• 제목/요약/키워드: Sensor/Device

검색결과 2,496건 처리시간 0.03초

광중합 복합레진의 중합초기 동적 점탄성의 변화 (THE CHANGE OF THE INITIAL DYNAMIC VISCO-ELASTIC MODULUS OF COMPOSITE RESINS DURING LIGHT POLYMERIZATION)

  • 김민호;이인복
    • Restorative Dentistry and Endodontics
    • /
    • 제34권5호
    • /
    • pp.450-459
    • /
    • 2009
  • 본 연구의 목적은 새로 개발한 점탄성 측정기를 사용하여 수종의 광중합 복합레진의 초기 동적 점탄성 변화를측정하는 것이다. 본 연구에 사용된 점탄성 측정기는 세 부분으로 구성되었다. 첫째, 시편이 놓여지는 parallel plates; 둘째, DC 모터와 크랭크로 이루어진 회전진동전단변형 (Oscillatory shear strain)을 발생시키는 부분; 셋째, 전자기적 토크센서를 이용한 응력 측정 부분으로 구성되었다. 본 점탄성 측정기는 최대 2 Ncm의 토크를 측정할 수 있으며, 광중합기의 스위치는 컴퓨터와 연동하여 데이터 획득을 시작할 때 동시에 켜지도록 하였다. 본 연구에서는 시판 중인 6종의 광중합 복합레진 [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), Clearfil AP-X (CF)]을 사용하였다. 점탄성 측정기를 사용하여 동적 회전전단실험을 시행하였다. 직경 3 mm인 유리막대로 구성된 parallel plates 사이에 $14.2\;mm^3$의 복합레진을 적용시켰으며, 6 Hz의 진동수와 0.00579 rad의 진폭으로 변형을 가하고 발생된 응력을 측정하였다. 광중합이 시작됨과 동시에 측정이 시작되었으며, 광중합 후 10초 동안 점탄성의 변화를 관찰하였다. 각 복합레진에 대해 5 회 반복하여 측정하였고, 실험은 $25{\pm}0.5^{\circ}C$에서 진행되었다. 측정된 변형-응력 곡선으로부터 복소전단탄성계수 G*, 저장전단탄성 계수 G', 손실전단탄성 계수 G"를 구하였고 G*가 10 MPa에 이르는 시간을 구하였다. 각 재료의 복소전단탄성계수 G*와 10 MPa에 이르는 시간에 대해 일원분산분석 (One-way ANOVA)과 사후검정 (Tukey 검정)을 시행하였다 (${\alpha}$= 0.05). 결과는 다음과 같다. 1.본 연구를 위해 제작한 점탄성 측정기는 광중합 복합레진의 중합 초기 10초 동안의 동적 점탄성 변화를 신뢰성 있게 측정 할 수 있었다. 2. 모든 복합레진은 광조사 개시 후 $1{\sim}2$초의 불응기를 지난 다음 급격한 전단탄성계수의 증가를 보였다. 3. 모든 복합레진은 광중합 10 초간 손실전단탄성계수보다 저장전단탄성계수의 높은 증가를 보였다. 4. 광중합 초기 10초 후 복소전단탄성계수 값은 $150.3{\sim}563.7\;MPa$로, Z-100이 가장 높았고, 그 다음 Clearfil, Z-250, Z-350, Tetric Ceram, DenFil의 순이었다. 5. 복소전단탄성계수가 10 MPa에 이르는 시간은 Z-100이 2.55초로 가장 빨랐고, DenFil이 4.06초로 가장 느렸다.

