand projection of the physician workforce by region of 17 cities and provinces was conducted. Results: First, demand of physicians in 2019 was 110,665, 113,450 in 2020, 129,496 in 2025, 146,837 in 2030, 163,719 in 2035, and 179,288 in 2040. Second, the scenario for the retirement of baby boomers led to a decrease in the growth rate due to time delay. Third, Seoul and Gyeonggi-do account for a high percentage of demand, a very high upward trend was identified in Gyeonggi-do, and as a result, the projection showed that the demand of the physician workforce in Gyeonggi-do would worsen over time. Conclusion: This study is meaningful in that rational and collective physician workforce supply and demand and its imbalance in workforce distribution were verified through various projections by scenarios and regions of Korea with System Dynamics.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.249-258
• /
• 2019

Purpose: The purpose of this study is to attain the correlation analysis and thereby to deduce the uniaxial compressive strength of rock specimens through the elastic wave velocity and the elastic modulus among the physical characteristics measured from the rock specimens collected during drilling investigations in Seoul and Gyeonggi region. Method: Experiments were conducted in the laboratory with 119 granite specimens in order to derive the correlation between the compressive strength of the rocks and elastic wave velocity and elastic modulus. Results: In the case of granite, the results of the analysis of the interaction between the compressive strength of a rock and the elastic wave velocity and elastic modulus were found to be less reliable in the relation equation as a whole. And it is believed that the estimation of the compressive strength by the elastic wave velocity and elastic modulus is less used because of the composition of non-homogeneous particles of granite. Conclusion: In this study, the analysis of correlation between the compressive strength of a rock and the elastic wave velocity and elastic modulus was performed with simple regression analysis and multiple regression analysis. The coefficient determination ($R^2$) of simple regression analysis was shown between 0.61 and 0.67. Multiple regression analysis was 0.71. Thus, using multiple regression analysis when estimating compressive strength can increase the reliability of the correlation. Also, in the future, a variety of statistical analysis techniques such as recovery analysis, and artificial neural network analysis, and big data analysis can lead to more reliable results when estimating the compressive sterength of a rock based on the elastic wave velocity and elastic modulus.