• Physical Therapy Korea
• /
• v.27 no.4
• /
• pp.272-277
• /
• 2020

Background: Forward head posture (FHP) is common postural malalignment. FHP is described relatively extension to upper cervical and lower cervical is relatively flexion. Although several researchers mentioned the lower cervical flexion posture in FHP, most of the studies related to FHP is focused on the deep cervical flexor function. Objects: The purposes of present study is to compare the cervical strength (upper cervical extension [UCE], lower cervical extension [LCE], upper cervical flexion [UCF], lower cervical flexion [LCF]) between individuals with and without FHP. Methods: Fifty-one participants are recruited. Participants who have the craniovertebral angle (CVA) less than 48 degree were classified to the FHP group (n = 24) and the others were included in without FHP group (n = 27). The cervical strength (UCE, LCE, UCF, LCF) were measured using Smart KEMA strength sensor and the strength data was normalized by body weight. All strength measurement conducted at head and neck neutral position in sitting. Independent t-test was used to compare the cervical strength between individuals with and without FHP. Results: The mean value of CVA was greater in without FHP group than with FHP group (p < 0.000). The strength value of UCF (p < 0.002) and LCE (p < 0.001) was significant less in FHP group than without FHP group. But no significant differences were seen in the LCF and UCE strength between two groups. Conclusion: UCF and LCE weakness in FHP group should be considered to evaluate and manage the individuals with FHP.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.140-146
• /
• 2022

Background: The superimposed technique (ST) involves the application of electrical muscle stimulation (EMS) during voluntary muscle action. The physiological effects attributed to each stimulus may be accumulated by the ST. Although various EMS devices for the quadriceps muscle are being marketed to the general public, there is still a lack of research on whether ST training can provide significant advantages for improving quadriceps muscle strength or thickness compared with EMS alone. Objective: To compare the effects of eight weeks of ST and EMS on the thicknesses of the rectus femoris (RF) and vastus intermedius (VI) muscles and knee extension strength. Methods: Thirty healthy subjects were recruited and randomly assigned to either the ST or EMS groups. The participants underwent ST or EMS training for eight weeks. In all participants, the thicknesses of the RF and VI muscles were measured before and after the 8-week intervention by ultrasonography, and quadriceps muscle strength was measured using the Smart KEMA tension sensor (KOREATECH Co., Ltd.). Results: There were significant differences in the pre- and post-intervention thicknesses of the RF and VI muscles as well as the quadriceps muscle strength in both groups (p < 0.05). RF thickness was significantly greater in the ST group (F = 4.294, p = 0.048), but there was no significant difference in VI thickness (F = 0.234, p = 0.632) or knee extension strength (F = 0.775, p = 0.386). Conclusion: EMS can be used to improve quadriceps muscle strength and RF and VI muscle thickness, and ST can be used to improve RF thickness in the context of athletic training and fitness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.931-942
• /
• 2010

A home network provides users with a variety of information services. The kind and quality of the services can be substantially enhanced by utilizing a variety of data from sensors. However, home networks currently limit their potential by focusing on providing multimedia services rather than services utilizing sensor data. Outdoor electronics are frequently made in a form that emphasizes only certain limited functions in contrast to home appliances. Thus, sensors with one or two functions rather than many can be used in outdoor systems and their use will be more economical than using sensor nodes indoors with more complex home appliances. In this study, we chose to work with motion sensors as they have many potential uses, and we selected a parking lot control system with to use the motion sensors. This parking lot control system was implemented and applied as part of a home network. For this purpose, we defined and implemented a protocol to manage the network in a ubiquitous sensor network environment for the wireless home network in this study. Although a network management system in a Ubiquitous Sensor Network (USN) related to this study is being advanced for other projects, the protocol interface and message system have not yet been clearly defined for use in a general purpose network or in an extension into heterogeneous kinds of networks, communication support, etc. Therefore, USN network management should be conducted for management of faults, composition, power, and applications. To verify the performance of the protocol interface designed in this study, we designed and implemented the necessary units (sensor nodes, sensor gateway, and server) for each network section and, with them, proved the validity of this study.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.427-432
• /
• 2010

It is important to efficiently elect the cluster header in Hierarchical Sensor Network, because it largely effects on the life duration of the network. Therefore, a recent research is going forward a research activity with regard to life time extension of the whole network for efficient cluster header election. In this paper, we propose the new Cluster Header Election Scheme in which the cluster is divided into Group considering Distance from a Sink, and a cluster header will be elected by node density of the Group. Also, we evaluate the performance of this scheme, and show that this proposed scheme improves network lifetime in Zigbee environment.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.419-444
• /
• 2014

Within this paper a new approach for early damage detection in rotor blades of wind energy converters is presented, which is shown to have a more sensitive reaction to damage than eigenfrequency-based methods. The new approach is based on the extension of Gasch's proportionality method, according to which maximum oscillation velocity and maximum stress are proportional by a factor, which describes the dynamic behavior of the structure. A change in the proportionality factor can be used as damage indicator. In addition, a novel deflection sensor was developed, which was specifically designed for use in wind turbine rotor blades. This deflection sensor was used during the experimental tests conducted for the measurement of the blade deflection. The method was applied on numerical models for different damage cases and damage extents. Additionally, the method and the sensing concept were applied on a real 50.8 m blade during a fatigue test in the edgewise direction. During the test, a damage of 1.5 m length was induced on the upper trailing edge bondline. Both the initial damage and the increase of its length were successfully detected by the decrease of the proportionality factor. This decrease coincided significantly with the decrease of the factor calculated from the numerical analyses.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.824-832
• /
• 2011

