• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.119-124
• /
• 2004

A new control method of spindle induction motor drive is proposed in this paper. In a conventional control method, the vector control was employed in the low speed range, while the constant V/f(volt-per-hertz) PWM control was employed in the high speed range. The two control modes were automatically selected at an intermediate speed. In a proposed control method, the direct vector-control with an encoder is employed in the low speed range(from 0 to 8,000rpm), and the vector control without an encoder is employed in th high speed(from 8,000 to 15,000rpm) by using flux observer and speed estimator. This paper describes problem of control method in a conventional spindle induction motor drive and proposes contort method as variation of motor speed.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.647-659
• /
• 2010

This paper presents a part of North Africa/Europe collaboration results in education to develop project-oriented courses in power electronics and motor drive field. The course aims to teach Permanent Magnet motor drives close to a real world project of significant size and depth so as to be motivational, namely mobile robot project. Particular skills, student will acquire, are those relative to the detailed design and implementation of PM motor controllers in DSP based rapid prototyping environment. Simulation work is completed using graphical modeling tools in Simulink/Plecs, while real-time implementation is achieved by means of eZdspF2812 board and Simulink/TI C2000 Embedded Target tools. This flexible development environment fit the robot traction system very well and provides exactly the functionality necessary for an efficient PM motor drives teaching as demonstrated by a set of simulation and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.195-197
• /
• 2005

This paper is proposed adaptive fuzzy neural network(AFNN) and artificial neural network(ANN) based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed control and estimation of speed of induction motor using fuzzy and neural network. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed. so that the actual state variable will coincide with the desired one. This paper is proposed the experimental results to verify the effectiveness of the new method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.897-899
• /
• 2002

BLDCM(Brushless D.C. Motor) is widely used industrial application because of high efficiency and high power density. Especially, In servo system and home appliance, BLDCM is very useful due to high control performance and low acoustic noise. In this paper, 2.5HP rated BLDCM controller and drive was developed for tread mill application. The prototype BLDCM has 4 poles rotor and 24 slots stator. Ferrite was used as a rotor magnet due to the cost and temperature characteristic. For the stable operation of tread mill, over current and high temperature can be detected by the DSP control1er. For the commutation signal, switching patterns from the sensorless circuit and hall sensor signal are used in the DSP controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.241-242
• /
• 2016

본 논문에는 매입형 영구자석 전동기(Interior Permanent Magnet Synchronous Motor, IPMSM)의 회전행렬을 이용한 고주파 신호주입 센서리스 구동 시 회전자 위치 오차 추정 성능 향상을 위한 새로운 인덕턴스 추정방법을 제안하였다. 회전행렬을 이용한 회전자 위치 오차 추정 방법은 위치 오차의 넓은 추정 범위 및 선형성을 만족하는 장점이 있으나 모델 기반 인덕턴스를 사용하기 때문에 실제 인덕턴스 값과 차이가 있을 시 추정된 위치 오차가 부정확 할 수 있다. 따라서 정확한 위치 오차를 구하기 위해 본 논문은 오프라인 상황에서 인덕턴스를 추정하는 새로운 방법을 제시하였으며 모의 실험으로 제안한 방법을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.167-168
• /
• 2013

신호 주입 센서리스 구동 시, 인버터의 비선형성으로 인한 주입 전압 왜곡현상은 전류 신호 정보의 SNR을 떨어뜨리게 된다. 이로 인하여 회전자 위치를 추정하는 과정에서 오차가 발생하는 문제점이 발생한다. 본 논문에서는 인버터의 비선형성이 주입 전압에 미치는 영향을 분석하고, 전류 신호 정보의 SNR을 개선하기 위하여 고주파 전류 맥동의 크기를 일정하게 제어하는 주입 전압을 인가하는 방법을 제안한다. 실험을 통하여, 제안된 방법의 성능을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1105-1110
• /
• 2011

본 논문은 신경회로망 기법을 이용하여 직접벡터제어 방식의 문제점을 개선하고자 하였다. 직접벡터제어 방식은 히스테리시스 밴드 폭의 변화로 인해 유도전동기 속도제어 시 맥동이 큰 단점을 가지고 있다. 이러한 문제점을 학습을 통해 오차를 감소시키는 신경회로망 기법을 사용하여 기존의 직접벡터제어 방식에서 발생하던 속도 맥동을 개선하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-247
• /
• 2003

This paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. A minimum order state observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A minimum order state observer is implemented to compute the speed and Position feedback signal. The validity of the proposed sensorless scheme is confirmed by various response characteristics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.417-420
• /
• 2000

In order to the torque control the indirect flux control was performed by controlling the ratio of e/f and the q-axis flux was estimated by the slip command and q-axis flux was estimated by the slip command and q-axis current in the rotor circuits. Also the frequency was controlled to keep on the q-axis flux to be zero and the constant torque characteristics could be obtained by generation the preset torque. In the induction motor driven by the boltage source inverter with the constant voltage and frequency the speed variation is expressed as a slip So the speed control can be achieved by slip compensation The slip was calculated with a q-flux current filtered by first-order filter and as the result the error problem which may occur in current detection was eliminated