• 제목/요약/키워드: Senser

검색결과 30건 처리시간 0.03초

GIS 절연진달을 위한 센서 구조별 주파수 특성 (Frequency response of Sensors for GIS insulation-diagnosis)

  • 최은혁;김정배;김기채;이광식
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 춘계학술대회 논문집
    • /
    • pp.413-416
    • /
    • 2007
  • If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulities to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important. The strip-senser measured impedance bandwidth of the proposed antenna is from 0.5[GHz] to 2.5[GHz] with the stop band from 0.5[GHz] to 1.7[GHz] for VSWR<2. The antenna is will play an important role for the senser for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

  • PDF

실시간 클라우드 시스템 플랫폼 구축을 위한, 스마트 디바이스와 센서 간 상호 운용성 연구 (A Base Study on Interoperability between Smart Device and Senser, for building Real Time Cloud System Platform)

  • 안성근;조정훈;정민우
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2013년도 추계학술발표대회
    • /
    • pp.501-504
    • /
    • 2013
  • Smart Device의 성능은 기존 Embedded System과는 비교가 무의미할 만큼 성장하였다. 하지만 실시간으로 외부의 다양한 데이터를 처리하기 위해서는 아직 Smart Device의 자원이 충분하지 않다. 이를 해소하기 위한 방안으로 신호의 처리와 관리는 풍부한 자원을 가진 서버에서 수행하고 스마트 기기는 신호 전달 및 처리 결과 수신의 제한적인 역할을 수행할 수 있는 Cloud System이 필요하며 덧붙여, 시스템을 다양한 계측 분야에서 유연하게 활용하기 위해 여러 종류의 신호들을 다양하게 처리해 줄 수 있는 Cloud Cluster와 이를 관리해줄 Platform의 구축이 이뤄져야한다. 본 연구는 그 중에서도 실시간성을 요하는 모델을 고려하여 Real Time Cloud System Platform의 구축을 위한 기반연구로서, Smart Device와 Senser 간의 Interoperability에 초점을 두고 Proto Type의 구현과 몇몇 세부 쟁점에 대한 실험 및 연구 분석 결과를 포함한다.

시각 장애인을 위한 정보전송 시스템 연구 (Study of Information Transmission System for Visually Impaired)

  • 이서영;최종엽;안상준;김정훈;박용욱
    • 한국전자통신학회논문지
    • /
    • 제12권6호
    • /
    • pp.1227-1232
    • /
    • 2017
  • 본 연구에서는 압력센서와 초음파센서를 사용하여 시각장애인이 교통 정보를 이용하는데 있어서 불편함과 교차로에서의 사고율을 줄이기 위한 시스템을 연구하였다. 압력센서를 이용하여 strip LED를 점등시켜 운전자가 보행자를 인식함으로써 사고율을 줄이고, 보행자 신호등 정보 외에 초음파센서와 블루투스를 통해 버스 위치 정보를 애플리케이션으로 전송하여 음성으로 들을 수 있도록 하였다.

전류미러회로를 이용한 직류전류센서의 비직성의 특성조사 (A study of Current Senser Using Current Mirror Circuit)

  • 유수엽;하재열;윤희상
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.256-257
    • /
    • 2006
  • 전류 미러회로를 이용한 직류 전류 센서를 이용하면 간단하게 전류센서회로를 구성할 수 있다. 더우기 Shunt 저항에서 낮은 전압을 이용하므로 효율적인 전류감지회로를 구성할 수 있다. 그러나 트랜지스터의 에미터 베이스 전압을 이용하므로 비 직선성이 두드러진다. 이 회로의 전류센서, 온도특성등 여러 전기적 물리적 특성을 이해하고 이를 마이크로프로세서를 이용하여 그 특성을 상쇄하는 구성을 고려하여 보기로 한다.

  • PDF

Sensorless Control of the Synchronous Reluctance Machine

  • Kilthau, A.;Pacas, J.M.
    • Journal of Power Electronics
    • /
    • 제2권2호
    • /
    • pp.95-103
    • /
    • 2002
  • The paper deals with the control of the synchronous reluctance machine without position senser. A method for the computation of the transformation angle out of terminal voltages and currents is presented. The injection of test signals allows operation at zero speed. Fundamental for this control scheme is the angle estimation method over the whole operating range including field-weakening is discussed in detail. The implementation of the angle estimation method in a rotor-oriented control scheme and practical results are demonstrated.

$NO_2$Gas Detection Characteristics of Octa-dodecyloxy Copper-phthalocyanine Langmuir-Blodgett(LB) Films

  • Koo, Ja-Ryong;Kim, Young-Kwan;Kim, Jung-Soo
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제11권10호
    • /
    • pp.78-80
    • /
    • 1998
  • Metallo-phthalocyanines(MPcs) are very sensitive to toxic molecules such as electron affinitive NO2 gas and also chemically and thermally stable since losts of MPcs have been studied for the potential chemcial gas sensors for $NO_2$ using their electrical conductivity. In this study, thin films of octa-dodecyloxy copper -phthalocyanine were prepared by Langmuir-Blodgett(LB) method and characterized by using UV/Vis absorption spectroscopy, and ellipsometry. It was found that the proper transfer surface pressure for the film deposition was 25mN/m and the limiting area per molecule was $112\AA$/molecule. The film thickness of one layer was $64\AA$. Current-voltage(I-V) characteristics of these films were investigated as a function of film thickness.

  • PDF

PSD의 출력특성향상을 위한 경사 입력광의 특성해석에 대한 기본연구 (Basic Study of the Improvement of PSD Output by Inclined Light Input)

  • 권현규;박창용
    • 한국기계가공학회지
    • /
    • 제9권4호
    • /
    • pp.53-58
    • /
    • 2010
  • In this paper, the output characteristics of PSD(Position Sensetive Detector) used in measurement system are described. Most of the precision measurment systems are accomplished by a laser diode(LD), a photo diode(PD) and PSD(Position Sensetive Detector), which are used in reflection of mirror or projection of infrared spectrometer. But it is especially restricted by resolution of PD and PSD in nano-measurement. A new inclined light methods into the PSD are employed in the surface measurement system for increasing the resolution. As the results, we can know that the output characteristics of detective senser (PSD) become more than 2 or 3 times by changing inclined angle(range: 5 degree) compared with common angle. In addition, the experiment results are confirmed that the change of inclined angle is not affecting to the linearity and repeating.

진동형 미세구조 각속도 센서의 공진 특성 해석 및 설계 (design and Resonant Characteristics Analysis of a Vibrating Angular Rate Senser of Microstructure)

  • 홍윤식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 춘계학술대회 논문집
    • /
    • pp.156-160
    • /
    • 1996
  • A vibrating angular rate sensor with tuning fork type resonator of microstructure (940*820 .mu. m$^{2}$) was designed and will be fabricated by polysilicon surface micromaching. The angular rate sensor is driven in a lateral direction by electrostatic force of comb drive electrodes, and vertical vibrations of the sensor, thich is detected capacitively, are produced by Coriolis forces due to an external angular rate. Mechanical Q factors and a difference between the frequencies of the two resonant modes, the driving mode and detecting mode, play a great role in increasing the sensitivity of the sensor. To be a highly sensitive sensor, it was designed to have as small frequency discrepancy of the two resonant modes as possible. Finite element method was used for the modal analysis. Several design parameters were selected and their contributions to the modal frequencies were investigated. A method was presented for tuning the detecting mode frequency by DC bias on the drive electrodes.

  • PDF