• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.99-102
• /
• 2005

In order to development of diagnosis system for mold transformer, partial discharge measurement technique is recommended the best effective method for the evaluation of insulation condition on high voltage winding part. However, this technique was not applied to mold transformer yet. The purpose of this paper is to describe the method of partial discharge measurement for mold transformer with coupling sensor and measuring system. As we reviewed and developed the on-line partial discharge test technique, ceramic coupling sensor, measuring system, terminal box and index parameters.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.122-126
• /
• 2005

A technique for alignment to true north is presented based on synchronized measurements of vision image by a camera and output voltage of wind direction sensor. The true wind direction is evaluated by means of image processing techniques with least square sense, and then evaluated true value is compared with measured output voltage of the sensor. The uncertainty analysis about the component error for the proposed method in practical situation is performed. The proposed technique is applied to real meteorological tower (wind measuring tower) at the Daekwanryung test site. In addition, some uncertainty analysis of this method is presented.

• 한국정보통신학회논문지
• /
• 제24권5호
• /
• pp.662-665
• /
• 2020

Energy Efficiency in any WSN (Wireless Sensor Network) is a critical issue to elongate the life of the batteries equipped in sensors. LEACH(Low Energy Adaptive Clustering Hierarchy) is one of the mostly used routing algorithms which reduce the amount of transmitted data and save the energy in the network. In this paper, a new technique to select channels in routing algorithms is suggested and compared with the LEACH, ALEACH and PEGASIS. This technique forms clusters depending upon the node density as the deployement of the nodes is random. As a result, the proposed algorithm presents the better performance of the energy efficiency than those of the current algorithms.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.667-677
• /
• 2018

Since sensor networks consist of sensor nodes with limited energy resources, so efficient energy use of sensor nodes is very important in the design of sensor networks. Sensor nodes consume a lot of energy for data transmission. Clustering technique is used to efficiently use energy in data transmission. Recently, mobile sink techniques have been proposed to reduce the energy load concentrated on the cluster header near a sink node. The CMS(Cluster-based Mobile sink) technique minimizes the generation of control messages by creating a data transmission path while creating clusters, and supports the inter-cluster one-hop transmission. But, there is a case where there is no connectivity between neighbor clusters, it causes a problem of having a long hop data transmission path regardless of local distance. In this paper, we propose a SCBC(Strong connection balancing cluster) to support the path of the minimum number of hops. The proposed scheme minimizes the number of hops in the data transmission path and supports efficient use of energy in the cluster header. This also minimizes a number of hops in data transmission paths even when the sink moves and establishes a new path, and it supports the effect of extending the life cycle of the entire sensor network.

• ETRI Journal
• /
• 제34권5호
• /
• pp.713-718
• /
• 2012

Sensor nodes in ubiquitous sensor networks require autonomous replacement of deteriorated gas sensors with reserved sensors, which has led us to develop an encapsulation technique to avoid poisoning the reserved sensors and an autonomous activation technique to replace a deteriorated sensor with a reserved sensor. Encapsulations of $In_2O_3$ nanoparticles with poly(ethylene-co-vinyl alcohol) (EVOH) or polyvinylidene difluoride (PVDF) as gas barrier layers are reported. The EVOH or PVDF films are used for an encapsulation of $In_2O_3$ as a sensing material and are effective in blocking $In_2O_3$ from contacting formaldehyde (HCHO) gas. The activation process of $In_2O_3$ by removing the EVOH through heating is effective. However, the thermal decomposition of the PVDF affects the property of the $In_2O_3$ in terms of the gas reactivity. The response of the sensor to HCHO gas after removing the EVOH is 26%, which is not significantly different with the response of 28% in a reference sample that was not treated at all. We believe that the selection of gas barrier materials for the encapsulation and activation of $In_2O_3$ should be considered because of the ill effect the byproduct of thermal decomposition has on the sensing materials and other thermal properties of the barrier materials.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.169-176
• /
• 2019

Wireless sensor networks are used to monitor and control areas in a variety of military and civilian areas such as battlefield surveillance, intrusion detection, disaster recovery, biological detection, and environmental monitoring. Since the sensor nodes are randomly placed in the area of interest, separation of the sensor network area may occur due to environmental obstacles or a sensor may not exist in some areas. Also, in the situation where the sensor node is placed in a non-relocatable place, some node may exhaust energy or physical hole of the sensor node may cause coverage hole. Coverage holes can affect the performance of the entire sensor network, such as reducing data reliability, changing network topologies, disconnecting data links, and degrading transmission load. It is possible to solve the problem that occurs in the coverage hole by finding a coverage hole in the sensor network and further arranging a new sensor node in the detected coverage hole. The existing coverage hole detection technique is based on the location of the sensor node, but it is inefficient to mount the GPS on the sensor node having limited resources, and performing other location information processing causes a lot of message transmission overhead. In this paper, we propose an Adjacent Matrix-based Hole Coverage Discovery(AMHCD) scheme based on connectivity of neighboring nodes. The method searches for whether the connectivity of the neighboring nodes constitutes a closed shape based on the adjacent matrix, and determines whether the node is an internal node or a boundary node. Therefore, the message overhead for the location information strokes does not occur and can be applied irrespective of the position information error.