봄·여름철 대기 중 미세먼지와 빗물 수질 상관성 분석 (Analysis of Correlation between Particulate Matter in the Atmosphere and Rainwater Quality During Spring and Summer of 2020)

  • 박혜민;김태용;허준용;양민준
    • 대한원격탐사학회지
    • /
    • 제37권6_2호
    • /
    • pp.1859-1867
    • /
    • 2021
  • 본 연구는 부산지역의 봄철과 여름철 대기 중 미세먼지(particulate matter, PM) 농도 및 빗물 수질을 정량화하고 다변량 통계분석을 이용하여 계절(봄, 여름) 특성에 따른 대기 중 PM 농도가 빗물 수질에 미치는 영향을 평가하였다. 연구기간(2020년 3월-8월)동안 기상청 AWS (automatic weather system)에서 측정된 대기 중 PM 농도와 총 68번의 강우 특성 자료를 이용하였으며, 총 68번의 강우 이벤트 중 13회 강우를 대상으로 부산 부경대학교 캠퍼스에 집수장치를 설치하여 총 216개의 빗물 샘플을 수집하였다. 빗물의 pH와 전기전도도(electrical conductivity, EC)는 실시간 측정되었으며, 빗물 내 양이온(Na+, Mg2+, K+, Ca2+, and NH4+) 및 음이온(Cl-, NO3-, and SO42-) 농도를 분석하였다. 또한, 자체 제작한 미세먼지 센서를 이용하여 강우 전후로 대기 중 PM10 농도를 측정하였으며, 측정된 데이터를 바탕으로 주성분 분석(principal component analysis, PCA)과 피어슨 상관분석(Person correlation analysis)을 실시하여 대기 중 PM10 농도와 빗물 수질 간 상관관계를 규명하였다. 연구결과, 부산지역의 일평균 대기 중 PM 농도 및 강우 특성은 계절적 차이가 존재하였으며, 대기 중 PM10 농도와 빗물 수질간 상관성 또한 상이하게 나타났다. 봄철의 경우, 일평균 대기 중 PM10 (34.11 ㎍/m3) 및 PM2.5 (19.23 ㎍/m3)의 평균 농도는 상대적으로 높게 나타났고 일평균 누적 강우량 및 강우 강도는 상대적으로 낮게 나타났다. 또한, 대기 중 PM10 농도는 빗물 수질과 유의미한 상관관계를 보였으며 대기 중 PM10 농도는 pH (r = -0.84)는 감소시키고 EC (r = 0.95) 및 수용성 음이온(r = 0.99) 농도는 증가시키는 요인으로 작용하였다. 여름철의 경우에는 일 평균 PM10 (27.79 ㎍/m3) 및 PM2.5 (17.41 ㎍/m3)의 평균 농도가 상대적으로 낮은 농도 분포를 보였으며, 최대 일 평균 강우 강도는 81.6 mm/h로 오랜 시간 많은 양의 비를 기록하였다. 상대적으로 낮은 대기 중 PM 농도와 높은 강우 강도로 인해 대기 중 PM10 농도가 빗물 수질에 미치는 영향을 확인할 수 없었다.

사용자 환경 모니터링을 위한 소형 자가발전 무선 데이터 송수신 시스템 개발 (Fabrication of Portable Self-Powered Wireless Data Transmitting and Receiving System for User Environment Monitoring)

  • 장순민;조수민;정윤수;김재형;김현수;장다연;라윤상;이동한;라문우;최동휘
    • Korean Chemical Engineering Research
    • /
    • 제60권2호
    • /
    • pp.249-254
    • /
    • 2022
  • 최근 반도체와 같은 정보통신 기술의 발전과 함께 사물인터넷(IoT) 기술 발전이 급격히 이루어지면서 센서와 무선 통신 기능을 내장하여 주변 사물 및 환경 조건을 감지 및 분석하여 대응하는 원격 환경 모니터링 기술이 주목받고 있다. 하지만, 기 개발된 원격 환경 모니터링 시스템은 모두 별도의 전원 공급 장치를 필요로 하기 때문에 시·공간적 기기 사용의 제한을 야기하여, 사용자의 불편함을 유발할 수 있다. 따라서, 본 연구에서는 생체 역학적 에너지의 역학적 특성이 고려된 기구학적 설계 기반 전자기 발전 소자(Electromagnetic generator, EMG)를 개발함으로써 이의 에너지 자립형 원격 환경 모니터링 구동을 위한 전원 공급 장치로써 활용한다. 낮은 진동 주기 및 큰 진폭 변화의 역학적 특성을 지닌 생체 역학적 에너지를 효과적으로 이용하기 위해 자석의 기구학적 배치를 통한 깨지기 쉬운 힘의 평형을 유도하는 Levitation-EMG (L-EMG)를 설계했다. 이를 통해, L-EMG는 외부 진동에 민감하게 반응하여 자석과 코일 간의 효과적인 상대 움직임을 야기하여 고품질 전기 에너지 공급을 가능하게 했다. 뿐만 아니라, 실제 환경 감지 센서와 무선 통신 모듈의 필요 전력을 최소화하기 위한 마이크로 컨트롤러(Micro control unit, MCU)를 구성하였으며, 내장기능 중 저전력모드(Sleep mode)를 접목하여 소비전력의 최소화 및 이의 구동시간 증가를 달성했다. 최종적으로 사용자의 편의성을 극대화하기 위해 휴대폰 어플리케이션을 구축하여 손쉽게 주변 환경 모니터링을 가능하게 했다. 따라서, 이번 연구는 생체역학적 에너지를 이용한 에너지 자립형 원격 환경 모니터링 구축 가능성을 검증할 뿐만 아니라, 더 나아가 별도의 외부 전원 없이 주변 환경 모니터링이 가능한 설계 방안을 제시할 수 있다.

