• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1676-1677
• /
• 2007

본 논문에서는 유비쿼터스 환경 구성을 위해 필수불가결한 센서노드인 Sensor Platform을 설계하고 제작하였다. 개발된 Sensor Platform은 상위로는 Ethernet 통신, 하위로는 여러 가지 센서와의 다양한 인터페이스를 제공한다. 개발된 Sensor Platform을 사용한 예를 보이고 그 타당성을 보였다.

• Korean Journal of Geomatics
• /
• 제4권1호
• /
• pp.31-37
• /
• 2004

The aim of this research is comparing the existing approximation models (e.g. Affine Transformation and Direct Linear Transformation) with Rational Function Model as a substitute of rigorous sensor model of linear array scanner, especially push-broom sensor. To do so, this research investigates the mathematical model of each approximation method. This is followed by the assessments of accuracy of transformation from object space to image space by using simulated data generated by collinearity equations which incorporate or depict the physical aspects of linear array sensor.

• 센서학회지
• /
• 제32권1호
• /
• pp.51-54
• /
• 2023

We investigated a humidity sensor based on a polyimide-coated side-polished optical fiber. The polyimide film absorbed moisture, causing the resonant wavelength of the sensor to shift to a longer wavelength owing to the changes in the optical properties of the film. The experimental results showed that the resonant wavelength of the device shifted by 17-18 nm when relative humidity changed from 30% to 90%.

• 한국방재안전학회논문집
• /
• 제7권2호
• /
• pp.1-8
• /
• 2014

급경사지 계측에 활용을 위하여 GNSS와 TRS센서를 주축으로 하여 전원, 통신 등의 부대설비, 그리고 변위 추출 및 가시화 등의 데이터처리 소프트웨어를 개발하여 스마트폴 계측시스템을 구축하였다. 본 연구에서 개발한 스마트폴 계측센서의 개념은 GNSS안테나 바로 밑에 TRS센서 및 자이로(gyro) 센서 등, 그리고 하단에 함수비센서를 장착하여 실시간으로 지표변위는 물론, 지반의 병진, 활동, 침하 등의 세가지 요인을 추출해 내고 함수비를 추출하여 전송할 수 있도록 하였다. 스마트폴 계측시스템은 데이터 수신부, 데이터 수집 및 전송부, 데이터 처리부로 구분하여 각 부분별 기능을 발휘할 수 있도록 구축한 다음, 현장적용성 평가를 위해 인위적 변위를 도입한 시험계측을 실시하고 그 결과를 분석하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.791-793
• /
• 2016

각종 센서 기술의 발달로 일반 사용자들이 스마트폰, 콘솔게임기(닌텐도 Wii)와 같은 동작인식 장치를 접해 볼 수 있는 환경이 증가하면서 동작인식 기반 입력장치에 대한 사용자 니즈가 증가하는 추세이다. 기존 동작인식 마우스는 외부에 마우스 버튼이 변형 된 형태로 장착되어 마우스 좌,우 버튼과 휠 역할을 하며, 내부에는 가속도센서(또는 자이로센서 포함)를 장착하여 마우스 커서 역할을 담당하고 있고, 소형으로 제작이 되어 버튼을 조작하는데 어려움이 있으며, 동작인식 기술을 커서의 포인팅에만 사용되어 동작인식 기술을 적용에는 한계가 있다. 이에 본 논문에서는 MEMS 기반 모션 레코그니션 센서(Motion Recognition Sensor)를 이용, 인체의 2지점(엄지와 검지)의 동작을 인식하여 동작데이터를 생성하고 이를 기초로 하여 사전 결정된 매칭테이블(커서이동 및 마우스 버튼 이벤트)과 비교, 판단하여 제어신호를 생성하고, 생성된 제어신호를 무선 송신하는 컴퓨터 입력장치에 관해 연구하였다.

