• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권3호
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.146-153
• /
• 2002

this paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The problem of DTC for high-dynamic performance RSM drive is generating a nonlinear torque due to a saturated nonlinear inductance curve with various load currents. The control system consists of stator flux observer, compensating inductance look-up table, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source unverter, and TMS320C31 DSP controller. The stator flux observer is based on the combined voltage and current model with stator flux feedback adapitve control that inputs are the compensated inductances, current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operation area. It does not requrie the knowledge of any montor paramenters, nor particular care for moter starting, In order to prove the suggested control algorithm, we have simulation and testing at actual experimental system. The developed sensorless control system is showing a good speed control response characterisitic result and high performance features in 20/1500 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2203-2205
• /
• 2003

In this thesis, it is a purpose to carry out speed control of DC servo motor without using encoder and the resolver which are speed sensor of DC servo motor and it should use estimate algorithm or observer and must assume a speed in order to control speed sensorless. Therefore, high gain observer was designed to estimate rotor speed of DC servo motor and it carries out speed control from the feedback of the speed that assumed done in the thesis. Also, implementation used easy PI controller in speed-controller of DC motor though it was simple. It is compared estimate performance of Luenberger and high gain observer in a way of computer simulation in order to verify performance of the high gain observer which proposed in this thesis, and proved excellency of the high gain observer. And the thesis proved that smooth speed sensorless control of DC servo motor was implemented in invariable driving.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1614-1622
• /
• 2014

A novel equivalent flux sliding-mode observer (SMO) is proposed for dual three-phase interior permanent magnet synchronous motor (DT-IPMSM) drive system in this paper. The DT-IPMSM has two sets of Y-connected stator three-phase windings spatially shifted by 30 electrical degrees. In this method, the sensorless drive system employs a flux SMO with soft phase-locked loop method for rotor speed and position estimation, not only are low-pass filter and phase compensation module eliminated, but also estimation accuracy is improved. Meanwhile, to get the regulator parameters of current control, the inner current loop is realized using a decoupling and diagonal internal model control algorithm. Experiment results of 2MW-level DT-IPMSM drives system show that the proposed method has good dynamic and static performances.

• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.216-222
• /
• 2017

The rotor position of a PM synchronous motor is commonly estimated from the mathematical model for the sensorless control without rotor position sensors. For the magnet flux-based rotor position estimator in the stationary reference frame, the magnet flux estimator for estimating rotor position and speed includes the integrator. The integrator in the magnet flux estimator may accumulate the offset of the current sensors and the voltage drift. This continuous accumulation of the offset may cause the drift and overflow in the integrator, such that the estimated rotor position and speed may fail to track the real rotor position and speed. In this paper, the magnet flux estimator without integrator is proposed to avoid overflow in the integrator. The proposed rotor position and speed estimator based on magnet flux estimator are verified through simulation and experiment.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.336-343
• /
• 2008

본 논문에서는 병렬형 칼만 필터를 사용한 영구 자석 동기 전동기의 새로운 센서리스 제어 기법이 제안되었다. 제안된 기법은 기존의 확장형 칼만 필터(EKF)와는 달리 reduced-order EKF를 이용한 역기전력 추정 알고리즘을 통해 회전자 위치와 속도를 추정할 수 있고, 각각의 샘플링 시간마다 서로 다른 EKF를 실행하는 병렬형 구조를 사용함으로써 연산시간을 월등히 줄일 수 있다. 따라서 제안된 기법은 기존 EKF의 장점은 그대로 유지하며 단점으로 지적되었던 긴 연산시간 문제를 극복하고 쇄교 자속 값에 민감한 부분도 부분적으로 해결할 수 있다. 또한 운전 영역에 따라 그 형태를 달리함으로써 회전자 속도 및 위치를 안정적으로 추정할 수 있다. 제안된 기법은 실험 결과를 통하여 그 타당성이 검증되었고, 기존 EKF와의 연산 시간 비교를 통하여 우수성이 확인되었다.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.266-273
• /
• 2011

본 논문에서는 매입형 영구자석 동기 전동기(IPMSM)의 확장형 역기전력(EEMF) 모델을 이용한 저감차수 병렬형 확장형 칼만 필터(EKF)를 이용한 센서리스 제어 기법을 제안한다. 제안된 센서리스 제어 기법은 간단한 수학적 구조로 매입형 영구자석 동기전동기 구동에 적합한 확장형 역기전력 모델을 이용하여 두 개의 저감 차수 형태로 표현하였다. 이러한 두 모델은 매 샘플링 시간마다 확장형 칼만 필터에 번갈아 연산된다. 행렬의 차수를 저감하여 EKF의 연산시간의 단축과 알고리즘 구현의 부담을 줄였으며 센서리스 제어의 안정적인 상태 벡터의 추정을 위해 병렬로 구동하는 두 모델에 의해 추정된 정보를 이용하였다. 제안된 기법은 실험 결과를 통하여 안정적인 위치 추정 및 속도 추정 성능을 검증 하였으며, 전 차수 EKF와의 연산 시간 비교를 통하여 우수성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.240-243
• /
• 2003

Sensorless Vector control of the permanent magnet synchronous motor(PMSM) typically requires knowledge of the PMSM structure and parameters, which in some situations are not readily available or may be difficult to obtain. In this paper, by measuring the currents of the PMSM drive, a neural-network-based rotor position and speed estimation method for PMSM is described. Because the proposed estimator treats the estimated motor speed as the weights, it is possible to estimate motor speed to adapt back propagation algorithm with 2 layered neural network. The proposed control algorithm is applied to PMSM drive system. The operating characteristics controlled by neural networks control are examined in detail.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1092-1099
• /
• 2006

본 논문에서는 유도전동기를 인버터와 같은 전력변환장치를 사용하여 정상상태의 동작특성은 물론 과도특성까지 해석하기 위해서는 유도전동기와 부하를 포함하는 전체 시스템의 정확한 동적 모델링을 이용하여 시스템 방정식으로 표현해야 한다. 또한 최대 견인력 제어를 위해서 속도센서리스벡터제어와 부하 토크 외란 관측기를 통하여 점착력 계수를 추정한다. 이와 같은 시스템의 제어 알고리즘을 구현하기 위하여 철도 모의 장치를 이용하여 제안된 알고리즘을 시뮬레이션과 실험을 통하여 확인하고, 철도 차량의 속도 가감에 따른 공전속도에 대한 점착력의 관계 등 제반 사항을 모의 장치에 의해서 구현하였다.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.157-164
• /
• 2000

This paper presents a method to detect a rotor position and to drive a BLDC motor from standstill to medium speed without any position sensor comparing the current responses due to the inductance variation in the rotor position. A rotor position at a standstill is identified by the current responses of six pulses injected to each phase of a motor. Once the motor stars up pulse train that is composed of long and short pulses is injected to the phase corresponding to produce the maximum torque and the next phase continuously. it provides not only the torque but also the information of the next commutation time effectively when the response of long and short pulses crosses each other after the same time delay. This method which is verified experimentally using a DSP can drive a BLDC motor to the medium speed smoothly without any rattling and time delay compared with the conventional sensorless algorithm.