• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.277-280
• /
• 2001

This paper presents a speed sensorless implementation of digital speed control system of Surface Permanent-Magnet Synchronous Motor(SPMSM) drives with a direct torque control(DTC). The system presented are stator flux and torque observer of stator flux feedback control model that inputs are current and voltage sensing of motor terminal with estimated rotor angle for a low speed operating area, two hysteresis band controllers, an optimal switching look-up table, rotor speed estimator, and IGBT voltage source inverter by using fully integrated control software. The developed speed sensorless control system are shown a good motion control response characteristic results and high performance features using 1.0Kw purposed servo drive SPMSM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.71-74
• /
• 2003

The paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. A minimum order state observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A minimum order state observer is implemented to compute the speed and position feedback signal. The validity of the proposed sensorless scheme is confirmed by various response characteristics.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.923-924
• /
• 2006

For the interior permanent magnet synchronous motor(IPMSM) drive to operate above the base speed in the constant horsepower region, field weakening control is applied. However, the field weakening control was not almost applied to sensorless control of the interior permanent magnet synchronous motor. In this parer, field weakening control is applied to the sensorless control of IPMSM based on an instantaneos reactive power. The effectiveness of the Proposed system is verified by the experimental results.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.33-35
• /
• 2005

We propose an improved sensorless drive method of Switched Reluctance Motors using impressed voltage pulses. Conventional impressed voltage pulse method has a problem of phase delay because of low -pass filter. So In this paper we propose an unproved sensorless driving method based on the impressed voltage pulse using new phase-shift circuit technique that overcomes the phase delay and start-up problem.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.978-980
• /
• 2000

Sensorless PMSM is much studied for the industrial applications and home appliances because, a mechanical sensor reduces reliability and increases cost. Two types of instantaneous torque controls are basically used for high performance variable-speed a.c. drive : vector control and direct torque control. This paper investigates speed sensorless control of PMSM using direct torque control. The switching of inverter is determined from SVPWM realizing the command voltage which is obtained by flux error and measured current without d-q transformation. The rotor speed is estimated through adaptive observer with feedback loop. The simulation and experimental results indicate good performances.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.385-387
• /
• 1999

Brushless DC Motors are widely used because of their high power ratio and easy control. But the brushless DC Motors need rotor Position- and speed- sensor such as encoder, resolver and hall sensor. The position sensor has present several disadvantages from the standpoint of drive cost, machine size and reliability. Hall sensors are used generally because of low cost but their operating temperature is limited up to $75^{\circ}C$ because of sensitivity of temperature. Now a day many research projects are on the development of sensorless brushless DC motors to correct these disadvantages. In this paper, characteristics such as starting, change of speed and load of a sensorless brushless DC motor are investigated.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.926-928
• /
• 2004

For the permanent magnet synchronous motor(PMSM) drive to operate above the base speed in the constant horsepower region, field weakening control is applied. But field weakening control was not almost applied to sensorless control of the permanent magnet synchronous motor. In this paper, field weakening control is applied to the sensorless control of PMSM based on an instantaneos reactive power. And the effectiveness of the proposed system is verified by the experimental results.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.117-123
• /
• 2009

This paper presents a sliding mode observer for the sensorless control of interior permanent magnet synchronous motor (IPMSM) drives. The sliding mode observer has been presented as a robust estimation method. Most of these previous works, however, were not for an interior PMSM (IPMSM), but for a non-salient pole PMSM and its observer design is conducted in the stationary reference frame. Thus, in this paper, we investigate the design of a sliding mode observer and its driving characteristics for an IPMSM. The proposed sliding mode observer is designed in the rotating reference frame, and good drive performance is achieved even when the observer parameters are mismatched with those of an actual motor. The proposed method is applied to a 600W IPMSM, and, then, the measurement results are presented.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.49-50
• /
• 2014

본 논문에서는 유도형 활공 탄약의 비행경로 제어와 자세유지를 위해 장착된 꼬리 날개 구동을 위한 BLDC 전동기 제어시스템을 개발하였다. 이 시스템에서는 높은 고도에서의 비행 시 압력에 취약한 홀(Hall) 센서와 같은 회전자의 위치 검출 센서를 사용하지 않는 센서리스(Sensorless) 구동 방식을 적용하였다. 측정된 극전압으로부터 상전환 신호를 추출하여 BLDC 전동기의 센서리스 구동을 실현하였으며, 또한 상전환 신호로부터 추정된 속도를 사용하여 속도 제어를 통해 꼬리날개의 변위 명령 추종을 위한 위치 제어를 수행하였다. 실제 구현된 시스템에서의 실험을 통해 개발된 센서리스 제어 알고리즘을 적용하여 위치 제어의 성능이 우수함을 확인하였다.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.543-551
• /
• 2019

Permanent Magnet Synchronous Motors(PMSMs) have a wider range of applications due to their high output density and high efficiency. PMSMs are used not only in high-power density, high-performance motor-driven systems such as vehicle and robots, but also in systems where cost-cutting is very important, such as washing machines, air conditioners and refrigerators. To reduce costs, position sensorless control is required, which is generally difficult to be used under conditions of starting the motor. Thus, the I-F speed control that rotates the current vector at any speed in the starting procedure should be used at first, and then the sensorless speed control could be applied after PMSM rotates above a certain speed. Speed control performance in I-F speed control and sensorless speed control is very important. And more speed control performance should be maintained even in the transient in which the two control techniques are changed. In this paper, the speed controller transition method from I-F speed control to sensorless speed control of permanent magnet synchronous motor is proposed. Experiments were carried out on the washing machine drive system to verify the performance of the proposed technique.