• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.58-63
• /
• 2008

It is essential to investigate the structure and the main characteristic of Home USN (Ubiquitous Sensor Network) technologies in built ubiquitous environment while designing bio-sensors. For this study, Thermistor elements and Thermopile black body have been selected to implement ubiquitous technologies for bio-sensors and wireless network such as WiBro has been used to transfer sensing data to the BSN (Bio-Sensor Network) gateway. It is certain that efficiency of ubiquitous space design is improved if main components of each specific sensor network are analyzed precisely in digital way and corresponding communication modules are prepared accordingly. Ubiquitous technology, in conclusion, has to be applied not only with systematical mechanism or electronic setting but in human-centered atmosphere as well, keeping with deep consideration for bio-housing service factors in eco-friendly surrounding.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.27-35
• /
• 2009

A paradigm of medical industry is changing quickly to u-healthcare according to entry toward an aging society and improvement of quality of life(QoL). The change toward u-healthcare is meaningful since meaning of healthcare is redefined by prevention and management instead of medical service such as diagnosis of disease and treatment. However, the interest about u-healthcare is only concentrated to derivation of new healthcare service, development of medical measurement appliances(Sensors), and integration and standardization of medical information. Therefore, in this paper, the main ai of this study is trying to realize and implement u-healthcare technology through primary philosophies of ubiquitous composition such as Disappear Computing, Invisible Computing, and Calm Computing and development of user-centered technology.

• Journal of the HCI Society of Korea
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2008

Recently researchers have studied mobile physiological sensing device. However, previous works focused on multiple and real time physiological sensing method, instead of aesthetic shape of sensing devices, sensing comfort during monitoring and sensing reliability against the hand motion artifact. In this work, we propose a stone shaped physiological sensing device to monitor the physiological status in a daily life which maximize the aesthetic feeling and sensing comfort and sensing reliability. We proposed stepwise user centered design process for user centric physiological sensing device and evaluated appropriate sensing positions against the hand motion artifacts and pressure from sensors. From the usability test and experiments, we verified the proposed sensing device provides the aesthetic appeals, sensing comfort and sensing reliability. We expect that this work can be applied in the various health care applications in near future.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.93-104
• /
• 2006

When the design profession started, design targets were mainly static hardware centered products. Due to the development of network and digital technologies, new products with dynamic and software-hardware hybrid interactive characteristics have become one of the main design targets. To accomplish the new projects, designers are required to learn new methods, tools and theories in addition to the traditional design expertise of visual language. One of the most important tools for the change is effective and rapid prototyping. There have been few researches on educational framework for interactive product or system prototyping to date. This paper presents a new model of educational contents and methods for interactive digital product prototyping, and it's application in a design curricula. The new course contents, integrated with related topics such as physical computing and tangible user interface, include microprocessor programming, digital analogue input and output, multimedia authoring and programming language, sensors, communication with other external devices, computer vision, and movement control using motors. The final project of the course was accomplished by integrating all the exercises. Our educational experience showed that design students with little engineering background could learn various interactive digital technologies and its' implementation method in one semester course. At the end of the course, most of the students were able to construct prototypes that illustrate interactive digital product concepts. It was found that training for logical and analytical thinking is necessary in design education. The paper highlights the emerging contents in design education to cope with the new design paradigm. It also suggests an alterative to reflect the new requirements focused on interactive product or system design projects. The tools and methods suggested can also be beneficial to students, educators, and designers working in digital industries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.477-479
• /
• 2017

With the recent advances in medical technology and health care, the prevention and treatment of diseases has developed. Accordingly aging has rapidly progressed. In this life span and aging society, demand for diagnostic centered medical care is increasing rapidly. In this paper, we propose a wearable patient check system based on FPGA that can be controlled by sensors. In the existing hospital, a doctor or nurse visited the patient every hour to check the condition. However, in this paper, patients, doctors and nurses can check the patient's condition at the desired time using patient check system. In addition, the tilt sensor is used for the patient who is uncomfortable to easily control. The proposed FPGA-based hardware architecture consists of an algorithm for enlarged image processing, a TFT-LCD Controller, a CIS Controller, and a Memory Controller to output the patient's status image. Implemented and validated using the DE2-115 test board with Cyclone IV EP4CE115F29C7 FPGA device and its operating frequency is 50MHz.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.127-132
• /
• 2021