과채류 육묘용 정밀 두상관수 시스템 개발 (Development of Precision Overhead Watering and Boom Irrigation System for Fruit Vegetable Seedlings)

  • 강동현;홍순중;김동억;박민정
    • 생물환경조절학회지
    • /
    • 제32권1호
    • /
    • pp.8-14
    • /
    • 2023
  • 본 연구에서는 육묘장에서 인력 또는 관행 자동관수장치의 활용도 조사를 통해 관수장치의 문제점과 그 개선점을 파악하여 균일관수가 가능한 스마트 관수장치를 개발하고 그 성능을 분석하였다. 자동관수와 인력관수의 평균 관수량은 각각 28.7±4.4g과 14.2±4.3g으로 두 조건 모두 변동계수가 30% 이내로 균일관수로 판단할 수 있다. 그렇지만 변동계수가 30%인 인력관수에 비해 자동관수는 15%로 균일도가 높았다. 개발된 균일관수장치에 탑재된 분사각이 80°인 노즐은 이론상 600mm 높이에서 가장 균일한 것으로 분석되었고, 균일관수 장치를 이용한 관수시험 결과 중앙부의 관수 균일도는 평균 대비 20% 이내이지만 가장자리부는 중앙부에 비해 50% 이상 관수량이 적었다. 균일관수장치를 활용한 토마토 접목묘 재배시험 결과, 시험기간 10일간 중앙부는 초장이 평균 72mm 생장한 데 비해 가장자리부는 평균 28mm 생장하여 가장자리부에 대한 추가 관수가 필요한 것으로 나타났다. 가장자리부 추가 관수장치를 부착하여 관수할 경우 중앙부에 비해 가장자리부의 관수량은 50% 이상이었으며, 중앙부에서는 분사각의 겹침으로 인하여 관수량의 차이는 발생하였으나, 그 차이는 30% 이내였다. 가장자리 집중관수 시스템 활용 시 각 지점별 생장 차이는 있으나, 10일간 생육을 비교하면 양측 가장자리의 평균 생장률은 24%, 중앙부의 평균 생장률은 26%인 점을 고려하면 균일관수장치에 비해 생장 균일도가 높았다. 모종의 초장 균일도 향상을 위해서는 관수장치의 진행방향에 거리센서를 설치하여 작물의 생장에 따라 관수장치의 높이를 조절이 필요할 것으로 판단된다.

