• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.33-40
• /
• 2021

Recently, wearable computers equipped with various biosensors such as smart watches, smart bands, and smart patches that support daily health management of users as well as patients have been released. Users of wearable computers such as smart watches face various difficulties in performing biometric information processes such as data sensing, collection, transmission, real-time analysis, and feedback in a weak wireless and mobile biometric information service environment. In particular, the biometric information collection interface is an important basic process that determines the quality and performance of the entire biometric information service. So far, research has focused on sensing hardware and logic. This study intensively considers the interface method for effectively sensing and collecting raw biometric information. In particular, the process of collecting biometric information is designed and analyzed from the perspective of periodicity. Therefore, we propose an efficient and stable periodic collection method.

• Journal of Information Processing Systems
• /
• v.17 no.6
• /
• pp.1083-1096
• /
• 2021

Compressed sensing-based matching pursuit algorithms can estimate the sparse channel of massive multiple input multiple-output systems with short pilot sequences. Although they have the advantages of low computational complexity and low pilot overhead, their accuracy remains insufficient. Simply multiplying the weight value and the estimated channel obtained in different iterations can only improve the accuracy of channel estimation under conditions of low signal-to-noise ratio (SNR), whereas it degrades accuracy under conditions of high SNR. To address this issue, an improved weighted matching pursuit algorithm is proposed, which obtains a suitable weight value u_op by training the channel data. The step of the weight value increasing with successive iterations is calculated according to the sparsity of the channel and u_op. Adjusting the weight value adaptively over the iterations can further improve the accuracy of estimation. The results of simulations conducted to evaluate the proposed algorithm show that it exhibits improved performance in terms of accuracy compared to previous methods under conditions of both high and low SNR.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.338-347
• /
• 2021

In the case of occlusive dressings currently used in dressings for burn treatment, it is impossible to confirm the replacement time, so replacement is delayed, resulting in additional infection. To solve this problem, liposomes capable of bacterial sensing were prepared using 5(6)-Carboxyfluorescein, Phosphatidylcholine, 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine, Cholesterol, and 10,12-Tricosadiynoic acid. In this study, evaluation of changes in drug encapsulation rate in liposomes according to changes in three types of phosphatidylcholine phospholipids during liposome production, high-performance phosphatidylcholine phospholipids selected through vesicle size analysis, low and high temperature stability evaluation, bacterial sensitization ability evaluation, animals cell responses were assessed.

• Smart Structures and Systems
• /
• v.11 no.5
• /
• pp.453-476
• /
• 2013

DuraMote is a remote sensing system developed for the "NIST TIP project: next generation SCADA for prevention and mitigation of water system infrastructure disaster". It is designed for supervisory control and data acquisition (SCADA) of ruptures in water pipes. Micro-electro mechanical (MEMS) accelerometers, which record the vibration of the pipe wall, are used detect the ruptures. However, the performance of Duramote cannot be verified directly on a water distribution system because it lacks an acceptable recordable level of ambient vibration. Instead, a long-span cable-stayed bridge is an ideal test-bed to validate the accuracy, the reliability, and the robustness of DuraMote because the bridge has an acceptable level of ambient vibration. The acceleration data recorded on the bridge were used to identify the modal properties of the structure and to verify the performance of DuraMote. During the test period, the bridge was subjected to heavy rain, wind, and a typhoon but the system demonstrates its robustness and durability.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.835-839
• /
• 2004

For factory automation using force/torque control, we need a networked-force management system as well as good force sensing and force generation. In this paper, we present a web-based force management system including 6-axis force/torque sensing system. Performance of the force-torque sensor is affected significantly by analog noise that is included in a sensor signal, and the noise should be reduced appropriately to obtain an adequate performance of the sensor. Moreover, the sensor itself should be convenient to install to a real application system. It should be compact in size and also easy to wire in real situation. In this viewpoint, we developed usb-based compact sensor system which is well communicated using web between two computers that exist far away. Software is programmed using LabVIEW and CCS-C. PIC microcontrollers are used for implementing a compact hardware. The proposed system is verified through experimental works.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.111-115
• /
• 2009

Cognitive Radio (CR) technology is proposed for using the unused spectrum band efficiently because of the spectrum scarcity problems. Spectrum sensing is one of the most challenging issues in cognitive radio system. In this paper, we focus on the signal detection of WiBro system band. As most of the modulated signals can be treated as cyclostationary random process, we can detect the signal of the OFDM signals in WiBro system. OFDM symbols using WiBro system have several pilot subcarriers and periodic pilots have cyclostationary characteristic. To improve the detection performance, we get diversity gain using multiple antennas.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.241-246
• /
• 2016

This paper presents a method that can improve the performance of permanent magnet synchronous motor current control by minimizing the measured current phase delay caused by the Low Pass Filter(LPF) used to cut off the noises that flowed in when feedback currents are measured. Although existing methods that change the Cutoff Frequency of the LPF can minimize phase delays during high speed rotations, their noise cutoff effects are much lower and this may lead to the decline of control performance. Therefore, in this study, an algorithm that can compensate current phase delays through relatively simple calculations from the synchronous motor d-q axis coordinate transformation matrix and the inverse transformation matrix is proposed and the validity of the proposed method is verified by comparing the waveform of the calculated current with the waveform of actual currents through simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.68.5-68
• /
• 2002

For the performance test of rechargeable electric tools, it is necessary to test under the same condition as the actual operation condition. They are necessary to control the load torque and to acquire the test data with a computer, and it should be convenient to fix the tool on the test equipment for rechargeable electric tools. It consists of torque loading parts, sensing parts and control software. Two hysteresis brakes, connected serially with flexible coupling, were applied to control the load for the test. The sensing part consists of a torque sensor, a rpm detector and a power analyzer. The torque and the rpm were measured in order to calculate the output of the rechargeable electric...

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.562-565
• /
• 2008

Measuring system for piezo inkjet droplet and ink jetting status was developed. In order to measure the jetting performance, two different approaches have been used. One is to use the self-sensing capability of the piezo actuator in the printhead. The other is to use the droplet image from a CCD camera. The software as well as hardware using two approaches was developed. The self-sensing signal as well as meniscus motion was shown to be useful in monitoring jetting conditions. Furthermore, ink properties such as viscosity and speed of sound, which is related to jetting performance, can be understood.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.2
• /
• pp.63-68
• /
• 1999

This pper describes a digital sensorless drive of permanent magnet brushless DC motors. In order to detect in real time the rotor positions of which Emf becomes zero, terminal voltages are sampled during PWM duty cycle. This method generates detection error in indirect sensed position, which is the harmonic component of PWM frequency. In this paper, the drive adopted Butterworth low pass filter for rejection of the sensing error and for accurate estimation of commutation time. Analytical design process of the digital filter is proposed and the experimental results show that the performance of the proposed sensorless drive is superior to that of the sensorless drives without filterint.