• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.514-519
• /
• 2000

This paper describes on the temperature characteristics of a SDB(silicon-wafer direct bonding) SOI(silicon-on-insulator) Hall sensor. Using the buried oxide $SiO_2$as a dielectrical isolation layer a SDB SOI Hall sensor without pn junction has been fabricated on the Si/ $SiO_2$/Si structure. The Hall voltage and the sensitivity of the implemented SOI Hall sensor show good linearity with respect to the applied magnetic flux density and supplied current. In the temperature range of 25 to 30$0^{\circ}C$ the shifts of TCO(temperature coefficient of the offset voltage) and TCS(temperature coefficient of the product sensitivity) are less than $\pm$6.7$\times$10$_{-3}$ and $\pm$8.2$\times$10$_{-4}$$^{\circ}C$ respectively. These results indicate that the SDB SOI structure has potential for the development of a silicon Hall sensor with a high-sensitivity and high-temperature operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.29-33
• /
• 2000

This paper describes on the temperature characteristics of a SDB(silicon-wafer direct bonding) SOI(silicon-on-insulator) Hall sensor. Using the buried oxide $SiO_2$ as a dielectrical isolation layer, a SDB SOI Hall sensor without pn junction isolation has been fabricated on the Si/$SiO_2$/Si structure. The Hall voltage and the sensitivity of the implemented SOI Hall sensor show good linearity with respect to the applied magnetic flux density and supplied current. In the temperature range of 25 to $300^{\circ}C$, the shifts of TCO(temperature coefficient of the offset voltage) and TCS(temperature coefficient of the product sensitivity) are less than ${\pm}6.7{\times}10^{-3}/^{\circ}C$ and ${\pm}8.2{\times}10^{-4}/^{\circ}C$, respectively. These results indicate that the SDB SOI structure has potential for the development of a silicon Hall sensor with a high-sensitivity and high-temperature operation.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.186-193
• /
• 2008

[ $Moir{\acute{e}}$ ] interferometry is an optical method, providing whole field contour maps of in-plane displacements with high resolution. The demand for enhanced sensitivity in displacement measurements leads to the technique of microscopic $moir{\acute{e}}$ interferometry. The method is an extension of the $moir{\acute{e}}$ interferometry, and employs an optical microscope for the required spatial resolution. In this paper, the sensitivity of $moir{\acute{e}}$ interferometry is enhanced by an order of magnitude using an immersion interferometry and the optical/digital fringe multiplication(O/DFM) method. In fringe patterns, the contour interval represents the displacement of 52 nm per fringe order. In order to estimate the reliability and the applicability of the optical system implemented, the measurements of rigid body displacements of grating mold and the coefficient of thermal expansion(CTE) for an aluminium block are performed. The system developed is applied to the measurement of thermal deformation in a flip chip plastic ball grid array package.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.154-161
• /
• 2014

Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.

• 한국통신학회논문지
• /
• 제38C권7호
• /
• pp.643-649
• /
• 2013

본 논문에서는 무선통신기기에서 필수적으로 사용되는 안테나의 근접 전자기장 변화에 의한 반사계수의 변화를 토대로 하여 사람의 심박신호를 검출한다. 반사되는 신호를 검출하기 위하여 20 dB의 directional coupler를 사용하여 송신신호에 영향을 주지 않고 안테나의 반사계수를 검출하는 회로를 사용하였다. 사람의 심박에 의한 다이폴 안테나의 반사계수는 약 0.07 dB 가량 변하게 되어 검출하기 어려우므로, 민감도를 향상시키는 방법을 적용하여 심박신호를 깨끗하게 잡아내었다. Discrete한 소자의 사용으로 오차가 발생하는 것을 감안하여 안테나의 위치를 움직여 최적 지점에서 더 좋은 심박신호의 결과를 나타내는 것을 확인하였고, 일반적인 통신신호에서도 가능한지 확인하기 위하여 4 MHz 대역의 FM신호를 사용하여 잘 동작하는 것을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제56권10호
• /
• pp.4042-4049
• /
• 2024