영상처리기법을 이용한 다중 변위응답 측정 알고리즘의 검증 (Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique)

  • 김성완;김남식
    • 대한토목학회논문집
    • /
    • 제30권3A호
    • /
    • pp.297-307
    • /
    • 2010
  • 최근 토목, 건축 구조물의 유지관리 기술에 대한 관심이 커지고 있으며 구조물의 성능저하 및 노후화 등으로 구조적 안전성의 검토가 요구되는 구조물의 수가 급증하고 있는 실정이다. 그리고 구조물의 노후화 및 부재의 균열 등으로 인하여 강성이 저하되면 구조물의 동특성에 변화가 나타나게 되며 구조물의 실제 거동상태에서 동특성을 분석하여 손상부위와 손상정도를 정확히 판단하는 것은 중요한 문제이다. 구조물 모니터링에 사용되는 대표적 계측장비가 동적계측기이다. 기존의 동적계측기는 측정 센서와 장비를 연결하는 케이블 길이가 길어질 경우 신뢰할 수 있는 데이터를 얻기 힘들고 각 센서와 계측기를 1:1로 연결하는 방식을 취하고 있어 비경제적이다. 따라서 센서를 부착하지 않고 원거리에서 진동을 측정하는 방법이 필요하다. 구조물의 진동을 계측하기 위하여 적용 가능한 비접촉식 방법으로는 레이저의 도플러효과, GPS를 이용하는 방법 및 영상처리기법 등이 대표적이다. 레이저의 도플러효과를 이용하는 방법은 정확도가 상대적으로 높지만 비경제적이며, GPS를 이용하는 방법은 장비가 고가이고 신호 자체의 오차와 데이터 취득속도의 제약이 있는 단점이 있다. 그러나 영상신호를 이용하는 방법은 간편하고 경제적이며 접근이 어려운 구조물의 진동 및 동특성 추출에 적합하다. 기존에도 센서를 대신하여 카메라의 영상신호를 이용하는 연구가 수행되기도 하였으나, 기존의 방법은 구조물에 부착된 표적의 한 지점을 기록한 후 영상처리기법을 이용하여 진동을 측정하는 방법으로서 측정 대상이 비교적 국한적일 수 있다. 그러므로 본 연구에서는 영상처리기법을 이용하여 구조물의 다중 변위응답을 측정할 수 있는 방법의 타당성을 검증하기 위하여 진동대 실험 및 현장재하실험을 수행하였다.

Information Privacy Concern in Context-Aware Personalized Services: Results of a Delphi Study

