• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.88-94
• /
• 2023

Recently, piezoelectric tactile sensors have garnered considerable attention in the field of texture recognition owing to their high sensitivity and high-frequency detection capability. Despite their remarkable potential, improving their mechanical flexibility to attach to complex surfaces remains challenging. In this study, we present a flexible piezoelectric sensor that can be bent to an extremely small radius of up to 2.5 mm and still maintain good electrical performance. The proposed sensor was fabricated by controlling the thickness that induces internal stress under external deformation. The fabricated piezoelectric sensor exhibited a high sensitivity of 9.3 nA/kPa ranging from 0 to 10 kPa and a wide frequency range of up to 1 kHz. To demonstrate real-time texture recognition by rubbing the surface of an object with our sensor, nine sets of fabric plates were prepared to reflect their material properties and surface roughness. To extract features of the objects from the detected sensing data, we converted the analog dataset to short-term Fourier transform images. Subsequently, texture recognition was performed using a convolutional neural network with a classification accuracy of 97%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.291-298
• /
• 2023

SRAM-based in-memory computing is one of the technologies to solve the bottleneck of von Neumann architecture. In order to achieve SRAM-based in-memory computing, it is essential to design efficient SRAM bit-cell. In this paper, we propose a low-power differential sensing 8+T SRAM bit-cell which reduces power consumption and improves circuit performance. The proposed 8+T SRAM bit-cell is applied to ripple carry adder which performs SRAM read and bitwise operations simultaneously and executes each logic operation in parallel. Compared to the previous work, the designed 8+T SRAM-based ripple carry adder is reduced power consumption by 11.53%, but increased propagation delay time by 6.36%. Also, this adder is reduced power-delay-product (PDP) by 5.90% and increased energy-delay- product (EDP) by 0.08%. The proposed circuit was designed using TSMC 65nm CMOS process, and its feasibility was verified through SPECTRE simulation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.3
• /
• pp.138-151
• /
• 2023

Korea's port infrastructure is rapidly aging, with old port facilities with more than 30 years of public life expected to surge from about 23% in 2019 to 47% in 2029. Traditional, aging ports lose competitiveness in logistics processing, reducing development around the port and increasing human casualties due to the human resource-based maintenance of the facilities. Therefore, it is necessary to solve this problem by establishing systematic management technology based on a digital twin. This research aimed to present the specific implementation steps of a digital twin reflecting smart port technology through cases of port infrastructure disasters, aging status, and smart ports. The study analyzed the port infrastructure linkage system and created and mapped scenarios essential for digital twin implementation. Three-dimensional (3D) modeling and simulation data for disaster and aging management among existing port infrastructure systems were collected. A digital twin port was implemented with 3D modeling. It implements a port digital twin simulation that links data such as sensing data and image data acquired from the port infrastructure in real time. Implementing a digital twin port for port infrastructure disasters and aging management can secure predictive port infrastructure management and disaster safety

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.45.2-46
• /
• 2020

Various processes, such as space weathering and granular convection, are occurring on asteroids' surfaces. Estimation of the surface exposure timescale is essential for understanding these processes. The Hayabusa mission target asteroid, (25143) Itokawa (Sq-type) is the only asteroid whose age is estimated from remote sensing observations as well as sample analyses in laboratories. There is, however, an unignorable discrepancy between the timescale derived from these different techniques. The ages estimated based on the solar flare track density and the weathered rim thickness of regolith samples range between 102 and 104 years [1][2]. On the contrary, the ages estimated from the crater size distributions and the spectra cover from 106 to 107 years [3][4]. It is important to notice that there is a common drawback of both age estimation methods. Since the evidence of regolith migration is found on the surface of Itokawa [5], the surficial particles would be rejuvenated by granular convection. At the same time, it is expected that the erasure of craters by regolith migration would affect the crater size distribution. We propose a new technique to estimate surface exposure age, focusing on the bright mottles on the large boulders. Our technique is less prone to the granular convection. These mottles are expected to be formed by impacts of mm to cm-sized interplanetary particles. Together with the well-known flux model of interplanetary dust particles (e.g., Grün, 1985 [6]), we have investigated the timescale to form such mottles before they become dark materials again by the space weathering. In this work, we used three AMICA (Asteroid Multi-band Imaging Camera) v-band images. These images were taken on 2005 November 12 during the close approach to the asteroid. As a result, we found the surface exposure timescales of these boulders are an order of 106 years. In this meeting, we will introduce our data analysis technique and evaluate the consistency among previous research for a better understanding of the evolution of this near-Earth asteroid.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.

