• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

As the new requirements for wireless sensor networks are emerging, real-time communications is becoming a major research challenge because resource-constrained sensor nodes are not powerful enough to accommodate the complexity of the protocol. In addition, an efficient energy management scheme has naturally been a concern in wireless sensor networks for a long time. However, the existing schemes are limited to meeting one of these two requirements. To address the two factors together, we propose real-time communications with two approaches, a protocol for satisfied conditions and one for unsatisfied. Under the satisfied requirement, existing real-time protocol is employed. On the other hand, for the unsatisfied requirement, the newly developed scheme replaces the existing scheme by adjusting the transmission range of some surplus nodes. By expanding the transmission range, the end-to-end delay is shortened because the number of intermediate nodes decreases. These nodes conserve their energy for real-time communications by avoiding other activities such as sensing, forwarding, and computing. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic environments.

• Journal of Information Processing Systems
• /
• v.5 no.3
• /
• pp.145-150
• /
• 2009

The awareness of boundaries in wireless sensor networks has many benefits. The identification of boundaries is especially challenging since typical wireless sensor networks consist of low-capability nodes that are unaware of their geographic location. In this paper, we propose a simple, efficient algorithm to detect nodes that are near the boundary of the sensor field as well as near the boundaries of holes. Our algorithm relies purely on the connectivity information of the underlying communication graph and does not require any information on the location of nodes. We introduce the 2-neighbor graph concept, and then make use of it to identify nodes near boundaries. The results of our experiment show that our algorithm carries out the task of topological boundary detection correctly and efficiently.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.119-128
• /
• 2024

The moveable ad hoc networks are untrustworthy and susceptible to any intrusion because of their wireless interaction approach. Therefore the information from these networks can be stolen very easily just by introducing the attacker nodes in the system. The straight route extent is calculated with the help of hop count metric. For this purpose, routing protocols are planned. From a number of attacks, the wormhole attack is considered to be the hazardous one. This intrusion is commenced with the help of couple attacker nodes. These nodes make a channel by placing some sensor nodes between transmitter and receiver. The accessible system regards the wormhole intrusions in the absence of intermediary sensor nodes amid target. This mechanism is significant for the areas where the route distance amid transmitter and receiver is two hops merely. This mechanism is not suitable for those scenarios where multi hops are presented amid transmitter and receiver. In the projected study, a new technique is implemented for the recognition and separation of attacker sensor nodes from the network. The wormhole intrusions are triggered with the help of these attacker nodes in the network. The projected scheme is utilized in NS2 and it is depicted by the reproduction outcomes that the projected scheme shows better performance in comparison with existing approaches.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.11
• /
• pp.1138-1143
• /
• 2006

Sensor deployment is an important issue in the mobile wireless sensor network. In this paper, we propose a deployment algorithm for mobile sensor network to spread out mobile sensor nodes widely as well as regularly. Since the proposed algorithm uses tree topology in deploying the sensor nodes, calculating power as well as spreading speed can be reduced compare to other deployment algorithms. The performance of the proposed algorithm is simulated using NS-2 simulator and demonstrated.

• Journal of Information Technology Services
• /
• v.6 no.1
• /
• pp.141-149
• /
• 2007

Sensor node's mobility brings new challenges to data dissemination in large sensor networks. Frequent location updates of sensor nodes can lead to both excessive drain of sensor's limited battery supply and increased collisions in wireless transmissions. Conventional studies for routing protocols in wireless sensor networks are not enough to cover energy consumption and migration of sensor nodes. This study proposes a dynamic routing protocol based on the SPIN considering energy consumption and the migration, and also shows the effectiveness of the proposed routing protocol.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.21-29
• /
• 2011