  • Lee, Yon-Nim;Kwon, Oh-Byung
    • Asia pacific journal of information systems
    • /
    • 제20권2호
    • /
    • pp.63-86
    • /
    • 2010
  • Personalized services directly and indirectly acquire personal data, in part, to provide customers with higher-value services that are specifically context-relevant (such as place and time). Information technologies continue to mature and develop, providing greatly improved performance. Sensory networks and intelligent software can now obtain context data, and that is the cornerstone for providing personalized, context-specific services. Yet, the danger of overflowing personal information is increasing because the data retrieved by the sensors usually contains privacy information. Various technical characteristics of context-aware applications have more troubling implications for information privacy. In parallel with increasing use of context for service personalization, information privacy concerns have also increased such as an unrestricted availability of context information. Those privacy concerns are consistently regarded as a critical issue facing context-aware personalized service success. The entire field of information privacy is growing as an important area of research, with many new definitions and terminologies, because of a need for a better understanding of information privacy concepts. Especially, it requires that the factors of information privacy should be revised according to the characteristics of new technologies. However, previous information privacy factors of context-aware applications have at least two shortcomings. First, there has been little overview of the technology characteristics of context-aware computing. Existing studies have only focused on a small subset of the technical characteristics of context-aware computing. Therefore, there has not been a mutually exclusive set of factors that uniquely and completely describe information privacy on context-aware applications. Second, user survey has been widely used to identify factors of information privacy in most studies despite the limitation of users' knowledge and experiences about context-aware computing technology. To date, since context-aware services have not been widely deployed on a commercial scale yet, only very few people have prior experiences with context-aware personalized services. It is difficult to build users' knowledge about context-aware technology even by increasing their understanding in various ways: scenarios, pictures, flash animation, etc. Nevertheless, conducting a survey, assuming that the participants have sufficient experience or understanding about the technologies shown in the survey, may not be absolutely valid. Moreover, some surveys are based solely on simplifying and hence unrealistic assumptions (e.g., they only consider location information as a context data). A better understanding of information privacy concern in context-aware personalized services is highly needed. Hence, the purpose of this paper is to identify a generic set of factors for elemental information privacy concern in context-aware personalized services and to develop a rank-order list of information privacy concern factors. We consider overall technology characteristics to establish a mutually exclusive set of factors. A Delphi survey, a rigorous data collection method, was deployed to obtain a reliable opinion from the experts and to produce a rank-order list. It, therefore, lends itself well to obtaining a set of universal factors of information privacy concern and its priority. An international panel of researchers and practitioners who have the expertise in privacy and context-aware system fields were involved in our research. Delphi rounds formatting will faithfully follow the procedure for the Delphi study proposed by Okoli and Pawlowski. This will involve three general rounds: (1) brainstorming for important factors; (2) narrowing down the original list to the most important ones; and (3) ranking the list of important factors. For this round only, experts were treated as individuals, not panels. Adapted from Okoli and Pawlowski, we outlined the process of administrating the study. We performed three rounds. In the first and second rounds of the Delphi questionnaire, we gathered a set of exclusive factors for information privacy concern in context-aware personalized services. The respondents were asked to provide at least five main factors for the most appropriate understanding of the information privacy concern in the first round. To do so, some of the main factors found in the literature were presented to the participants. The second round of the questionnaire discussed the main factor provided in the first round, fleshed out with relevant sub-factors. Respondents were then requested to evaluate each sub factor's suitability against the corresponding main factors to determine the final sub-factors from the candidate factors. The sub-factors were found from the literature survey. Final factors selected by over 50% of experts. In the third round, a list of factors with corresponding questions was provided, and the respondents were requested to assess the importance of each main factor and its corresponding sub factors. Finally, we calculated the mean rank of each item to make a final result. While analyzing the data, we focused on group consensus rather than individual insistence. To do so, a concordance analysis, which measures the consistency of the experts' responses over successive rounds of the Delphi, was adopted during the survey process. As a result, experts reported that context data collection and high identifiable level of identical data are the most important factor in the main factors and sub factors, respectively. Additional important sub-factors included diverse types of context data collected, tracking and recording functionalities, and embedded and disappeared sensor devices. The average score of each factor is very useful for future context-aware personalized service development in the view of the information privacy. The final factors have the following differences comparing to those proposed in other studies. First, the concern factors differ from existing studies, which are based on privacy issues that may occur during the lifecycle of acquired user information. However, our study helped to clarify these sometimes vague issues by determining which privacy concern issues are viable based on specific technical characteristics in context-aware personalized services. Since a context-aware service differs in its technical characteristics compared to other services, we selected specific characteristics that had a higher potential to increase user's privacy concerns. Secondly, this study considered privacy issues in terms of service delivery and display that were almost overlooked in existing studies by introducing IPOS as the factor division. Lastly, in each factor, it correlated the level of importance with professionals' opinions as to what extent users have privacy concerns. The reason that it did not select the traditional method questionnaire at that time is that context-aware personalized service considered the absolute lack in understanding and experience of users with new technology. For understanding users' privacy concerns, professionals in the Delphi questionnaire process selected context data collection, tracking and recording, and sensory network as the most important factors among technological characteristics of context-aware personalized services. In the creation of a context-aware personalized services, this study demonstrates the importance and relevance of determining an optimal methodology, and which technologies and in what sequence are needed, to acquire what types of users' context information. Most studies focus on which services and systems should be provided and developed by utilizing context information on the supposition, along with the development of context-aware technology. However, the results in this study show that, in terms of users' privacy, it is necessary to pay greater attention to the activities that acquire context information. To inspect the results in the evaluation of sub factor, additional studies would be necessary for approaches on reducing users' privacy concerns toward technological characteristics such as highly identifiable level of identical data, diverse types of context data collected, tracking and recording functionality, embedded and disappearing sensor devices. The factor ranked the next highest level of importance after input is a context-aware service delivery that is related to output. The results show that delivery and display showing services to users in a context-aware personalized services toward the anywhere-anytime-any device concept have been regarded as even more important than in previous computing environment. Considering the concern factors to develop context aware personalized services will help to increase service success rate and hopefully user acceptance for those services. Our future work will be to adopt these factors for qualifying context aware service development projects such as u-city development projects in terms of service quality and hence user acceptance.