• 대기
• /
• 제23권2호
• /
• pp.171-186
• /
• 2013

Recently, the number of observations used in a data assimilation system is increasing due to the enormous amount of observations, including satellite data. However, it is not clear that all of these observations are always beneficial to the performance of the numerical weather prediction (NWP). Therefore, it is important to evaluate the effect of observations on these forecasts so that the observations can be used more usefully in NWP process. In this study, the adjoint-based Forecast Sensitivity to Observation (FSO) method with the KMA Unified Model (UM) is applied to two high-impact weather events which occurred in summer and winter in Korea in an effort to investigate the effects of observations on the forecasts of these events. The total dry energy norm is used as a response function to calculate the adjoint sensitivity. For the summer case, TEMP observations have the greatest total impact while BOGUS shows the greatest impact per observation for all of the 24-, 36-, and 48-hour forecasts. For the winter case, aircraft, ATOVS, and ESA have the greatest total impact for the 24-, 36-, and 48-hour forecasts respectively, while ESA has the greatest impact per observation. Most of the observation effects are horizontally located upwind or in the vicinity of the Korean peninsula. The fraction of beneficial observations is less than 50%, which is less than the results in previous studies. As an additional experiment, the total moist energy norm is used as a response function to measure the sensitivity of 24-hour forecast error to observations. The characteristics of the observation impact with the moist energy response function are generally similar to those with the dry energy response function. However, the ATOVS observations were found to be sensitive to the response function, showing a positive (a negative) effect on the forecast when using the dry (moist) norm for the summer case. For the winter case, the dry and moist energy norm experiments show very similar results because the adjoint of KMA UM does not calculate the specific humidity of ice properly such that the dry and moist energy norms are very similar except for the humidity in air that is very low in winter.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1796-1803
• /
• 2006

본 연구에서는 비선형성이 강한 대표적인 불안정한 시스템으로 새로운 제어 이론의 유효성을 실증하고 평가하기에 적합한 도립 진자 시스템의 강인 안정 및 강인 제어 성능을 확보하기 위하여 $H_{\infty}$ 제어 이론을 도입하여 최적 제어기를 설계하였다. 그리고, 저역통과 필터를 제어 대상 시스템과 종속으로 결합시켜 개루프 전달함수의 형성(loop shaping)을 시도함으로서, 감도함수 및 상보감도함수가 바람직 한 주파수 특성을 갖도록 하였다. 먼저, 설계한 $H_{\infty}$제어기를 도립진자 제어시스템에 적용하여 시뮬레이션 하였고, 그 결과를 전통적인 기법으로 산업현장에서 널리 사용하고 있는 PID제어기를 채용한 시스템의 출력과 비교하여 그 가능성을 확인하였다. 그런 다음, 설계 한 제어기를 실제 시스템에 적용하여 실험하였다. 시뮬레이션 및 실험 결과를 통해, $H_{\infty}$ 제어기는 모델링 오차, 외란 및 노이즈의 영향을 줄이면서 제어목표를 잘 추종하는 것으로 나타나 안정도 및 제어성능이 우수함을 확인할 수 있었다.

• 응용통계연구
• /
• 제33권5호
• /
• pp.541-553
• /
• 2020

Receiver operating characteristic (ROC) 곡선은 민감도와 특이도로 표현되며, ROC 곡선을 이용하는 최적분류점도 민감도와 특이도만을 반영하지만, 본 연구에서는 질병률과 효용을 추가하여 고려하는 기대효용함수를 연구한다. 특히 교차하는 ROC 곡선들의 area under the ROC curve (AUC) 값들이 유사한 경우에 특정한 부분의 부분 AUC를 비교해야 한다. 본 연구에서는 정의된 민감도 직선과 특이도 직선을 바탕으로 각각 높은 민감도와 특이도를 나타내는 부분 AUC를 제안한다. ROC 곡선들이 교차하고 동일한 AUC 값을 갖는 다양한 분포함수를 설정하여, 민감도 직선과 특이도 직선을 이용하여 구한 부분 AUC를 비교하면서 모형의 판별력을 향상시키는 방법을 제안한다.