• 한국정보통신학회논문지
• /
• 제14권8호
• /
• pp.1836-1842
• /
• 2010

센서네트워크는 유비쿼터스 환경을 실현할 수 있는 기술로서, 최근 무인 경비 시스템이나 에너지 관리, 환경 모니터링, 홈 자동화, 헬스케어와 같은 다양한 분야에 적용 가능하다. 하지만 센서네트워크의 무선 통신 특성은 도청과 전송 메시지에 대한 위변조, 서비스 거부 공격에 취약하다. 현재 센서네트워크 상에는 안전한 통신을 위해 ECC(elliptic curve cryptography)를 통한 PKC(public key cryptography)암호화 기법이 사용된다. 해당 기법은 RSA에 비해 작은 키길이를 통해 동일한 암호화 강도를 제공하기 때문에 제한된 성능을 가진 센서상의 적용에 적합하다. 하지만 ECC에 요구되어지는 높은 부하 때문에 센서상의 구현을 위해서는 성능개선이 필요하다. 본 논문에서는 센서 상에서의 ECC를 가속화하기 위해 ECC연산의 핵심연산인 곱셈에 대한 최적화 기법을 제안한다.

• 한국정보과학회논문지:데이타베이스
• /
• 제37권2호
• /
• pp.82-91
• /
• 2010

네트워크 분야에서 데이터 압축은 네트워크 트래픽을 줄이기 위한 전통적이고 효과적인 방법 중 하나이다. 센서 네트워크의 데이터는 시/공간적인 연관성을 가지고 있으며, 이러한 특성을 이용한 데이터 압축 기법들이 많이 연구되고 있다. 센서 노드는 제한된 범위내의 통신이 가능하며, 자신의 통신 반경내의 데이터만을 활용한다. 만약 네트워크의 전체 데이터 분포 특성을 활용할 수 있다면, 데이터 압축의 효율을 증가시킬 수 있다. 본 논문에서는 네트워크 전체 데이터 분포 특성을 활용하기 위한 새로운 접근의 피드백 배포 기법을 통한 데이터 압축 기법을 제안한다. 제안하는 기법은 기지국 혹은 슈퍼 노드에 의해 수집된 데이터의 빈도를 이용하여 허프만 코드를 생성하고, 배포함으로써 네트워크 전체의 데이터 압축을 용이하게 한다. 본 논문의 우수성을 보이기 위해서 시뮬레이션을 통해 성능 평가를 수행하였으며 그 결과 네트워크의 수명이 약 30% 증가하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권4호
• /
• pp.1224-1248
• /
• 2022

In various sensor network applications, such as climate observation organizations, sensor nodes need to collect information from time to time and pass it on to the recipient of information through multiple bounces. According to field tests, this information corresponds to most of the energy use of the sensor hub. Decreasing the measurement of information transmission in sensor networks becomes an important issue.Compression sensing (CS) can reduce the amount of information delivered to the network and reduce traffic load. However, the total number of classification of information delivered using pure CS is still enormous. The hybrid technique for utilizing CS was proposed to diminish the quantity of transmissions in sensor networks.Further the energy productivity is a test task for the sensor nodes. However, in previous studies, a clustering approach using hybrid CS for a sensor network and an explanatory model was used to investigate the relationship between beam size and number of transmissions of hybrid CS technology. It uses efficient data integration techniques for large networks, but leads to clone attacks or attacks. Here, a new algorithm called SBEA (Snowball Endurance Algorithm) was proposed and tested with a bow. Thus, you can extend the battery life of your WSN by running effective copy detection. Often, multiple nodes, called observers, are selected to verify the reliability of the nodes within the network. Personal data from the source centre (e.g. personality and geographical data) is provided to the observer at the optional witness stage. The trust and reputation system is used to find the reliability of data aggregation across the cluster head and cluster nodes. It is also possible to obtain a mechanism to perform sleep and standby procedures to improve the life of the sensor node. The sniffers have been implemented to monitor the energy of the sensor nodes periodically in the sink. The proposed algorithm SBEA (Snowball Endurance Algorithm) is a combination of ERCD protocol and a combined mobility and routing algorithm that can identify the cluster head and adjacent cluster head nodes.This algorithm is used to yield the network life time and the performance of the sensor nodes can be increased.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.324-327
• /
• 2015

Scaffold is the most commonly used equipment in various types of construction works. Since various types of construction works use the same scaffold equipment, it becomes more difficult to be controlled and managed, thus resulting hazard frequently. According to the information announced in July 2012 by Council of Labor Affairs Executive Yan, the site collapse or incomplete anti-falling protection has led the site to accident frequently, and this is the main reason that causes construction industry occupational disasters. The labor death occupational hazard ratio rises up to 13% in scaffold activity, and the Council of Labor Affairs Executive Yan has showed that the death ratio is higher when using the scaffold in construction site, the total number of death has reached to 139 from 2005 to 2010. In order to ensure the safety of scaffold user, this study tends to build a wireless sensor monitoring system to detect the reliability and safety of the scaffold. The wireless sensor technique applies in this study is different with the traditional monitoring technique which is limited with wired monitoring. Wireless sensor technique does not need wire, it just needs to consider the power supply for establishing the network and receiving stable information, and it can become a monitoring system. In addition, this study also integrates strain gauge technique in this scaffold monitoring system, to develop a real-time monitoring data transfer mechanism and replace the traditional wired single project monitoring equipment. This study hopes to build a scaffold collapse monitoring system to effectively monitor the safety of the scaffold as well as provide the timesaving installation, low-cost and portable features.