Wireless sensor nodes operate in open environments. The deployed sensor nodes are very vulnerable to physical attacks from outside. Attackers compromise some sensor nodes. The compromised nodes by attackers can lead to false data injection into sensor networks. These attacks deplete the limited energy of sensor nodes. Ye et al. proposed the Statistical En-Route Filtering (SEF) as a countermeasure of the attacks. The sensor node in SEF examines the event reports based on certain uniform probability. Thus, the same energies are consumed in both legitimate reports and false reports. In this paper, we propose a method that each node controls the probability of attempts to verify a report to reduce energy consumption of sensor nodes. The probability is determined in consideration of the remaining energy of the node, the number of hops from the node to SINK node, the ratio of false reports. the proposed method can have security which is similar with SEF and consumes lower energy than SEF.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.707-716
• /
• 2009

Wireless Sensor Networks are consisted of sensor nodes that communicated with each other to transmit information. Because sensor nodes have physically many limits, wireless sensor networks are hard to adopt for traditional networks. Transmissions are consumed most energy of sensor nodes. That's why energy-efficient transmission techniques and QoS support techniques for different kind of data are most important in wireless sensor networks. The thesis proposes the agent based framework for energy distribution and QoS in wireless sensor networks. Agents have its own behavior policy by means of a gene, which is optimized by genetic operations. Agents behavior to distribute energy consumption over sensor nodes. Simulation results show that the enhanced framework extends the lifetime of sensor nodes. Successful transmission ratios of emergency data and non emergency data are increased by 27% and 14%, respectively. Also, the results demonstrate that Qos of networks are improved.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.262-268
• /
• 2007

The efficient node-energy utilization in wireless sensor networks has been studied because sensor nodes operate with limited power based on battery. To extend the lifetime of the wireless sensor networks, maintaining balanced power consumption between sensor nodes is more important than reducing total energy consumption of the overall network. Since a large number of sensor nodes are densely deployed and collect data by cooperation in wireless sensor network, keeping more sensor nodes alive as possible is important to extend the lifetime of the sensor network. In this paper, we submit an efficient energy aware routing protocol based on AODV ad hoc routing protocol for wireless sensor networks to increase its lifetime without degrading network performance. The proposed protocol is designed to avoid traffic congestion on minor specific nodes at data transfer and to make the node power consumption be widely distributed to increase the lifetime of the network. The performance of the proposed protocol has been examined and evaluated with the NS-2 simulator in terms of network lifetime and end-to-end delay.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.271-276
• /
• 2014

The life-time and performance of a wireless sensor network is closely related to energy-efficiency of sensor nodes. In this paper, to increase energy-efficiency, each sensor node operates in one of three operational modes which are normal, power-saving, and inactive. In normal mode sensor nodes sense and transmit data with normal period, whereas sensor nodes in power-saving mode have three-times longer period. In inactive mode, sensor nodes do not sense and transmit any data, which makes the energy consumption to be minimized. Plus, the proposed algorithm can avoid unnecessary energy consumption by preventing transmitting duplicate sensed data. We implemented and simulated the proposed algorithm using Tiny OS based ZigbeX platfom and NS-2, respectively. Performance evaluation results show that the proposed algorithm can prolong sensor networks' lifespan by efficiently reducing energy consumption and its standard deviation of all sensor nodes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.341-351
• /
• 2008

Communication in wireless sensor networks comprising a plurality of sensor nodes located in an ad hoc environment is unidirectional in that data gathered by sensor nodes are transmitted to a sink node and not vice versa. In those networks, it is not possible for a server or a gateway to send commands to the sensor nodes to determine whether some previously received data are valid when the data indicate unusual conditions, which makes it difficult to make appropriate reactions to the unusual situations. This paper proposes and implements a TDMA-based sensor network communication protocol named BiWSLP(Bidirectional Wireless Sensor Line Protocol) supporting bidirectional communication capability. The BiWSLP is an extension of the WSLP, a unidirectional sensor network communication protocol based on the TDMA protocol. To test the feasibility of the proposed BiWSLP, we construct a virtual bridge management system capable of sending commands to sensor nodes as well as collecting data from the sensor nodes. Based on the test results of the virtual bridge management system, we show the applicability and advantages of the BiWSLP in terms of energy efficiency and bidirectional communication capability.