• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.183-189
• /
• 2020

In emergency rescue situations, the localization accuracy of the rescue requestor is a very important factor in determining the success or failure of the rescue. Indoors where Global Navigation Satellite System (GNSS) is not operated, there is no choice but to use Wi-Fi or LTE signals. However, the performance of the current emergency rescue system utilizing those RF signals is exceedingly low. In this study, the effectiveness of the surface correlation technology using the accumulated signal pattern of RF signals was verified in relation to the emergency localization technology. To validate the proposed system, we configured and tested an emergency rescue scenario in multi-floors building. When the emergency rescue was requested, it was confirmed that the initial localization error was large owing to the short length of the accumulated signal pattern. However, the localization error decreased over time, which eventually led to the accurate location information being delivered to the rescuer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.385-390
• /
• 2008

The Study of environment monitoring through huge network of wireless sensor node is worked with activity. The sensor nodes must be very small, light and low cost. The localization which may determine where a given node is physically located in a network is one of the quite important problems for wireless sensor network. But simple localization method is required as excluding the usage of GPS(Global Positioning System) by the limit condition such as the node size, costs, and so on. In this paper, very simple method using connectivity for the outdoor RF communication environment is proposed. The proposed method is demonstrated through simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.750-757
• /
• 2011

Wireless Sensor Network is composed of a lot of sensor nodes that are densely deployed in a field. So generally this sensor nodes are spreaded using Helicopter or Fixed wing. Each node delivers own location and acquired information to user when it detects specific events. In this paper, we propose localization algorithm without range information in wireless sensor network using helicopter. Helicopter broadcasts periodically beacon signal for sensor nodes. Sensor nodes stored own memory this beacon signal until to find another beacon point(satisfied special condition). This paper develops a localization mechanism using the geometry conjecture(perpendicular bisector of a chord) to know own location. And the simulation results demonstrate that our localization scheme outperforms Centroid, APIT in terms of a higher location accuracy.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.497-498
• /
• 2007

The most of important thing when we design a Wireless Sensor Network is resources. You have to consider energy efficient operation When you design Wireless Sensor Network. Because Sensor devices have a limited resources. In this paper, we proposed energy efficiency localization technique in Wireless Sensor Network. We used Cell ID technique for location search. This method can reduce power consumption and the network life time will be extension.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.133-140
• /
• 2016

In active sonar field, a target detection and localization based on a distributed sensor network has been much studied for the underwater surveillance of the coast. Zhou et al. proposed a target localization method utilizing the positions of target-detected sensors in distributed sensor network which consists of detection-only sensors. In contrast with a conventional method, Zhou's method dose not require to estimate the propagation model parameters of detection signal. Also it needs the lower computational complexity, and to transmit less data between network nodes. However, it has large target localization error. So it has been modified for reducing localization error by Ryu. Modified Zhou's method has better estimation performance than Zhou's method, but still relatively large estimation error. In this paper, a target localization method based on modified Zhou's method is proposed for reducing the localization error. The proposed method utilizes the geometry of the positions of target-detected sensors and a line that represents the bearing of target, a line can be found by modified Zhou's method. This paper shows that the proposed method has better target position estimation performance than Zhou's and modified Zhou's method by computer simulations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1291-1298
• /
• 2023

Surveillance reconnaissance sensor network is used for surveillance in wartime and area of operation. In this paper, we propose a target localization method using the detection signal strength of seismic sensors. Relay equipment calculates the target location using coordinate information and detection signal strength of the seismic sensors. Target localization error deviation due to environmental factors was minimized by subtracting the dynamic offset when calculating the target location. Field test shows improvement of target localization through reduction of errors. The average error was decreased to 3.62m. Up to 62% improved result was obtained compared to weighted centroid localization method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.65-75
• /
• 2009

In Wireless Sensor Network, the sensor node localization is important issue for information tracking, event detection, routing. Generally, in wireless sensor network localization, the absolute positions of certain anchor nodes are required based on the use of global positioning system, then all the other nodes are approximately localized using various algorithms based on a coordinate system of anchor DV-Hop is a localized, distributed, hop by hop positioning algorithm in wireless sensor network where only a limited fraction of nodes have self positioning capability. However, instead of uniformly distributed network, in anisotropic network with possible holes, DV-Hop's performance is very low. To address this issue, we propose Group based DV-Hop (GDV-Hop) algorithm. Best contribution of GDV-Hop is that it performs localization with reduced error compared with DV-Hop in anisotropic network.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2421-2423
• /
• 2002

A global ultrasonic sensor system for self-localization of an indoor mobile robot is proposed in this paper. By the global ultrasonic sensor system, it is meant several ultrasonic transmitters fixed at some positions in the world coordinate and the receiver in the moving coordinate of a mobile robot. In order to achieve the synchronization between an ultrasonic transmitter and receiver and to avoid the crosstalk among the ultrasonic transmitters, simple radio frequency transmitters and receivers are adopted. Experiments are carried out to verify the effectiveness of the proposed ultrasonic sensor system.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.1-14
• /
• 2005

This paper presents an obstacle detection algorithm based on the consecutive and the cooperative range sensor scanning schemes. For a known environment, a mobile robot scans the surroundings using a range sensor that can rotate 3600°. The environment is rebuilt using nodes of two adjacent walls. The robot configuration is then estimated and an obstacle is detected by comparing characteristic points of the sensor readings. In order to extract edges from noisy and inaccurate sensor readings, a filtering algorithm is developed. For multiple robot localization, a cooperative scanning method with sensor range limit is developed. Both are verified with simulation and experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1493-1504
• /
• 2010

The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose LME, the localization technique for multiple mobile nodes in mobile wireless sensor networks. In LME, collision of localization between sensor nodes is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we use CTS packet type for localization initiation by mobile node and RTS packet type for localization grant by anchor node. NTS packet type is uevento reject localization by anchor node for interference avoidance.nghe experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and LME provides efficient localization.