• Korean Journal of Materials Research
• /
• v.33 no.9
• /
• pp.360-366
• /
• 2023

This study focuses on how the partial substitution of copper by nickel nanoparticles affects the electrical and structural properties of the Bi₂Ba₂Ca₂Cu_2.9Ni_0.1O_10+δ, Bi₂Ba₂Ca₂Cu_2.8Ni_0.2O_10+δ and Bi₂Ba₂Ca₂Cu_2.6Ni_0.4O_10+δ compounds. Approximate values of crystallization size and crystallization percentage for the three compounds were calculated using the Scherer, modified Scherer, and Williamson-Hall methods. A great similarity was observed in the crystal size values from the Scherer method, 243.442 nm, and the Williamson-Hall method, 243.794 nm for the second sample. At the same time this sample exhibited the highest crystal size value for the three methods. In the examination of electrical properties, the sample with 0.1 partial substitution, Bi₂Ba₂Ca₂Cu_2.9Ni_0.1O_10+δ was determined to be the best with a critical temperature of 100 K and an energy gap of 6.57639 × 10^-21 MeV. Using the SEM technique to analyze the structural morphology of the three phases, it was discovered that the size of the granular forms exceeds 25 nm. It was determined that the samples' shapes alter when nickel concentration rises. The patterns that reveal the distribution of the crystal structure also exhibit clear homogeneity.

• Composites Research
• /
• v.36 no.5
• /
• pp.342-348
• /
• 2023

There has been increasing demand for real-time monitoring of body and ambient temperatures using wearable devices. Graphene-based thermistors have been developed for high-performance flexible temperature sensors. In this study, the temperature coefficient of resistance (TCR) of monolayer graphene was controlled by coating polyethylenimine (PEI) on graphene surfaces to enhance its temperature-sensing performances. Monolayer graphene grown by chemical vapor deposition (CVD) was wet-transferred onto a target substrate. To facilitate the interfacial doping by PEI, the hydrophobic graphene surface was altered to be hydrophilic by oxygen plasma treatments while minimizing defect generation. The effect of PEI doping on graphene was confirmed using a back-gated field-effect transistor (FET). The CVD-grown monolayer graphene coated with PEI exhibited an improved TCR of -0.49(±0.03) %/K in a temperature range of 30~50℃.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.965-970
• /
• 2023

Wind profiler and wind lidar produce a vertical profile of winds in high spatiotemporal resolution in the atmospheric boundary layer. The wind lidar makes the wind vector using DBS (Doppler Beam Swinging) and VAD (Velocity Azimuth Display) methods. The DBS method has the advantage of obtaining a wind profile with a fast scan time. On the other hand, there is a restriction that requires at least two beams including vertical beam, which causes a decrease in the data acquisition rate. The VAD method was improved to produce more wind vector of the wind profiler as well as the wind lidar, which generally uses 5 beams. Fourier series was estimated with the radial velocity by the DBS method and wind vector was determined by setting the azimuth interval and applying the radial velocity by the Fourier series to the VAD method. The wind vectors were retrieved at the altitude where the wind was not calculated by the DBS method, and the results of the two methods were consistent.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.2
• /
• pp.93-98
• /
• 2024

This paper presents the method to extract the ultrawide-band (UWB) signal and proposes the simple impulse radar system for sensing real-based target within close-range area. The proposed impulse radar system consists of impulse generator, ultrawide-band antennas, function generator, and digital oscilloscope. It is verified by experiment that a differentiated Gaussian pulse is generated with 200ps of pulse width and corresponding spectrum from 0.3 to 4.7 GHz once a sinusoidal wave with 10MHz is excited. The Gaussian doublet is received by identical antennas and it is shown that the UWB pule width of 328ps and its spectrum is from 0.9 to 4.4 GHz. It is confirmed that the UWB pulse is extracted when the real-based targets such as circular target with 4cm radius and corner reflector are placed at the close-range area.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.308-317
• /
• 2009

In the present work, a sensor system composed of an oscillator sensor and a Lamb wave sensor is proposed for the purpose of structural health monitoring. The oscillator sensing system detecting the shift of a structural resonant frequency in proportion to the amount of defects in the structure is a pretty sensitive and simple device, but its detectable range is limited to its local zone. The Lamb wave sensor system, however, is applicable to global detection of the defects. This study is aimed at investigating the feasible combination of the two systems to exploits their merits simultaneously. The scheme to use PZT patches as the oscillator sensor as well as the Lamb wave sensor was proposed to identify the position, length and number of cracks by means of TOF and amplitude of signals, and its validity was confirmed through experiments.