• Annals of Rehabilitation Medicine
• /
• v.42 no.6
• /
• pp.872-883
• /
• 2018

Objective To replace camera-based three-dimensional motion analyzers which are widely used to analyze body movements and gait but are also costly and require a large dedicated space, this study evaluates the validity and reliability of inertial measurement unit (IMU)-based systems by analyzing their spatio-temporal and kinematic measurement parameters. Methods The investigation was conducted in three separate hospitals with three healthy participants. IMUs were attached to the abdomen as well as the thigh, shank, and foot of both legs of each participant. Each participant then completed a 10-m gait course 10 times. During each gait cycle, the hips, knees, and ankle joints were observed from the sagittal, frontal, and transverse planes. The experiments were conducted with both a camera-based system and an IMU-based system. The measured gait analysis data were evaluated for validity and reliability using root mean square error (RMSE) and intraclass correlation coefficient (ICC) analyses. Results The differences between the RMSE values of the two systems determined through kinematic parameters ranged from a minimum of 1.83 to a maximum of 3.98 with a tolerance close to 1%. The results of this study also confirmed the reliability of the IMU-based system, and all of the variables showed a statistically high ICC. Conclusion These results confirmed that IMU-based systems can reliably replace camera-based systems for clinical body motion and gait analyses.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.214-222
• /
• 2019

Purpose: The purpose of this study is to develop a sprinkler head that can be controlled and initial suppressed by installing it in a rack-type warehouse. Method: Considering the spray radius and spray pattern, various deflectors were designed, and the spray angle, discharge characteristics and protection performance test was conducted, and these results were compared and analyzed. Results: An optimal sprinkler head was developed to protect full load, front side of a commodity with minimum water volume 115L/min. Conclusion: The developed head of K-115 and 1Bar pressure was tested with one tier storage confirming that the fire control is carried out without burning all the loadings. In addition, the vertical distance from the top of the load to the deflector shall be separated by 450mm and installed to allow sufficient discharge to the outer part of the commodity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1974-1979
• /
• 2018

Objective: This study compared fatty acid compositions and antioxidant activities of high-preference cuts (loin, tenderloin, and rib) and low-preference cuts (brisket, topside, and shank) of Hanwoo (Bos taurus coreanae) cows to obtain potentially useful information for promoting the consumption of various low-preference cuts. Methods: Individual 500 g samples of fresh beef were collected from each of the six cuts from 10 Hanwoo cows (quality grade 1) and immediately freeze-dried. The dried samples were evaluated for fatty acid composition, free radical scavenging activities (hydroxyl, alkyl, and 2, 2'-diphenyl-1-picrylhydrazyl [DPPH] radical), and antioxidative enzyme activities (glutathione peroxidase [GPx], glutathione-S-transferase [GST], and superoxide dismutase [SOD]). Results: The percentages of total polyunsaturated fatty acids were significantly higher in low-preference cuts than in high-preference cuts (p<0.05). Hydroxyl, alkyl, and DPPH radical scavenging activities were significantly higher in low-preference cuts than in high-preference cuts (p<0.05). In addition, the activities of antioxidant enzymes, such as GPx, GST, and SOD, were significantly higher in low-preference cuts compared with high-preference cuts (p<0.05). Conclusion: These results may influence consumers to include more low-preference cuts in their selections based on the nutritional facts, which could help to balance the beef market in South Korea.