The intravenous injection monitoring system used by medical institutions was developed to remotely provide patients with the amount of intravenous injected and the termination point of the injection. In order to measure the amount of intravenous injection input, the weight or flow rate of the level going out from the inside to outside of the intravenous injection can be observed with a measuring sensor. The criteria for devices that apply herein are accuracy and vigilance. In addition, it is compact and should be easy to use when installing intravenous injection on patients. In medical institutions, the accuracy of the measured values must be high, and economically inexpensive devices are required. In this study, low-cost small-weight-centered load cell sensors were applied, and algorithms were applied to reduce the artefact by external movement by converging with gyro sensors for accuracy of measurements. As a result, it was possible to reduce the error of measurement, thereby improving the accuracy of the intravenous injection monitoring measurement value.

• Science of Emotion and Sensibility
• /
• v.17 no.4
• /
• pp.89-100
• /
• 2014

Corporations continue to make a lot of efforts to provide more competitive services as the focus of industry is migrating from products to services. This study aims to shed new light on the potential values of the sense for service innovation through design and propose the workshop methodology for deriving sense-based product and service concepts. To this end, this study investigated the literatures related to the product and service innovation cases based on the conventional idea workshop and sense and also the value of sense. Moreover, it systematized the methodology that established the perspective of sense to the conventional idea workshop methodology. To verify the established methodology, this study extracted the elements to be modified and supplemented from the workshop methodology through the previous case studies. As a result of the study, it was possible to verify the validity as to the sense-based idea workshop methodology and reflect the opinions as to the improvement direction. Consequently, this study is regarded meaningful for proposing the approach of a new perspective as to the sense. Also, this study is deemed meaningful for proposing and verifying the specific idea workshop methodology for the approach hereof.

• Journal of Fashion Business
• /
• v.22 no.6
• /
• pp.94-104
• /
• 2018

The objective of this study was to develop a wearable systems that protect users, based on sensors that are easy to use, from accidents caused by harmful gases in the operator's poor working environment or the risk of ultraviolet rays during outdoor activities. By developing smart wappen with Light Emitting Diode (LED) light alarm function including UV sensor and gas sensor and central processing unit, systems that are applied to daily wear and work clothes to explore the possibility of user-centered, harmful environment monitoring products in real time were proposed. Each sensor was applied to sportswear and work clothes and the wappen system consisted of lightweight and thin form as a whole. Wappen to cover the device had one sheet cover on the front and another cover from the inside to form a sandwich like formation. Wappen was made in the same form as regular clothes that doesn't damage the exterior then a removable wappen system was developed using Velcro and snap methods to enable the separation of device or the exchange of batteries. De-adhesion method can occur in two ways, from the outside and from the inside, so the design is selected depending on the application. This study shows the significance of the development of sensor-based smart clothing, in that it presented a universal model for users.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.85-95
• /
• 2019

This work shows how to design a robot structure and to control to overcome obstacles while traveling through ducts of various diameters and shapes by three-legged robot. Circuits are centered in the body to connect the three wheel bodies that are driven around the center body with the 4-section slider link structure. Also, the springs are used to contract and expand the robot legs so that it can be caparable of various environments. Geared motor, spring, and belt were selected based on the static and dynamic calculation to be suitable to horizontal and vertical travels. The center body is equipped with a camera and the distance sensors, and a control algorithms are implemented so that it can be successfully performed in L-type and T-type ducts. Using UWB modules and trilateration algorithm, the location of the duct-cleaning robot inside the duct could be identified successfully.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.43-49
• /
• 2024

The convergence of education and technology has been emphasized, leading to the application of educational technology (EdTech) in the field of education. EdTech provides learner-centered, customized learning environments through various media and learning situations. In this paper, we designed hardware for EdTech-based educational tools for IoT security education in the field of cybersecurity education. The hardware is based on a dual microcontroller unit (MCU) within a single board, allowing for both attack and defense to be performed. To leverage various sensors in the Internet of Things (IoT), the hardware is modularly designed. From an educational perspective, utilizing EdTech in cybersecurity education enhances engagement by incorporating tangible physical teaching aids. The proposed research suggests that the design of IoT security education hardware can serve as a reference for simplifying the creation of a security education environment for embedded hardware, software, sensor networks, and other areas that are challenging to address in traditional education..