• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.150-154
• /
• 2005

This paper is presented for the development of the brushless DC(BLDC) spindle motors for hard disk drives. A new BLDC Motor has the use of insulated, compacted, iron powder for the armature core material of BLDC motors. Insulated iron powder in this paper is generally called soft magnet composite(SMC). The SMC is used for the stator of the motor instead of the laminated steel core. The motor used by SMC can have the good advantages in condition of the high frequency input power and small sized motor. It gets much more high efficiency than laminated steel core at same input power. The proposed motor has a technique of speed sensorless control. Experimental results show the performance of the proposed BLDC spindle motors for an HDD.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.61-68
• /
• 2012

본 논문에서는 리니어 컴프레서를 위한 폐루우프 센서리스 스트로크 제어시스템이 구성되었다. 피스톤 위치를 정확히 알아내기 위해 모터 매개변수를 피스톤 위치와 모터 전류의 함수로 추정하였다. 이 매개변수 데이터는 ROM 테이블에 저장한 뒤 차 후 피스톤 위치를 정확히 알아내는데 사용된다. 또한, 추정된 전동기 매개변수의 데이터 크기를 줄이기 위해 여러 형태의 곡면 함수로 근사화 하는 작업을 수행하였고, 공간분할을 통해 추정오차를 줄일 수 있었다. 곡면함수의 차수와 공간분할의 개수가 매개변수의 추정오차와 연산시간에 미치는 영향을 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1117-1119
• /
• 2003

기존의 사다리꼴형 브러시리스 직류 전동기(BLDCM)의 센서리스 제어는 전류전환 시점을 알기 위하여 홀 센서 대신 단자 전압과 중성점 전압을 이용한다. 하지만, 속도 제어를 위해서는 엔코더나 레졸바와 같은 센서를 사용해야한다. 2극기 BLDC 모터의 경우 단자전압을 이용한 위치정보는 모터 한 회전 당 12번의 신호가 출력된다. 엔코더 혹은 레졸바를 제거하고, 이 신호를 이용하여 속도 정보를 만들 경우, 속도를 만들기 위한 위치 정보의 펄스 간격이 넓게 되어 순시 속도를 만들지 못하게 된다. 이로 인하여 실제 속도의 변화를 민감하게 추정하지 못하게 된다. 따라서 이렇게 만들어진 속도 정보는 실제 시스템에서 사용할 수 없게 된다. 이러한 문제를 해결하려고 본 논문에서는 순시 속도 관측기를 사용한다 단자전압과 중성점 전압에 의한 위치정보를 가지고 순시 속도 관측기를 속도 제어 주기보다 빠르게 갱신함으로써 순시 속도를 예측한다. 또한 이 순시 속도는 속도 제어기로 피드백 되어 속도 센서리스를 실현한다. 이에 대한 타당성은 시뮬레이션을 통해 검증한다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.647-659
• /
• 2010

This paper presents a part of North Africa/Europe collaboration results in education to develop project-oriented courses in power electronics and motor drive field. The course aims to teach Permanent Magnet motor drives close to a real world project of significant size and depth so as to be motivational, namely mobile robot project. Particular skills, student will acquire, are those relative to the detailed design and implementation of PM motor controllers in DSP based rapid prototyping environment. Simulation work is completed using graphical modeling tools in Simulink/Plecs, while real-time implementation is achieved by means of eZdspF2812 board and Simulink/TI C2000 Embedded Target tools. This flexible development environment fit the robot traction system very well and provides exactly the functionality necessary for an efficient PM motor drives teaching as demonstrated by a set of simulation and experiments.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.364-371
• /
• 2021

A magnetic flux saturation model of Synchronous Reluctance Motors (SynRMs) and a parameter estimation method are proposed at standstill. The proposed magnetic flux model includes the nonlinear relationship between the current and the magnetic flux for self-saturation and cross-saturation. Voltage is injected at standstill to estimate the magnetic flux saturation model. Voltages are injected into the d-axis and q-axis to obtain data on self-saturation. Subsequently, voltages are simultaneously injected into the d-q axis to obtain data on cross-saturation. On the basis of the measured current and the calculated magnetic flux, the parameters of the proposed model are estimated using the least square method (LSM). Simulation and experiment were performed on a 1.5-kW SynRM to verify the proposed method. The proposed model can be used to create a high-efficiency operation table, a sensorless algorithm, and a current controller to improve the control performance of a motor.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.362-373
• /
• 2016

The on-line measurement of high-power IGBT collector current is important for the hierarchical control and short-circuit and overcurrent protection of its driver and the sensorless control of the converter. The conventional on-line measurement methods for IGBT collector current are not suitable for engineering measurement due to their large-size, high-cost, low-efficiency sensors, current transformers or dividers, etc. Based on the gate driver, this paper has proposed a current measuring circuit for IGBT collector current. The circuit is used to conduct non-intervention on-line measurement of IGBT collector current by detecting the voltage drop of the IGBT power emitter and the auxiliary emitter terminals. A theoretical analysis verifies the feasibility of this circuit. The circuit adopts an operational amplifier for impedance isolation to prevent the measuring circuit from affecting the dynamic performance of the IGBT. Due to using the scheme for integration first and amplification afterwards, the difficult problem of achieving high accuracy in the transient-state and on-state measurement of the voltage between the terminals of IGBT power emitter and the auxiliary emitter (u_Ee) has been solved. This is impossible for a conventional detector. On this basis, the adoption of a two-stage operational amplifier can better meet the requirements of high bandwidth measurement under the conditions of a small signal with a large gain. Finally, various experiments have been carried out under the conditions of several typical loads (resistance-inductance load, resistance load and inductance load), different IGBT junction temperatures, soft short-circuits and hard short-circuits for the on-line measurement of IGBT collector current. This is aided by the capacitor voltage which is the integration result of the voltage uEe. The results show that the proposed method of measuring IGBT collector current is feasible and effective.