• Journal of the Korean Society of Food Culture
• /
• v.33 no.6
• /
• pp.523-530
• /
• 2018

The purpose of this study was to develop a technology commercialization strategy by analyzing the consumer preference for low-sodium instant noodle ramen, which has a sodium content of 1,730 mg or less. For the commercialization of such low-sodium ramen, this study examined how much consumers would pay through an analysis of consumer preference by conjoint analysis. This study surveyed 1,004 men and women in their 20 s and 50 s between the ages of 20 and 50 years in Korea using an online survey. If the price of conventional instant noodle ramen is KRW 4,000 (approximately USD 3.57) per 5 packs for one pack of 5 servings in a supermarket, this study surveyed how much more they respondents would pay if the sodium was reduced by 10.0, 20.0, and 30.0%. The study found that if sodium was reduced by 10.0, 20.0, and 30.0%, the respondents would pay as much as KRW 4,180, KRW 4,307, and KRW 4,515, respectively. The attributes of low-sodium instant noodle ramen were examined according to the degree of sodium reduction, vegetable protein ingredients, brand, where to buy and price with each level. The Marginal Willingness To Pay (MWTP) was analyzed as follows. If the sodium content of ramen soup is reduced by 1.0%, the amount that can be paid would be KRW 105.78. Respondents could pay KRW 1,673 more for famous brand ramen than an unknown brand ramen. The study results indicated that when a new product is developed and released, it can be expected to increase sales of the new product by understanding the foreseeable value that consumers could pay for and realize the technological commercialization of the technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.687-699
• /
• 2020

The government-led top-down development approach for weapons system faces the problem of technological obsolescence now that technology has rapidly grown. As a result, the government has gradually expanded the corporate-led bottom-up project implementation method to the defense industry. The key success factor of the bottom-up project implementation is the ability of defense companies to plan their technologies. This paper presented a method of analyzing patent data through data mining technique so that domestic defense companies can utilize it for technology planning activities. The main content is to propose corporate selection techniques corresponding to the defense communication-electronics sectors and conduct principal component analysis and cluster analysis for the International Patent Classification. Through this, the technology was classified into four groups based on the patents of nine companies and the representative enterprises of each group were derived.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.13-19
• /
• 2021

BACKGROUND: Chemicals such as antibiotics and surfactants can enter agricultural environment and they can be degraded by natural processes such as photolysis. These chemicals exist in mixtures in the environment, but studies on degradation of the mixtures are limited. This study compares the photodegradation of Triton X-100 (TX) and antibiotics [tetracycline (TC) and sulfathiazole (STH)] when they are in a single solution or in mixtures. METHODS AND RESULTS: TC, STH, and TX solutions were exposed to UV-A for the photodegradation tests for 14 days. The residual TC, STH, and TX concentrations were analyzed by using HPLC. The TC degradation was similar regardless of the presence of TX, while the TX degradation was lower in the presence of TC. The STH degradation was similar regardless of the presence of TX, while the TX degradation was greater in the presence of STH. However, the STH degradation was slower in the TC-STH-TX mixture than in the STH-TX mixture. Also, the TX degradation was negligible in the TC-STH-TX mixture. The results show that the photodegradation of TC, STH, and TX can be different in mixtures. This can be attributed to the different emission and absorption wavelengths of each compound and interaction between these compounds and photoproducts. CONCLUSION: Overall, this study emphasizes that photodegradation of single chemicals and chemical mixtures can be different, and more studies on single compounds as well as mixtures are required to understand the fate of chemicals in the environment in order to manage them properly.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.451-465
• /
• 2021

In this investigation, electrochemical characteristics and damage behavior of 316L stainless steel polymer electrolyte membrane fuel cell(PEMFC) were analyzed by potentiodynamic and potentiostatic tests in cathode operating condition of PEMFC. As the result of potentiodynamic polarization test, range of passive region was larger than range of active region. In the result of potentiostatic test, damage depth and width, pit volume, and surface roughness were increased 1.57, 1.27, 2.48, and 1.34 times, respectively, at 1.2 V compared to 0.6 V at 24 hours. Also, as a result of linear regression analysis of damage depth and width graph, trend lines of damage depth and width according to applied potentials were 16.6 and 14.3 times larger, respectively. This demonstrated that applied potential had a greater effect on pitting damage depth of 316L stainless steel. The damage tendency values were 0.329 at 6 hours and 0.633 at 24 hours with applied potentials, representing rapid growth in depth direction according to the test times and applied potentials. Scanning electron microscopy images revealed that surface of specimen exhibited clear pitting damage with test times and applied potentials, which was thought to be because a stable oxide film was formed by Cr and Mo.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.257-270
• /
• 2021

