• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1631-1632
• /
• 2006

This paper reports on a flexible and biocompatible platinum thermoresistive temperature sensor for the application of an ultrasonic resonance thrombolysis device for ischemic stroke. The proposed flexible platinum temperature sensor consists of a polyimide substrate, a platinum thermoresistive element and a polyimide insulation layer. The temperature coefficient of resistance (TCR) and sensitivity of the designed temperature sensor were measured and calculated to be $2.63{\times}10^{-3}/^{\circ}C$ and $0.93^{\circ}C/sec$, respectively.

• 센서학회지
• /
• 제15권4호
• /
• pp.263-268
• /
• 2006

We have demonstrated a highly sensitive temperature sensor using an etched single mode fiber with a thermally expanded core region. Large core size of thermally expanded core facilitates access to evanescent wave by the wet etching. The etched region was surrounded by a low dispersive external medium with high thermo-optic coefficient. Due to the large difference between the dispersion property of the fiber and that of the external medium, the device reveals a cut-off properties at spectral region. The cut-off wavelength was shifted by the variations of the environmental temperatures because of thermo-optic effect of the external medium. The sensitivity of the fabricated device was found to be $45nm/^{\circ}C$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.739-742
• /
• 1997

A remote drum grappling device coupled to the anti-swing crane has been developed by KAERI to cope with problems involved in manually treating low level waste drums. In order for this grappling device to be operated effectively, multi-sensors including CCD camera were employed. As an activity representation scheme of the device, Extended State Machine (ESM) was used to descibe its operation sequences. The performance testing of the device was conducted successfully, and consequently its application could be extendable to industrial operation environment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1289-1297
• /
• 2011

Objective of this study was to characterize $PM_{10}$ sources on subway tunnels and development of simple particulate matters measuring device based on wireless sensor network. A new wireless sensor module, PMX, has been designed and manufactured to measure $PM_{10}$ and$PM_{2.5}$ simultaneously. The measurements have been conducted at a specific subway station on the Seoul metro line. The accuracy of the device was verified and compared with commercial measuring device based on weighting method.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1130-1132
• /
• 2007

In this research, 3D position exploring system was developed to detect direction and position of radiation source by using two general CCD camera. This system consists of a radiation detection device, a controlling device, and a monitoring device. A radiation detection device is composed of a collimator, a scintillator, CCD sensor, and radiation shielding part. Incident radiation is firstly collimated with direction and converted into visual lights in a scintillator. The CCD sensor detect the converted visual light and send a signal as an image. This can explore a radiation source with direction and distance from geometrical structure of two sensors. From these information, the developed 3D position exploring system can provide 3D radiation source information. This research will be useful for managing and processing radioactive materials in remote.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.950-955
• /
• 2005

This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2285-2289
• /
• 2005

Robot is composed of various devices but, those are incompatible with each other and hardly developing reusable control software. This study suggests standard abstract interface for robot software component to make portable device and reusable control software of robot, based on familiar techniques to abstract device in operating systems. This assures uniform abstracted interface to the device driver software like sensor and actuator and, control program can be transparent operation over device. This study can separately and independently develop devices and control software with this idea. This makes it possible to replace existing devices with new devices which have an improved performance.

• 한국재난정보학회 논문집
• /
• 제3권1호
• /
• pp.5-20
• /
• 2007

The role of a pavement means a social axis for the future as well as a function of road itself. To achieve its intended purposes, the maintenance technique of the pavement performance should be improved. For this, pavement investigators have dealt with the simulated pavement sites under actual environmental conditions. One of them is wandering device to improve the maintenance system of a pavement. The primary purpose of this research is to develop a portable wandering device using statistical analysis technique. It is noted that the new device using laser sensor demonstrates better field applications and reliability compare to the conventional one.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.51-55
• /
• 1999

Recently, manufacturing work has been transformed to advanced technology intensive form from mass production with a little items required in the past. It was demanded that superior workpiece surface integrity. However, the study of ductile mode machining was proceeded actively.In this paper, it is developed Ultra-Micro Indentation Device using the PZT actuator. Experimentally, by using theUltra-Micro Indentation device, the micro fracture behavior of the silicon wafer was invesgated. It was possible that ductile-brittle transition point in ultimate surface of brittle material can be detected by adding an acoustic emission sensor system to the Ultra-Micro Indentation apparatus.

• 마이크로전자및패키징학회지
• /
• 제9권4호
• /
• pp.25-29
• /
• 2002

기존 홀 센서의 단점을 개선하기 위해서 트랜치를 이용한 수직 홀 센서를 제작하였다. 수직 홀 센서는 센서의 칩 표면에 수평 자계를 검출할 수 있으며, 홀 센서는 실리콘 직접 본딩 기술에 의해 제작된 SOI 기판 위에 제작하였다. 기판 아래의 $SiO_2$층과 마이크로머시닝에 의한 트랜치가 홀 센서의 동작 영역을 정의한다. 홀 센서의 감도는 150V/AT로 측정되었으며 안정된 값을 나타내었다.