An essential consideration to differentiate prosthetic hand from robot hand is its convenience and usefulness rather than high resolution or multi-function of the robot hand. Therefore, this study proposes a myoelectric hand with a 2 DOF auto wrist module which has 6 essential functions of the human hand such as open, grasp, pronation, supination, extension, flexion, which improves the convenience of the daily life. It consists of the 3 main parts, the myoelectric sensor for input signal without additional attachment to operate the prosthetic hand, hand mechanism with high-torqued auto-transmission mechanism and self-locking module which guarantee the safety under the abrupt emergency and minimum power consumption, and dual threshold based controller to make easy for adopting the multi-DOF myoelectric hand. We prove the validity of the proposed system with experimental results.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.349-352
• /
• 2007

The Fourth Assessment Report of IPCC predicted that global warming is already happening and it should be caused from the increase of greenhouse gases by the extension of human activities. These global changes will give a serious influence for human society. Global environment can be monitored by the earth observation using satellite. For the observation of global climate change and resolving the global warming process, satellite should be useful equipment and its detecting data contribute to social benefits effectively. JAXA (former NASDA) has made a new plan of the Global Change Observation Mission (GCOM) for monitoring of global environmental change. SGLI (Second Generation GLI) onboard GCOM-C (Climate) satellite, which is one of this mission, provides an optical sensor from Near-DV to TIR. Characteristic specifications of SGLI are as follows; 1) 250 m resolutions over land and area along the shore, 2) Three directional polarization observation (red and NIR), and 3) 500 m resolutions temperature over land and area along shore. These characteristics are useful in many fields of social benefits. For example, multi-angular observation and 250 m high frequency observation give new knowledge in monitoring of land vegetation. It is expected that land products with land aerosol information by polarization observation are improved remarkably. We are studying these possibilities by ground data and satellite data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.275-284
• /
• 2008

In this paper we design and implement a management framework base on JMX to control and manage ubiquitous home networks. To do this, we organize the ubiquitous home network test-bed that consists of information electronics and sensor devices. In the test-bed network, we implement the management framework which can control and manage various applications and devices in home network environment. In addition, it can also define and add new services easily. Moreover, it is possible to provide various management interfaces with multi-protocols. The framework is formed to integrate legacy management systems readily.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1940-1946
• /
• 2011

In this paper, we propose a method of schoolzone safety to the protection and management of accident and crime of school circumstance that it is increased recently. Hence, sensor network based intelligent monitoring module must be considered for schoolzone safety. It is not simple CCTV monitoring, but it means that the ability extension is proposed to monitor the dangerous situation for the risk management. Hence, this paper proposes the design of monitoring module considering various danger situations that can be occurred around the school.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.77-77
• /
• 2018

천마(Gastrodia elata)는 연중생산을 위해 실내시설 재배 시 생육모델을 구죽하고, 생육단계에 따른 온도, 수분, $CO_2$ 등 환경 조건 설정이 필요하다. 본 연구는 천마의 생육단계 중 괴경형성기와 괴경비대기의 수분함량을 설정하여 최적의 환경조건을 찾기 위해 수행하였다. 먼저 괴경형성기 수분함량 공급은 괴경형성기에 -20kPa, -30kPa, -40kPa로 처리하여 120일간 배양한 뒤, 괴경비대기를 -40kPa로 고정하여 60일간 배양하였다. 반면, 괴경비대기 수분함량 공급은 괴경형성기를 -30kPa로 고정하여 120일간 배양한 뒤 괴경비대기에 -20kPa, -30kPa, -40kPa, -50kPa로 처리하여 60일간 배양하였다. Tensiometer(토양수분장력계)기를 설치하여 수분을 공급하였고, FDR센서 (UbiMas, CoCo sensor, Frequency domain reflectometry type)를 배양토의 깊이 5 cm와 15 cm에 2개를 설치하여 평균값으로 수분함량을 측정하였으며, 전체수량, 성마율, 종마율 등을 조사하였다. FDR센서로 수분함량을 측정한 결과, -20 kPa은 43.3%, -30 kPa은 34.7%, -40 kPa은 29.8%, -50 kPa은 25.3%로 측정되었다. 괴경형성기 수분함량 처리 후 수확기의 상자 당 전체수량은 -30 kPa일 때 985 g으로 가장 많았고, -40 kPa일 때 912 g, -20 kPa일 때 703 g으로 처리간의 유의적인 차이를 보였다. 성마율은 수분함량처리별 각각 25, 34, 30% 이었고, 종마율은 수분함량처리별 각각 53, 73, 65%로 나타났다. 따라서 -30 kPa 처리구가 다른 처리구에 비해 전체수량, 성마율, 종마율 등이 유의적으로 우수하였다. 괴경비대기 수분 함량 처리 후 수확기의 상자 당 전체수량은 -40 kPa일 때 992 g으로 가장 많았고, -50 kPa일 때 955 g, -30 kPa일 때 903 g, -20 kPa일 때 686 g 순으로 나타났다. -30 kPa에서 -50 kPa 사이에서는 전체 수량의 유의성 차이는 없었다. 성마율은 수분함량처리별 각각 20, 30, 35, 33%이었고, 종마율은 수분함량처리별 각각 45, 65, 75, 68%로 나타났다. 따라서 -40 kPa 처리구가 다른 처리구에 비해 전체수량, 성마율, 종마율 등이 유의적으로 우수하였다. 반면 -20 kPa 처리구는 과도한 수분으로 천마가 오히려 부패될 수 있는 환경조건이 조성됨에 따라 성마율, 종마율 등 전체적인 수량 감소에 영향을 미친 것으로 판단되었다.