• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.111-116
• /
• 2003

LPG explosion characteristics in non-uniform concentration was investigated with a 270 liter explosion vessel of which the scale is 100 cm${\times}$60 cm${\times}$45 cm. Vented explosion and closed explosion system were used. Experimental parameter were position of ignition source, nozzle diameter and flow rate of gas. Non uniform concentration was controlled by the nozzle diameter and flow rate. Explosion pressure were measured with strain type pressure sensor and the flame behavior was pictured with the video camera. Based on this experimental result, it was found that the flow rate of gas and the duration of gas injection are important factor for mixing the gas in the vessel. And as the increase the non-uniformity of gas concentration, explosion pressure and pressure rise rate Is decrease but the flame resident time in the vessel is increase. Therefore gas explosion to fire transition possibility will increase in non-uniform concentration gas explosion.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.4
• /
• pp.43-53
• /
• 2016

In this paper, monitoring method of tool fracture using motor current was proposed for turning process. In order to take more reliable current signal, cutting force signal was compared as reference signal because cutting force signal is reliable, and analysis of signal correlation between cutting force and motor current was performed. The static components of the cutting force and motor current signals were correlated very well for different cutting conditions, and it was proven to use the motor current as an proper sensor for monitoring of tool fracture. To understand the characteristics of motor current, various kinds of cutting experiment were performed including tool fracture experiments. As a result, a new method to detect tool fracture using motor current in turing was proposed, and a large number of fracture experiments were carried out to evaluate the reliability of the proposed method. Finally, it can be possible to detect the tool fracture reliably.

• Korean Journal of Human Ecology
• /
• v.17 no.5
• /
• pp.963-973
• /
• 2008

Clothing pressure is closely connected with the degree of comfort of an athlete's tight-fitting garments. Therefore, the construction of sports garments is very important to the wearer's athletic performance. In this study, the fundamental relationship between the reduction rates of stretch fabrics and clothing pressure was explored with the aim of improving clothing comfort and obtaining a systematic pattern reduction for women's tight-fitting bodysuits. A women's bodysuit pattern was obtained by the draping method using a dressform. The basic pattern was divided into four parts and changed into reduced pattems according to the amount of fabric stretch determined by ASTM D2594. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 20 locations (shoulder, 9 locations; bust, 5; and armhole, 6). Among the 15 garments tested, the mean pressure of the A1 bodysuit was 4.60 $gf/cm^2$, and that of the C5 bodysuit was 22.98 $gf/cm^2$. The mean pressures of the bodysuits with reduction rates of 10% and 20% were below 10 $gf/cm^2$, while those of suits with reduction rates of 30%,40%, and 50% (except C5) were below 20 $gf/cm^2$. The pressure at the shoulder was 9.50$\sim$32.24 $gf/cm^2$, which was higher than that at the bust (3.34$\sim$24.56 $gf/cm^2$) and the armhole (0.95$\sim$12.15 $gf/cm^2$). The mean pressures of the 15 bodysuits were divided into five groups using analysis of variance (ANOVA), and were found to be significantly different (p<0.001). Regression analysis afforded the following expression: mean pressure ($gf/cm^2$) = 1.607 + 0.369[reduction rate (%)].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.296-303
• /
• 2014

Reference Broadcast Synchronization (RBS) is one of the most prominent synchronization protocols in wireless sensor nework. Given that the broadcasting medium is available, RBS can give very high accuracy of synchronization. However, RBS uses instantaneous synchronization and results in time discontinuity, which might cause serious faults in the distributed system. Also, RBS lacks packet loss tolerance, which brings about degraded performance in severe conditions of wireless channel. In this paper, the problem of time discontinuity in RBS is pointed out and the effect of packet loss on the performance of RBS is examined. Then, a continuous synchronization and a packet loss tolerance mechanism for RBS are proposed, and the result is verified through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.315-327
• /
• 2013

Wireless Body Area Network (WBAN) is a network around a human body within 3~5m which consists of medical or non-medical device. WBAN has to satisfy many kinds of demands such as low-power, a variety of data rate and a data priority. Especially, it is hard for the nodes for monitoring vital signs to replace battery. Thus energy and channel efficiency is important because the battery power is limited. In this thesis, a novel algorithm for reducing the energy consumption is proposed. The proposed algorithm adjusts transmission period according to traffic. by means of determining transmission period by amount of data, the node can reduce energy consumption. Energy detection is performed in order to guarantee data priority before attempting to transmit. In case of failing to transmit, it is proposed that energy consumption is reduced through avoiding collision by changing priority. The comparison result shows that the proposed algorithm reduces power consumption and increasing maximum channel efficiency by avoiding collision.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.6
• /
• pp.454-472
• /
• 2013

The development of wireless network technology and the increasing use of wireless networks to mobile users with a variety of wireless network systems has arisen. Wireless sensor networks, they can be nested together, and the need to switch between the network, depending on your needs. Next Generation Wireless Networks(NGWN) gives the mobile user a wide coverage and optimized service etc. Previous hand off management protocol is not enough to secure support of the NGWN application program. Cross-layer Handoff(CLH) protocol technique has been developed to support between and inside networks of handoff management of NGWN. CLH supports mobility management in a wireless network environment and also utilizes mobility speed and handoff signaling delay information to improve the handoff performance ability. For the analysis of handoff performance ability, we analyzed sensitivity of link layer and network layer, therefore, CLH technique is suggested based on this analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.153-163
• /
• 2013

As recent buildings have been more higher and larger, construction vertical lifting planning and operation is a key factor for successful project in tall building. Although many studies have been trying to set up a construction lifting planning system at early stage, there's not existing a control real-time lift operation control system with respect to during construction stage. Therefore, In this study, we use the sensor device to collect the lift operating data for improvement of lift operation efficiency and develope optimum lift operating system which can perform real-time analysis. Finally, we verify the efficiency of proposed system through comparison between realtime operating data and simulated data using proposing system. In this paper, the proposed system show more efficient moving line compared with previous system. This can contribute to development of unmanned lift system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.109-117
• /
• 2010

The ultimate purpose of this study is to propose a method to improve water supply management efficiency which is one of the two main approaches to solve the water supply-related problems. As an effort, targeting commercial water, a series of efforts was performed such as choosing a field area, selecting a sensing point, installing a sensor and server systems, and monitoring the real time data. Through the analyses of the real time data gathered, a series of water consumption trend analysis models were developed for each day and for each month. And Also proposed are the related utilization of the developed trend analysis models and a GIS. As a result of the aforementioned research, the proposed trend analysis technique is expected to offer some important role for the water supply forecasting agministation and management.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.54-63
• /
• 2014

It is general that the field plant is too large to be monitored by human works. So it is crucial to prepare one automated monitoring system to prevent unexpected accidents in advance. However, most of previous monitoring systems were to be implemented by human programmer independently, so the total developing cost of a set of similar monitoring systems is so high. In order to overcome this disadvantage, we propose a new specification language for meta-description of monitoring system. Also we propose a generation tool for monitoring system with the input meta-description files. Using these meta-description files, we show it is so fast and effective to get a new monitoring system for a specific field plant. In experiment we have shown that our generation system work successfully in newly developing a monitoring system for the water-vessel plant.