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.113-119
• /
• 2020

사물인터넷 기반의 센서네트워크는 저렴한 비용으로 효율적으로 교량 등의 시설물 유지관리에 적용할 수 있는 한 방안이다. 본 연구에서는 사물인터넷 통신의 하나인, LoRa LPWAN 기반으로 교량 구조건전성모니터링을 위한 시스템을 개발하기 위해서 케이블 장력 모니터링을 위한 센서보드, 기존 계측 센서들과 함께 센서네트워크를 구축하기 위한 DAQ 보드, 데이터들 처리하고 LoRa 통신을 위한 스마트센서노드를 설계 및 제작하였으며 모니터링을 위한 센서네트워크를 구축하였다. 또한 본 시스템의 성능검증을 위해 영광대교에 Test Bed를 구축하여 교량 구조건전성 모니터링을 위한 센서네트워크에 적용가능성 여부를 살펴보았다. Test Bed 검증 결과 LoRa LPWAN 기반 센서네트워크는 데이터 전송률, 정확도, 경제성면에서 교량 구조 건전성 모니터링의 기술 중에 하나로 적용될 수 있으며, 향후 교량구조물 뿐만 아니라 다양한 공공기반 시설물에 유지관리를 위한 시스템으로 보급될 수 있기를 기대한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

• 센서학회지
• /
• 제30권5호
• /
• pp.342-348
• /
• 2021

For the characterization or failure analysis of electronic devices such as PCB (printed circuit boards), the most common method is the measurement of voltage waveforms with an oscilloscope. However, because there are many types of problems that cannot be detected by voltage waveform analysis, several other methods such as X-ray transmission, infrared imaging, or eddy current measurement have been applied for these analyses. However, these methods have also been limited to general analyses because they are partially useful in detecting physical defects, such as disconnections or short circuits. Fundamentally current waveform measurements during the operation of electronic devices need to be performed, however, commercially available current sensors have not yet been developed, particularly for applications in highly integrated PCB products with sub-millimeter fine pitch. In this study, we developed a highly sensitive PHR (planar hall resistance) magnetic sensor for application in highly integrated PCBs. The developed magnetic sensor exhibited sufficient features of an ultra-small size of less than 340 ㎛, magnetic field resolution of 10 nT, and current resolution of 1 mA, which can be applicable for PCB analyses. In this work, we introduce the development process of the magnetic sensing probe and its characteristic results in detail, and aim to extend this pin-type current probe to applications such as current distribution imaging of PCBs.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1059-1065
• /
• 2020

Demand for pressure sensors is increasing in various fields such as machinery, healthcare and medical care. A recent study is being conducted to create sensors that are more sensitive and have longer linear sections based on measurement principles. In this paper, a film-type sensor with a membrane structure was developed to measure the pressure distributed in the axial direction of a hot roll laminator. Performance of sensors was evaluated by resistance and durability according to membrane diameter. The resistance of the membrane sensor varies according to the contact state and contact area of the electrode. Therefore, the membrane diameter selection is important. Experiments showed the most pronounced variation in resistance under pressure at 8 mm in diameter of membrane. Reliability evaluation of sensors was carried out at room temperature and high temperature. The pressure on the sensor was pressurized 1000 times to measure the initial resistance and the resistance after the evaluation to analyze the change. Sensors showed stable results with low resistance changes of 5.15% and 6.27%, respectively. A large area sensor manufactured using the developed sensor also showed reliable results.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.716-722
• /
• 2016

Coordinate estimation is an essential function for autonomous navigation of a mobile robot. The optical mouse sensor is convenient and cost-effective for the coordinate estimation problem. It is possible to overcome the position estimation error caused by the slip and the model mismatch of robot's motion equation using the optical mouse sensor. One of the simple methods for the position estimation using the optical mouse sensor is integration of the velocity data from the sensor with time. However, the unavoidable noise in the sensor data may deteriorate the position estimation in case of the simple integration method. In general, a mobile robot has ready-to-use motion information from the encoder sensors of driving motors. By combining the velocity data from the optical mouse sensor and the motion information of a mobile robot, it is possible to improve the coordinate estimation performance. In this paper, a coordinate estimation algorithm for an autonomous mobile robot is presented based on the well-known Kalman filter that is useful to combine the different types of sensors. Computer simulation results show the performance of the proposed localization algorithm for several types of trajectories in comparison with the simple integration method.