• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2127-2133
• /
• 2010

In this paper, we proposed an architecture for supporting sensor transparency in sensor node operating systems, design the standard APIs (Application Programming Interfaces) and sensor device abstraction to provide the sensor transparency and implemented the sensor transparency in the TinyOS, the most well known sensor node operating system. With the proposed sensor node operating system which can support the sensor transparency, application developers can develop the target applications independent to each sensor device by using the standard APIs provided by the sensor node operating system and the sensor device manufacturers also can develop sensor device drivers by using the standard hardware interfaces and HAL (Hardware Adaptation Layer) interfaces independent to the specific hardware platform of sensor nodes.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.198-205
• /
• 2005

Recently, the systems using multiple sensors such as magnetic, acoustic and pressure sensor are used for detection of underwater objects or vehicles. Those systems have difficulty of maintenance and repair because they operate underwater. Thus, this paper describes a hybrid detection system with long term operating reliability. This has a multi-signal transmission structure to have a high reliability. First, a signal transmission & receiving part, which transfers data from underwater sensors to land and receive control message from land through optical cable, has 4 multi-path. Second, the nodes for signal transmission are connected dually each other with single-hop construction and sensors are connected to a couple of neighboring nodes. This enables the output signal to transmit from a node to the next node and the next but one node together. Also, the signal from a sensor can be transmitted to two nodes at the same time. Therefore, the system with this construction has high reliability in long term operation because it makes possible to transmit sensor data to another node which works normally although a transmission node or cable in system have some faults.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.998-1013
• /
• 2013

Wireless wearable sensor networks have emerged as a promising technique for human motion tracking due to the flexibility and scalability. In such system several wireless sensor nodes being attached to human limb construct a wearable sensor network, where each sensor node including MEMS sensors (such as 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope) monitors the limb orientation and transmits these information to the base station for reconstruction via low-power wireless communication technique. Due to the energy constraint, the high fidelity requirement for real time rendering of human motion and tiny operating system embedded in each sensor node adds more challenges for the system implementation. In this paper, we discuss such challenges and experiences in detail during the implementation of such system with wireless wearable sensor network which includes COTS wireless sensor nodes (Imote 2) and uses TinyOS 1.x in each sensor node. Since our system uses the COTS sensor nodes and popular tiny operating system, it might be helpful for further exploration in such field.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.499-500
• /
• 2007

The various sensor nodes operating in Ubiquitous Sensor Network environment require the tiny Operating System different from the existing pc-type operating system because of their characteristics. Also Sensor Network operating system needs to support the rapid event handling which sensor node must implement. In this paper, we overcome the drawbacks of the existing sensor network operating system and propose the new kernel which is designed to assist developer to construct event-central operating system entirely. We also evaluate the performance of the super tiny sensor network operating system based on proposed kernel, comparing with that of the existing sensor network operating system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.195-201
• /
• 2012

Environmental information monitoring system with a control system and a sensor node transfers real-time collected data from sensor node to the remote control system. Operability of the control system can significantly decrease depending on its operating environment, type of sensor and the number of sensor installed on the sensor node and the communication environment between the control system and sensor node. In this study, we proposed and implemented component-based environmental information monitoring system using the appropriate components depending on operating environment in order to increase operational efficiency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.616-625
• /
• 2011

Ensuring the designed prestress force is very important for the safety of prestressed concrete bridge. The loss of prestress force in tendon could significantly reduce load carrying capacity of the structure. In this study, an automated prestress-loss monitoring system for prestressed concrete girder using PZT-interface and wireless impedance sensor node is presented. The following approaches are carried out to achieve the objective. Firstly, wireless impedance sensor nodes are designed for automated impedance-based monitoring technique. The sensor node is mounted on the high-performance Imote2 sensor platform to fulfill high operating speed, low power requirement and large storage memory. Secondly, a smart PZT-interface designed for monitoring prestress force is described. A linear regression model is established to predict prestress-loss. Finally, a system of the PZT-interface interacted with the wireless sensor node is evaluated from a lab-scale tendon-anchorage connection of a prestressed concrete girder.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.13-19
• /
• 2004

A system for detecting underwater target demands a high operational reliability because of the difficulty of maintenance and repair when the system has a few troubles during long operating period. Therefore, in this paper, we have proposed a signal transport system with a high reliability in an underwater sensor array system composed of magnetic and acoustic sensors. In this system, the nodes for signal transport are connected dually each other with single-hop construction and a magnetic sensor is connected to a couple of neighboring nodes. This enables the output signal to transport from a node to the next node and the next but one node. Also, the signal from a magnetic sensor can be transported to two nodes at the same time. Thus, the system with this construction makes possible to transport sensor data to another node which works normally when a transport node or cable have some faults and will operate normally although it happens some problems in a few signal transport nodes and connection cables.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.242-250
• /
• 2007

Wireless sensor networks are subject to highly heterogeneous system requirements in terms of their functionality and performance due to their broad application areas. Though the heterogeneity hinders the opportunity of developing a single universal platform for sensor networks, efforts to provide uniform, inter-operable and scalable ones for sensor networks are still essential for the growth of the industry as well as their technological advance. As a part of our work to develop such a robust platform, this paper presents the software architecture for sensor nodes with focus on our sensor node operating system and its configuration methodology. Addressing principle issues in its design space which includes programming, execution, task scheduling and software layer models, our architecture is highly reconfigurable with respect to system resources and functional requirements and also highly efficient in supporting multi-threading under small system resources.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4536-4544
• /
• 2014

This paper proposes a development tool to efficiently develop node software for various operating system platforms in a sensor network. The proposed tool consisted of several modules, such as writing graphical model diagram, PIM and PSM design, code generation, and deployment file generation. Through the proposed tool, the users can graphically draw a sensor network model and design the PIM and PSM of the node software by setting the values of the predefined attributes. The source code of the node software is generated automatically from the PSM using the code templates of the target platform. The deployment files for installing node software on each node are generated automatically. The proposed tool helps the users to develop node software easily for a range of target platforms, even though they do not have details of the low-level information for a sensor network.