A new automatic group structure optimization method based on the perturbation theory was proposed for the few-group structure in two-step nuclear design procedure for VHTR. It applies the sensitivity coefficient of the perturbation theory which includes not only the effect of the cross section on the multiplication factor but also the adjoint weighted reaction rate. The sensitivity coefficient of the fine group for the multiplication factor was calculated and the group boundary for a few-group can be determined so that the summation of the fine group sensitivity for a few-group should be evenly distributed over every few-group. This method was successfully implemented in the ABGO code. VHTR-350 and MiHTR 2D core were used to investigate the performance and applicability of the proposed method. The code generated the new group structures for two cores and the error of the multiplication and reaction rate by the new group structure was compared with the result by the fine group structure. The comparisons indicate that the new group structure by the proposed method can provide the multiplication factor and reaction rates comparable to the existing group structure and more accurate results than the group structure obtained using the Contributon theory.

• 한국항행학회논문지
• /
• 제23권1호
• /
• pp.69-76
• /
• 2019

본 논문에서는 평면 유전체 기판의 유전율 측정을 위해 마이크로스트립 결함 접지구조를 기반으로 한 고감도 마이크로파 센서의 설계 방법에 대하여 연구하였다. 제안된 센서는 H-모양 개구의 리지 구조를 커패시터 기호 모양으로 변형하여 설계하였다. 제안된 센서의 감도를 기존의 이중 링 상보형 분할 링 공진기를 기반으로 한 센서의 감도와 비교하였다. 두 센서는 피 시험 기판이 없는 상태에서 전송 계수가 1.5 GHz에서 공진하도록 0.76 mm 두께의 RF-35 기판 상에 설계하고 제작하였다. 피 시험 기판으로 비유 전율이 2.17에서 10.2 범위에 있는 타코닉 기판 5종을 선택하였다. 실험 결과, 전송계수 공진주파수의 이동으로 측정된 제안된 센서의 감도는 기존 이중 링 상보형 분할 링 공진기를 기반으로 한 센서와 비교할 때 1.31배에서 1.62배 증가하는 것을 확인하였다.

• 산업융합연구
• /
• 제21권12호
• /
• pp.25-35
• /
• 2023

본 연구는 고등학생의 성 미디어 리터러시 인식과 성 태도가 성인지 감수성에 미치는 영향을 파악하기 위한 서술적 조사연구이다. 본 연구대상자는 D시에 소재하는 고등학생 120명으로, 연구에 자발적으로 동의 후 참여하였다. 자료는 2022년 11월 28일부터 12월 15일까지 수집되었으며, SPSS 22.0 프로그램을 사용하여 descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient 및 hierarchical regression analysis 방법으로 분석되었다. 연구결과, 성인지 감수성에 영향을 미치는 요인은 성 태도(β=-.317, p<.001), 아버지의 교육수준(β=.305, p<.001), 성별(β=.262, p=.001), 성 지식 출처(β=-.252, p=.001), 성 미디어 리터러시 인식(β=-.143, p=.045) 순으로 영향을 미쳤으며, 설명력은 41.6%로 나타났다(F=13.395, p<.001). 본 연구는 다양성이 강조되는 미래 사회에서 필수적인 역량으로 간주되는 성인지 감수성을 높이기 위해 학문적·실무적·정책적 제언을 하였다는 점에서 의의를 갖는다.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1758-1765
• /
• 2003

Monte Carlo simulation(MC) method was used as an uncertainty assessment tool for gas flow measurement in this paper. Uncertainty sources for gas flow measurement were analyzed, and probability distribution characteristics of each source were discussed. Detailed MC methodology was described including the effect of the number of simulation. The uncertainty result was compared with that of the conventional sensitivity coefficient method, and it was revealed that the results were different from each other for this particular gas flow measurement case of which the modelling equation was nonlinear. The MC was comparatively simple, convenient and accurate as an uncertainty assessment method, especially in cases of complex, nonlinear measurement modelling equations. It was noted that the uncertainty assessment method should be selected carefully according to the mathematical characteristics of the measurement.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.731-738
• /
• 2015

This study proposed the method of the multi-crack detection using the sensitivity coefficient matrix which is calculated from the change of eigenvalues and eigenvectors before and after the crack. Each crack is modeled by a rotational springs. The method is applied to the cantilever beam with miulti-crack. The eigenvalues and eigenvectors are determined for different crack locations and depths. The prediction of multi-crack detection are in good agreement with the results of structural reanalysis.