Since African swine fever (ASF) spread to East Asia, a fatal crisis has occurred in the global pig industry, because Asia is dominant in pig production. Although some studies conducted bibliometric analysis on ASF, few studies compared research networks, and identified subthemes by major keywords. To fill this gap, this study identified the knowledge structure network of the research, its influence, and core research themes by utilizing the bibliometric analysis of 337 ASF-related journal articles over 50 years from 1970 to 2020 on the Web of Science. The result indicated that papers are mainly published in the fields of veterinary science, virology, microbiology, infectious disease and applied microbiology, and in particular, the fields of veterinary science and virology showed unrivaled weights as they account for 73.40%. With regard to cooperative relationships, European countries such as the UK, Germany, Italy, and Denmark, centered on Spain, are actively contributing to the ASF research. China, France, Thailand, Japan, Vietnam, and South Korea are leading research cooperation, centering on the United States. In the early stage of the studies, major keywords appeared to be related to outbreaks, quarantine and diagnosis, and in the middle stage, the keywords were expanded to a wide range of pig diseases. Recently, the keywords are becoming more diverse towards antibodies, cross-border transmission and disease monitoring. Based on data on major keywords related to ASF, this study proposed discussions and implications for activating ASF research including genotype, protein, vaccine, diagnosis, defense against infection and epidemiological investigation.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.446-450
• /
• 2021

Non-dispersive infrared (NDIR) gas sensors typically use an optical filter that transmits a discriminating 4.26 ㎛ wavelength band to measure carbon dioxide (CO2), as CO2 absorbs 4.26 ㎛ infrared. The filter performance depends on the transmittance and full width at half maximum (FWHM). This paper presents the fabrication, sensitivity, and selectivity characteristics of a distributed Bragg reflector (DBR)-based Fabry-Perot filter with a simple structure for CO2 detection. Each Ge and SiO2 films were prepared using the RF magnetron sputtering technique. The transmittance characteristics were measured using Fourier-transform infrared spectroscopy (FT-IR). The fabricated filter had a peak transmittance of 59.1% at 4.26 ㎛ and a FWHM of 158 nm. In addition, sensitivity and selectivity experiments were conducted by mounting the sapphire substrate and the fabricated filter on an NDIR CO2 sensor measurement system. When measuring the sensitivity, the concentration of CO2 was observed in the range of 0-10000 ppm, and the selectivity was measured for environmental gases of 1000 ppm. The fabricated filter showed lower sensitivity to CO2 but showed higher selectivity with other gases.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.250-254
• /
• 2021

A highly sensitive and selective non-dispersive infrared (NDIR) carbon dioxide gas sensor requires achieving high transmittance and narrow full width at half maximum (FWHM), which depends on the interface of the optical filter for precise measurement of carbon dioxide concentration. This paper presents the design, simulation, and fabrication of a Fabry-Perot filter based on a distributed Bragg reflector (DBR) for a low-cost NDIR carbon dioxide sensor. The Fabry-Perot filter consists of upper and lower DBR pairs, which comprise multilayered stacks of alternating high- and low-index thin films, and a cavity layer for the resonance of incident light. As the number of DBR pairs inside the reflector increases, the FWHM of the transmitted light becomes narrower, but the transmittance of light decreases substantially. Therefore, it is essential to analyze the relationship between the FWHM and transmittance according to the number of DBR pairs. The DBR is made of silicon and silicon dioxide by RF magnetron sputtering on a glass wafer. After the optimal conditions based on simulation results were realized, the DBR exhibited a light transmittance of 38.5% at 4.26 ㎛ and an FWHM of 158 nm. The improved results substantiate the advantages of the low-cost and minimized process compared to expensive commercial filters.