• Molecular & Cellular Toxicology
• /
• 제4권4호
• /
• pp.338-347
• /
• 2008

Yeast RAD2, a yeast homolog of human XPG gene, is an essential element of nucleotide excision repair (NER), and its deletion confers UV sensitivity and NER deficiency. 6-Azauracil (6AU) sensitivity of certain rad2 mutants revealed that RAD2 has transcription elongation function. However, the fundamental mechanism by which the rad2 mutations confer 6AU sensitivity was not clearly elucidated yet. Using an insertional mutagenesis, PUF4 gene encoding a yeast pumilio protein was identified as a deletion suppressor of rad2${\Delta}$ 6AU sensitivity. Microarray analysis followed by confirmatory RT-qPCR disclosed that RAD2 and PUF4 regulated expression of HPT1 and URA3. Overexpression of HPT1 and URA3 rescued the 6AU sensitivity of rad2${\Delta}$ and puf4${\Delta}$ mutants. These results indicate that 6AU sensitivity of rad2 mutants is in part ascribed to impaired expression regulation of genes in the nucleotide metabolism. Based on the results, the possible connection between impaired transcription elongation function of RAD2/XPG and Cockayne syndrome via PUF4 is discussed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.127-134
• /
• 2004

In this paper, using an adjoint variable method, we develop a design sensitivity analysis (DSA) method applicable to heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume, respectively. Through several numerical examples, the developed DSA method is verified to yield very accurate sensitivity results compared with finite difference ones, requiring less than 0.3% of CPU time far the finite differencing. Also, the topology optimization yields physical meaningful results.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.40-47
• /
• 2002

In this study, and analytical method for ride sensitivity analysis of a train with non-linear suspension elements are proposed. Non-linear characteristics of springs and dampers for primary and secondary suspensions of a train are parameterized using polynomial interpolation. Vertical dynamic model of a three-body train running on straight rail with the predetermined roughness expressed in terms of spectral density function is set up and its equations of motion for ride analysis are derived. Using the direct differentiation method, sensitivity equations of the vertical dynamic model with respect to design parameters associated with non-linearity of suspensions are obtained. Based on the sensitivity analysis, improvement of ride is achieved by varying appropriate suspension parameters.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.58-64
• /
• 2005

주파수 영역 민감도 해석법은 동적 시스템의 전달함수에 대한 설계 파라미터의 변화에 의한 효과를 파악하기 위해 사용되어 왔으며, 이때의 민감도 함수는 시스템 설계 파라미터에 대한 시스템 전달 함수의 편미분 값이다. 일반적으로 종래의 주파수 영역 민감도 해석은 직접 미분법이나 라플라스 변환이 사용되어 왔다. 라플라스 변환을 사용하는 경우에 시스템의 차수가 증가할수록 역행렬 조작은 매우 많은 시간을 필요로 하며 또한 어려운 작업이다. 본논문에서는 이러한 다점을 보완하기 위하여 푸리에변환을 이용한 민감도 기법을 제시하였다. 파라미터의 변화에 대한 진폭-주파수 특성의 민감도 해석을 간단한 2자유도 모델과 로터 다이나믹 시스템에 적용하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.331-338
• /
• 2013

A new reliability calculation method is proposed based on design sensitivity analysis by the finite element method for nonlinear performance constraints in the optimal design of electromagnetic devices. In the proposed method, the reliability of a given design is calculated by using the Monte Carlo simulation (MCS) method after approximating a constraint function to a linear one in the confidence interval with the help of its sensitivity information. The validity and numerical efficiency of the proposed sensitivity-assisted MCS method are investigated by comparing its numerical results with those obtained by using the conventional MCS method and the first-order reliability method for analytic functions and the TEAM Workshop Problem 22.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.101-108
• /
• 2000

An optimum design algorithm using efficient reanalysis is proposed for reliability-based optimization problems formulated as the minimization of initial cost and expected failure cost with reliability constraints. The reliability-based optimization is high cost to evaluate objective function and constraints needed reliability analysis. Therefore the sensitivity analysis of reliability index for approximated reanalysis is necessary. In this paper, three solution approaches are suggested and tested. The approaches include : (1) sensitivity analysis using finite difference; (2) sensitivity analysis using automatic differentiation (AD); and (3) sensitivity analysis with respect to intermediate variables using AD. Numerical example is optimized to show the reliability and effectiveness of the new algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.566-573
• /
• 1999

This paper is the result of sensitivity analysis of derailment with respect to the selected suspension elements for the rail vehicle. Derailment phenominon has been explained by the derailment quotient. Thus, the sensitivity of derailment is suggested by a response surface model(RSM) which is a functional relationship between derailment quotient and characteristics of suspension elements. To summarize generation of RSM, we can introduce the procedure of sensitivity analysis as follows. First, to form a RSM, a experiment is performed by a dynamic analysis code, VAMPIRE according to a kind of the design of experiments(DOE). Second, RSM is constructed to a 1$\^$st/ order polynomial and then main effect fators are screened through the stepwise regression. Finally, we can see the sensitivity level through the RSM which only consists of the main effect factors and is expressed by the liner, interaction and quadratic effect terms.